Karnataka

AOC

Works

Water supply/sewage lines

PROVIDING DRINKING WATER PIPELINE AT KARIBHAVI VILLAGE IN SHORAPUR TALUKA OF YADGIR DIST

Rural Drinking Water and Sanitation Department

RWSSD Division Office Yadagiri | Yadgir, Karnataka

Amount: ₹20.8 LCloses: 18 Apr 2026Closed

Timeline

Published5 Apr 2026
Closed18 Apr 2026
Awarded—

Bids

1 Bid18 Apr 2026

#	Company	Amount	Status
1	MARTHANDAPPA ₹20.5 Laccepted-aoc	₹20.5 L	accepted-aoc

Tender Value

₹20.8 L

EMD Value

₹50,000

Closing Date

18 Apr 2026, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

MANJULA AE

Mobile Number

Work Description

PROVIDING DRINKING WATER PIPELINE AT KARIBHAVI VILLAGE IN SHORAPUR TALUKA OF YADGIR DIST

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT9988

Reference Number

RWSSD/2026-27/WS/WORK_INDENT9988

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Two Tender Document System(Two Cover)

Location

RWSSD Division Office Yadagiri

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredThe Contractor Should Scan the PRED/PWD Registration Certificate.

RequiredThe Contractor Should Scan the PAN Card & GST No. Certificate.

RequiredTenderer shall obtain the work done certificate 50 percentage of the amount put to tender in single work & of similar nature of work from the competent authority not below the rank of Executive Engineer District Level Officer and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. Last 5 financial years

RequiredQuantity wise work done As shown in bid document

RequiredThe contractor should have yearly turnover not less than the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 Turn over Certificate, Certified by Chartered Accountant

RequiredThe contractor must scan the Assessed available tender capacity

RequiredDetails of Ongoing Works

RequiredThe contractor should upload the Line of Credit for value not less than 30 Percent of the Amount put to Tender

RequiredA Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

RequiredContractor Postal Address and Mobile No

RequiredAs Per Bid Documents

RequiredDifference amount less DD, Demand Draft to be Scanned and uploaded at time of submmition of tender

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Tenderer shall obtain the work done certificate 50% of the amount put to tender & of similar nature of work from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. (Last 5 financial years)

Third party consultants may be engaged for checking quality and quantity of work and to prevent any misuse. Proper reporting methods, through these agencies and their comments to be reviewed / addressed immediately at District level. Quality of work is of most importance

If any dates mentioned above happens to be a holiday, the next working day and the same time and venue holds good in lieu of the date mentioned

The contractor should scan the work done certificate, GST number, PAN and Registration certificates and other documents. If not scanned above certificates such tenders will be rejected

The authority competent to accept the tenders shall have the right of rejecting all or any of tenders without assigning any reasons and will not be bound to accept the lowest tenders

Materials like pipe, CI pipe, cement aggregate sand etc., required for the work shall be procured by the tenderer themselves and shall be of slandered quality as per IS specifications and should get tested by the quality control authority before used to the work at his own cost

The work will be placed under third party inspection

The lowest bidder will furnish security deposit amount before the work order is given or 20 days from the date of acceptance whichever is earlier(DD/FDR)

The contractor should have yearly turnover not less than Twice the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22 , 2022-23 , 2023-24, 2024-25 & 2025-26 (Turn over Certificate) (Certified by Chartered Accountant)

The contractor should upload the Line of Credit for value not less than 30% of the Amount put to Tender

Each Tenderer shall own or make arrangements for procuring the machineries required for executing the work & all the materials should be brought and used by the contractors and materials will not be supplied from the Department

The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately

Contractor should made an agreement within 14 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost

The contractor must scan the Assessed available tender capacity

Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims should be considered)

Acceptance / Cancellation of the works are reserved by under signed without any reasons for the same

Corrigendum / modifications / correction, if any, will be published in the website only. More details should be collected from the office at working hours

The Department is not responsible for any delay in accessing e-procurement portal

The contractor should follow terms and conditions as specified in standard bid document KW 1, 2, 3 or 4 whichever may be applicable

After opening of Technical bid, eligible bidders work done if required will be sent to work done verification to concerned authority, more than 7 days for conformation delay of work done will be rejected

Tenderer must submit his present accurate postal address and phone / cell phone number

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form

All other conditions as per bid document and tender conditions

Technical Criteria

Past Experience

Quantity wise work done (As shown in bid document)

Work Done Certificate

Tenderer shall obtain the work done certificate 50 percentage of the amount put to tender in single work & of similar nature of work from the competent authority not below the rank of Executive Engineer District Level Officer and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. Last 5 financial years

Work Done Certificate

Capabilities of Vendor

The contractor must scan the Assessed available tender capacity

Others -- BID CAPACITY

Details of Ongoing Works

Others -- Details of Ongoing Works

The Contractor Should Scan the PAN Card & GST No. Certificate

GST Registration

The Contractor Should Scan the PRED/PWD Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

The contractor should upload the Line of Credit for value not less than 30% of the Amount put to Tender

Line of Credit

The contractor should have yearly turnover not less than the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 (Turn over Certificate) (Certified by Chartered Accountant with UDIN Number)

Audited CA Certificate of Annual Turnover

Others

Difference less Demand Draft to be Scanned and uploaded at time of submmition of tender

Others -- LESS DD

As Per Bid Documents

Others -- As Per Bid Documents

Contractor Postal Address and Mobile No

Others -- Contractor Postal Address and Mobile No

A Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

Others -- A Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

Work Locations

Fee & Financial Details

Tender Fee Amount

₹520

EMD Fee Amount

₹50,000

Important Dates

Last Activity

18 Apr 2026

Published

5 Apr 2026

Bid Opening

21 Apr 2026

Download Ends

7 Apr 2026

BOQ Preview

•

PROVIDING DRINKING WATER PIPELINE AT KARIBHAVI VILLAGE IN SHORAPUR TALUKA OF YADGIR DIST

•

CONSTRUCTION OF SUMP : Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not ...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

•

ERECTION OF R.C.C. PRE-CAST HUME PIPE PUMP HOUSE : Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and ...

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...

•

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

PROVIDING 10.00 HP CENTRIFUGAL PUMP SET : Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments - 10 HP,...

•

Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards - pressure guage 80MM

•

Supply and delivery at site brand new best make level guage suitable for centrifugal pump confirming to latest IS standards.

•

Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments - 7.5 to 10 HP centrifugal pump

•

Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments.

•

Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments

•

Providing and fixing LT cable of size 4 x 25 Sqm suitable for centrifugal pump sets with ISI mark and its latest amendments

•

Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments.

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

PROVIDING AND LAYING PIPE LINE : Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and u...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

GESCOM CHARGES (POWER SUPPLY) : PART-A MATERIAL COST : 279013-11kV, Special 3pin X, arm - MS

•

279140-Anchor Rod using 12mm rounds/G

•

279146-Turn buckle (GI)

•

279503-PCC Pole clamp - MS

•

279650-Guy clamp - MS

•

281110-7/10 SWG Guy Wire

•

283040-DISC Insulators 45kN

•

283166-NO.15 Strain Insulator

•

284108-Rabbit ACSR Conductor

•

733616-B & N Size 16X65mm

•

733634-B & N Size 16X225mm

•

LABOUR COST : Fixing of V-Shape/ Horizontal cross arm including single top support Braces and Insulators fixing.

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

For Rabbit ACSR

•

PART-B MATERIAL COST : 200105-RCC Pole-9.0M Long,145 kg WL

•

278911- Barbed wire (10 mts.)

•

279111-25/63kVA T.C.Sets (For star ra

•

279140-Anchor Rod using 12mm rounds/G

•

279146-Turn buckle (GI)

•

279149-11kV G.O.S.Mounting H-Frame se

•

279650-Guy clamp - MS

•

279800-Fish Plate - MS

•

281008-8 SWG G.I.Wire

•

281110-7/10 SWG Guy Wire

•

281674- G.I.Grounding pipe, B-Class, 4

•

283005-11kV Pin Insulator (Shell onl

•

283040-DISC Insulators 45kN

•

283055-11kV Pin Insulator (G.I Pin o

•

283166-NO.15 Strain Insulator

•

284503-LT Spacer for TC Wiring

•

285549-Weasel to Rabbit

•

289029-PVC Wire-50 Sq.mm

•

301107-L.T.Protection kit

•

302122-11kV Class, Solid core Set/ 3 Nos

•

303200-L.A. 9kV, 5kA, Metal Oxide

•

304212-11kV G.O.S 200A Single break

•

321437-25kVA, Aluminum Wdg, BEE 4 Sta

•

600095-Good Quality well burnt Charco

•

607054-Good Quality Salt for groundi

•

LABOUR COST : Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

•

G.I. Barbed Wire (12 mtrs/1kg)

•

Erection of pole Upto 63 kVA with 9 mtrs. RCC pole

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

Errection of H Frame.

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

Wiring for lightinh/power circuit using one of PVC insulated 1100v grade stranded Aluminum unsheathed wire 4 Sq mm single core/multi core cable in open or cocealed system of wiring

•

Fixing of LT Protection Kit

•

HG fuse 11 kv Solid core type(3 nos)

•

Fixing of 3 Nos lightning arrestors including wiring.

•

Fixing of GOS including wiring (11kV SB 200A)

•

a) Erection of 25-63 kVA Transformer on Transformer structure.

•

PART-C MATERIAL COST : 200006-PSC Pole-9.0M Long,200 kg WL

•

200105-RCC Pole-9.0M Long,145 kg WL

•

279014-L.T. 4Pin X arms - MS

•

279140-Anchor Rod using 12mm rounds/G

•

279146-Turn buckle (GI)

•

279523- RCC Pole clamp - MS

•

279650-Guy clamp - MS

•

281683 - Spiral Earth Electrode

•

283158-NO.8 Strain Insulator

•

284108-Rabbit ACSR Conductor

•

733616-B & N Size 16X65mm

•

733634-B & N Size 16X225mm

•

LABOUR COST : Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

•

Head loading of the pole 105 to 185 Mtrs

•

Loading & unloading of 9 mtr RCC/PSC poles

•

Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

•

Fixing of 4 Pin cross arm with insulator and Braces fixing

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

Providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.)

•

For Rabbit ACSR

•

Electrical Inspectorate Charges 600

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-2 KEMBHAVI - 9988.docx

Tender Document • 0.10 MB

Conditions of PIPELINE WORKS 2026-27.pdf

Instructions to Tenderers • 1.55 MB

00 loc.docx

Others - FORMAT OF LINE OF CREDIT • 0.01 MB

Drawings.pdf

Design Document • 1.75 MB

Notification of KKRDB PIPELINE WORKS.pdf

Others - TENDER NOTIFICATION • 0.72 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

MARTHANDAPPA

₹20.5 Laccepted-aoc