REPAIR/MAINT AND CAMOUFLAGE PAINTING TO THE BUILDINGS AND PERIMETER WALL AT TECH AREA AT AF STN DIGARU.

Amount

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water but cement or cement lime plaster, etc complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, laid dry but built in cement mortar or cement lime mortar complete all as specified and as directed complete all as specified and as directed.

M&L Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick wall or concrete surfaces finished even & smooth without using extra cement.

M&L for preparation of new wall surfaces applying two coat of white wash complete all as specified.

M&L for 15mm thick rendering in CM (1:4) on other than fair faces of brickwork or concrete surfaces complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces applying two coat of acrylic smooth exterior paint of required shade(camouflage) applied @1.67 litre/10Sqm over and incl priming coat of exterior primer applied @2.20kg/10sqm complete all as per manufacturer instruction.

M&L for complete removal of extisting treatment and applying two coat of acrylic smooth exterior paint of required shade(camouflage) applied @1.67 litre/10Sqm over and incl priming coat of exterior primer applied @2.20kg/10sqm complete all as per manufacturer instruction.

M&L for old wall surfaces and applying one coat of acrylic smooth exterior paint of required shade(camouflage) applied @1.67 litre/10Sqm over and incl priming coat of exterior primer applied @2.20kg/10sqm complete all as per manufacturer instruction .

M&L preparation of old floor/hardstanding/paver blocks/chequired tile surfaces and applying two coats of floor paint over a self priming coat as per following specifications : (a) wash surface to a hose to remove loose dust and scrub with wire brush to remove algae/fungus and moss growth. (b) After diluting the emulsion with 30 to 40% water water,applying a self priming coat. (c) wait for 6 to 7 hours, then add two coats of floor coat emuision after thinning with water to obtain brushable consistency.

M&L Preparing of old steel or iron Surfaces one coat of synthetic enamel paint of any description, over 10cm in width or girth,not otherwise described complete all as specified and as directed.

M/s Capital Traders (BID ID -3068011)

TRADE CENTRE (BID ID -3068398)

Baruah Fabrication (BID ID -3066995)

M/s Ravi Enterprise (BID ID -3068353)

M/s DC Traders (BID ID -3067083)

Ms Sukumar Talukdar and Co. (BID ID -3068100)