Provn of certain LBW and Special repair E/M works at Kapurthala Mil Stn under GE Kapurthala.

Amount

Dismantling/Taking out /down old unserviceable cross arms of MS channel and angle iron etc. complete all as specified and as directed by Engr-in-Charge.

Dismantling/Taking out insulator of any type,any size complete all as specified and as directed by Engr-in-Charge.

Dismantling/Taking out old unserviceableACSR conductor/GI wire complete all as specified and as directed by Engr-in-Charge.

M&L for tube light gread GI laid under road/culvert/drain fixed to pole wall with help of flat iron clamps etc for cable protection for the following sizes :- make: JINDAL/TATA

(a) 40 mm nominal bore

(b) 50 mm nominal bore

Supply and lay cable XLPE Insulated, galvanized steel or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and as directed by Engr-in-Charge.

-do- all as per item No 05 above but 16 sqmm, 2 core.

-do- all as per item No.05 above but 16 Sqmm 4 core.

Supply and lay cable XLPE Insulated, galvanized steel or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and as directed by Engr-in-Charge.

-do- all as per item No.08 above but 35 Sqmm 3.5 core.

-do- all as per item No.08 above but 50 Sqmm 3.5 core.

-do- all as per item No.08 above but 70 Sqmm 3.5 core.

-do- all as per item No. 08 above but 95 Sqmm 3.5 core.

-do- all as per item No. 08 above but 120 Sqmm 3.5 core.

S & F MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA, suitable for isolation, adjustable over load from 0.4-1.0In and adjustable short current from 2-12Ir also inbuilt ground fault protection available 20% to 100% of In complete all as specified and as directed by Engr-in-Charge.

S & F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and as directed by Engr-in-Charge.

S & F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA suitable for isolation, adjustable over load from 0.4-1.0In and adjustable short current from 2-12Ir also inbuilt ground fault protection available 20% to 100% of In complete all as specified and as directed by Engr-in-Charge.

S & F in replacement of On load change over Switch 250 Amps, Modular construction, positive isolation and door interlock and padlock facility in sheet steel enclosure, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 9.0 metres long, complete all as sepcified and directed by engr-in-charge.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate for fdn of poles, stay etc complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B2 using 20mm graded for padestal coping incl necessary formwork finished fair using extra cement complete all as specified and as directed by Engr-in-Charge..

Supply & fixing energy saving LED street light 60 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lences with IP66 Protection. 10KV SPD included efficiency 110Lm/W, input voltage from 120-270 V power factor above 0.95 complete fitting including all accessories and suitable size bracket for hanging of light with 2 Nos clamp for fixing of GI pipe on pole with 3 core 2.5 sqmm PVC insulated aluminium cable upto control box to light fitting complete all as specified and directed by Engr-in-Charge . Make Crompton Cat part No LSTP-60 CDL-M complete all as specified and as directed by Engr-in-Charge. Make : Crompton or equivalent of Philips/Havells.

Supply and fixing of junction box for street/security light made of PVC Body comprising of MCB 16 Amps -01 No SP, bus nar of 50 Amps rating aluminium for phase and neutral on porcelain based insulators with locking arrangement fixed to pole with MS clamps of size 20 x 3 mm , nuts, bots and washers complete all as specified and directed.

Earthing complete for transformer/VCB/ panels with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically at a depth not less than 2.25 meters belownormal ground level with top edge of the plate at a depth not less than 1.5 metres below normal ground level, connected with and including GIstrip 32 mm x 6 mm in and including GI pipe 50 mm bore light grade as protection pipe (from top earth plate up to the test point) by means of GI bolts, nuts, check nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15 cm thick, all around including top and bottom and watering pipe 20 mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300 mm x 300 mm x 300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20 mm graded stone aggregate and RCC cover ( 1:2:4) type B-1 using 20 mm graded crushed stone aggregate of 25 mm thick with 2 Nos MS handles of 12 mm dia including necessary excavation /earth work in any type of soil/rock and as shown in Electrical plate no 3 of SSR Part-I (2009) testing on completion complete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and directed.

Returning, filling the soft / loose soil including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supply, fabricating installation, testing and commissioning and electrically connected LT panel outdoor cubical type factory made of CRCA sheet 3.15 mm thick machine pressed and angle iron frame 40x40x6mm in around the Panel body & legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer complete and suitable 440 volts AC 3 phase 4 wire Copper bus bar of each capacity 400 Amp & strips fully mounted on porcelain insulator enclosed chamber with openable shutter both sides including PCC plinth 2mtr x 1mtr and height of plinth 45 cm from ground level including suitable dia GI pipe light grade fixing with the PCC plinth for cable incoming and outgoing comprising with following complete all as specified.

(i) MCCB Four Pole 400Amps, 35 KA (Incoming) 01 Nos

(ii) MCCB Four Pole 200 Amps 25 KA (outgoing) 04 Nos

(v) Indicator lamp set RYB " LED TYPE) 03 Nos

Supply and fix in replacement of Time light distribution board analog Time switch 230 volt three phase of 16 Amps rating with contactor fixed inside steel enclosure box and fixed to pole/LT Panel including clamps, nuts, bolts and washers etc complete all as specified and directed.Make Indo-Asian cat part No TL016ABO or equivalent in Legrand/Scheneider

Disconnecting & dismantling of old unserviceable security/street light fitting any type / size with accessories including GI bracket and clamps bolts etc from Pole/wall and stacking complete all as specified and as directed.

Supply, fix, connect and test LED street light fitting 45 Watts (or above watt) IP 66 with PDC Aluminium body and toughened glass visor fitted in frame, separate driver compartment provided, secondary optical lens for superior light distribution efficiency >95 Lm/W, CCT5700K IP-65, input voltage from 120-270 V power factor above 0.95 complete fitting including all accessories Note : Contractor shall provide 1 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion. Make : Crompton FREEDOM NEO Product code LSTS-45-CDL-M and C&S electric Cat part No LTESS 18 X 2.5 HPLED/LS Product Code INDUS/45W/LS (Model Indus series) and Make : Havells ENDURACITYLINERNEXGENSL45WLED757SASYBOPC HSN Code 9405 or equivalent in makes indicated in Appendix 'B' of Particular Specifications complete all as specified and as directed by Engineer-in-charge. Note : Contractor shall provide 1 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion complete all as specified and as directed.

Supply and fixing PVC sheathed multistranded copper conductor cable , single core of size 2.5 sqmm fixed Junction box on pole MCB SP to security light fitting complete all as specified and as directed.

Material and labour for MS supports clamps, and Anti-climbing device; spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and as directed.

Material and labour for stove enamelled black rigid steel conduit of external dia 20 mm fixed on pole with clamps for protection of connecting cable from junction box to bracket of security light all as directed. (Clamps shall be measured and paid separately).

Supply and fabricate GI bracket made out of galvanised pipe light grade 40 mm bore 1.5 mtr length bend to shape for fixing street light fittings complete all as specified and as directed.

Supply and fix in replacement, control box for street/security light made of 3 mm thick MS Sheet (CRCA) comprising of MCB SP 230 V 06 Amps -01 No SP, bus bar of 50 Amps rating aluminium for phase and netural on porcelain based insulators with locking arrangement fixed to pole with MS clamp of size 20x3 mm, nuts, bolts and washers complete all as specified and as directed.

Supply and fix in replacement , Time light distribution board analog Time switch 230 volt three phase of 20 Amps rating with contactor fixed inside steel enclosure box and fixed to pole/LT Panel including clamps, nuts, bolts and washers etc complete all as specified and directed.Make Indo-Asian cat part No TL016ABO or equivalent in Legrand/Scheneider or equivalent in makes indicated in Appendix 'B' of Particular Specifications complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order. PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate. Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order.

Supply, fabricating, erecting LT Panel indoor type CPRI approved totally enclosed weather and vermin proof suitably ventilated 415 Volts, 50 cycles, AC supply, factory made fully compartmentalized made out of 2.00 mm thick CRCA sheet steel for load bearing and 2.00 mm thick for non-load bearing protection of enclosure IP 54 as per IS-2147 of 1962 with pretreatment and powder coated of approved colour including suitable size angle iron/flat iron frame work/ support, required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with & including following.

Supply, installation, testing & commissioning silent Generating Set with acoustic enclosure of capacity 62.50KVA diesel Engine driven 3 phase 415 Volt, alternator as per IS : 13364 complete all as specified & comprising of the following :-

Prime Mover : Suitable for driving 62.50KVA alternator, water cooled battery (electric start) diesel engine of suitable capacity BHP confirming latest IS and a fuel tank suitable for 12 hours consumption capacity mounted on MS frame for one hour in any 12 hrs operation taking into consideration de-rating due to altitude/temp & complete with following standard accessories :-

(a) Lubricating oil temperature gauge.

(b) Lubricating oil pressure gauge.

(c) Battery charging ammeter.

(d) Starting switch with key and cut out.

(xii) Lubricating oil pump. (xiii) Fuel filters. (xv) Hoses for fuel tank. (xvi) Vernier control system for speed regulation. (xvii) Air cleaner assembly. (xviii) Battery chargin alternator. (ixx) Spin - on dual fuel filter with wate seperator. (xx) Silencer (Hospital grade) (xxi) Shut - of coil. (xxii) First fill of lube oil and coolant. (xxiii) Safety for low tube oil pressure. (xxiv) Safety for high water temperature. (xxv) Permissible overlaod of 10 % for one hour in 12 hours of operation.

Alternator :50 KW capacity of 0.8 PF self excited, self regulated, 3 phase 50Hz 415 V 1500 RPM 4 wire alternator, output voltage regulated between + 0.5% or set voltage from no load to full load. Confirming to BS : 5000/IS 4722. Alternator is brushless type Screen protected IP 23 protection with insulation class H.

12 Volt 180 AH maintenance free initial charged batteries (make exide/amron/ standard furukawa)

Gen set Controller : Microprocessor based gen set monitoring and control system suitable for working in harse environment having following features, Functions, protections :- (i) 16 Character x 2 line alphanumeric LCD display with LED backlight. (ii) Operator interface. (iii) Provide a record of most recent fault conditios. Fault history stored in the control non volatile memory. (iv) Provide alternator DATA. (v) Voltage (1PH 3 Ph line and line to neutral voltage) (vi) Current (1PH or 3 Ph) (vii) KVA (3 Ph and total) (viii) Frequency (ix) Provide Engine data (x) Starting Battery voltage. (xi) Engine Temp.

Automatic starting of main failuer cubical panel for 62.5 KVA DG Set, fabricated out of sheet metal (factory fabricated) suitable for floor mounting hinged from panel for assembly accessibility with suitable rated bus bars, internal wiring with copper coductor and with provn for connecting incoming/outgoing leads including suitable ML contactors, it will have the following accessories :-

(iii) KWH Meter - 01 Nos

(iv) Frequency meter - 01 Nos

(v) Push button, start, stop, rest - 01 Nos

(vi) Master switch for manual/test/off - 01 set

(vii) Set of lamp for indicating load on - 01 set load' on mains set fails to start low oil pressure, high cylinder temperature.

(aa) Transformer of adequate rating

(ab) Rectifier

(ac) DC Ammeter

(ad) DC Voltmeter

(af) Indicating lamp for battery

(ag) One No 12V, 180 AH of initial charged battery.

(ix) Auto change over suitable for 100 KVA , AC 415 v Cotractors with relays & timers to be provided.

ARR CONSTRUCTIONS

J.K & Company

GULSHAN SINGH GHAI AND SON

UNITED ENGINEERING CORPORATION

KULDEEP SINGH

KAMAL AGGARWAL

M/S BALWINDER SINGH