PROVN OF 01 x TRG STORE AT 151 INF BN TA JAT 01 X SENTRY POST NEAR ARO ENTRANCE GATE DEFICIENT GEYSER 50 NOS OF CAPACITY 25/40 LTRS INCL NECESSARY FITTINGS IN OFFRS AND JCOS/OR GOVT MD ACCN FIRE ALARM AT NFS NODE AND 02 X SPLIT TYPE AIR CONDITIONER

Amount

Boring holes 5m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed..

M&L 40mm thick damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4, type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed..

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor, finishing cement concrete surface even & fair complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in Chajjas and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&L RCC type M-25 Design Mix using (20mm graded stone aggregate) as in cantilevers, bressmummers, lintels over 1.5 m span, seismic bands, beam etc complete all as specified and directed (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto all as per item No 23 but 6mm to 8mm dia.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M & L for Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for 5 mm thick rendering on fair faces of brick /concrete surfaces of ceiling / chajja in CM (1:3), finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L Preparing new plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

~Ditto~ all as per item No 31.00 above but on wall complete as specified and as directed.

M & L preparation of new steel surfaces any description, not otherwise descrived, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M & L preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm thick Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl Screed bed or bedding layer of Cement Mortar (1:6), 15 mm thick for laying of kota stone flooring finishes, necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. Note: (size of the stone slab not less than 23"x23")

M&L Machine cut Kota stone slab flooring 20-25mm thick as in skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete incl 10mm thick plaster in CM 1:6 complete all as specified and directed.

S & F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts ( each shutter having two tower bolts 100mm long ) complete (with glazing bars) dovetailed or welded complete all as specified and as directed.

~Ditto~ all as per item No 38.00 above but without glazing bars complete as specified and as directed.

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified.

S & F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

S & F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I all as specified and directed.

M & L PCC 1:2:4 type B1 (20mm graded stone aggregates) as in bed blocks for hold fasts including necessary form works complete all as specified and directed.

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed..

S & F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.

S & F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F Aluminium handles, cast type, anodized 150 mm size complete ISI Marked complete all as specified and directed.

S & F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long complete all as specified and directed.

Material and labour for cleaning surfaces and applying evenly a coat of hot blown bitumen grade 85/25 @ 1.20 Kg per Sqm over a coat of bituminous based primer @ 0.30 Kg per Sqm till the surface is properly impregnated. After the application of the bitumen, provide polymeric water proofing membrane of approved quality weighting not less than 3 Kg per Sqm with 100 mm over laping and bonded completely to the substrata and the over laps sealed / fused by flame or by bitumen as per manufacturers instruction. After the membrane is laid a layer of blown bitumen grade 85/25 @ 1.20 Kg / Sqm shall be applied and one coat of aluminium paint at the rate of 100 gram per sqm as per manufacturer instruction over bituminous layer complete as directed. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

M&L for screed bedding 10 mm thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab complete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately

M& L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof padding etc finished surface even and fair without using extra cement complete all as specified and directed

M&L for Chequered cement concrete tiles (pre painted coloured rubber moulded) 20 cm x 20 cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry in floors (with grey cement and pigments) including Screed bed or bedding of mortar (CM 1:4) 20 mm thick for laying floor finishes.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and directed.

All as per item no 54.00 above one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified and directed.

All as per item no 54.00 above one 5 Amps socket out let point on independent board controlled by one switch complete all as specified and directed.

All as per item No 54.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board and for earth 1.5 sqmm green PVC unsheathed multistranded copper conductor complete all as specified and directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 15 amps, 240 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 5 amps, 230 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 230 Volts complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 63.5mm dia three terminal, fixied complete all as specified and as directed.

Supply and fixing Lamp holder, insulated body with back plate suitable for batten/angular fittings fixed complete all as specified and as directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type including one tube rod 18/20 watt complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size with and including 01 No tube 18/20 watt all as specified. Make of Fitting- Havells, Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/Philips/Crompton. Make of tube: Havells Cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent of Bajaj / Philips / Wipro / CG.

Supply and fixing sheet metal enclosure for 8 way distribution board (DB's) double door, single pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB'S/Isolators complete all as specified and as directed Make : Schneider/ Legrand/ L&T / ABB.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge. Make : Schneider/ Legrand/ L&T / ABB.

Supply and fixing MCB SPN 5 to 40 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. Make : Schneider/ Legrand/ L&T / ABB.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 03 of MES schedule 2009 part-I and connected complete all as specified including testing on completion.

Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 10 Sqmm nominal cross section x 2 core complete all as specifed and as directed. Makes of cable : Gloster/Polycab/ Havells

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation etc. complete all as specified and directed. Note :- Thickness of sand shall be measured 18 cm thick after punning.

Supply and laying sub class bricks of size 25cmx 15cm x 7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M&L for 18 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

Supply and fix geyser Water heater storage type, electric,capacity 25 litres horizontal mounting all as specified and as directed.

Supply and fix geyser Water heater storage type, electric,capacity 25 litres vertical mounting all as specified and as directed.

Supply and Fix geyser water heater storage type, electric capacity 35/40 litres vertical mounting all as specified and directed.

S & F PVC connections 15 mm size with PTMT pipe with nuts of 450 mm length for hot and cold water supply complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supplying and laying of CPVC pipes 20 mm dia outer SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply and fixing of Tee for CPVC pipe 20 mm outer dia complete all as specified and as directed.

Supply and fixing of elbow for CPVC pipe 20 mm outer dia complete all as specified and as directed.

Supply and fix angular stop cock, brass chromium plated, screwed down for size 15 mm (1/2”) dia pipe including all connected fittings complete all as specified and as directed.

Supply and fix Cock, bib, brass chromium plated, screwed down For size 15 mm (1/2”) dia pipe including all necessary fittings complete all as specified and as directed.

M&L for point wiring with 4.0 qmm cable copper for 3 pin 15 Amps socket outlet on independent board,including 4.0 sqmm copper conductor PVC insulated sheathed continuous earth wire and connecting to common earth dolly FRLS sheathed 1100 Volts grade copper multi stranded conductor drawn through and including rigid PVC conduit 20 mm dia concealed in walls ,roofs, including chese cutting and making good of wall surface by using putty and wall paint complete all as specified and as directed.Note : 2 X 4.0 sqmm for phase and nutarl and 1 X 4.0 sqmm for earth run measured in one unit.

S & F Switch socket combination flush type 5A/16A, 5 in 1 flush type including all fitting and chese cutting and making good of wall surface complete all as specified and as directed.

Supply only of stored pressure fire extinguiser ISI marked powder type Fire Extinguisher 4 KG capacity suitable for Class "A", "B", "C" Fire consisting with discharge hose and nozzle of welded cylinder, squeeze lever discharge valve fitted with pressure indicating guage, internal discharge tube, discharge nozzle suspension bracket conforming to IS : 15683 :2006 (old IS : 2878) duly charged with ISI Marked Mono Ammoniumphosphate base ABC powder conforming to IS : 14609 and pressurized with Nitrogen Gas, suitable for operating between 30 degree centrigrade to + 55 degree centigrate, Fire Rating Class - 1A & 13B complete all as specified and as directed.

Supply and fix Fire alarm control panel complying with BS EN 54 2 loop panel with 99 detectors & 99 modules & upto 200 detectors and modules per loop complete all as specified and as directed.

Supply and fix Fire Alarm sounders / Sirens electronic type horizontal two stage continuous normal operation for at least 50 minutes with sound level 65 db to 120 db Measured at 1.5 m with sound output variation of + 5 db 500m range complete all as specified and as directed.

Supply and fix Addressable manual call point break glass type with alarm LED complete all as specified and as directed.

Supply and fix Detectors Complying with and type certified to EN-45 Addressable type smoke detector multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 including fixing accessories in false ceilling/ normal ceilling complete all as specified and as directed.

Supply , installtion, testing & commissioning of cable for fire detection (smoke detector) and alarm system (for call bell point/hooter) with 2 core annealed tinned copper conductor PVC sheathed,flexible, unarmoured 02 core cable 1.5 sqmm complete all as specified and as directed.

S & F of Rigid metallic conduit 25 mm bore exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc including red painting complte all as specified and as directed.

S & F of Cast Iron/ pressed steel terminal boxes 60 mm deep with 3mm thick plastic laminated sheet cover of size 100mm X 100 mm complete all as specified and as directed.

M&L for point wiring for 3 pin independent switch socket with 2.5 sqmm PVC insulated FRLS sheathed 1100 Volts grade copper multi stranded conductor drawn through and including PVC casing caping in walls ,roofs, etc including 2.5 sqmm PVC insulated copper conductor as earth continuity conductor and connecting it to the common earth dolly all as specified and as directed.

Supply , installation, split type air conditioner 1.5 TR capacity single phase inverter type, copper coil, BEE 5 star rating including all necessary arrangement such as drain pipe, hanging channel for outdoor unit and all necessary arrangement, complete all as specified and as directed.

Supply and installation of voltage stabilizer for automatic operation, single phase, copper wound naturally air cooled indoor type & designed for input variation beetween 130 Volts to 280 Volts, 12 Amps for one 1.5 TR AC with output voltage stabilized at 230 Volts with accuracy of + 2.5% complete all as specified. Make : Servo/Volina

S & F Single pole and nautral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A capacity complete all as specified and as directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable per point 1100V grade single core having multi stranded copper conductor for size 4.0 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall & 4.0 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding lugs excluding MS boxes for mounting switches, sockets etc for one socket point controlled by one switch complete all as specified and as directed. Make of cable : Polycab/Havell's/Finolex and Make of PVC conduit : Plaze/Harsh/Kalinga Premium/AKG.

PAPPU ROY CONSTRUCTION

G S CONSTRUCTION

RC GUPTA AND SONS

M/S MODERN CONSTRUCTION

HARINANDAN RAI SONS

MS CHAKRAVARTY PRITHIVI RAJ