CERTAIN REPAIR AND MAINT OF UG CABLE, LT OH LINE, SECURITY LIGHT, LT PANEL AND INTERNAL ELECTRIFICATION OF OTM AND MD ACCN OF SIGNAL RECORDS AND DEPOT REGT UNDER AGE E/M OF GE (EAST) JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surfaces of walls, floors, as per existing finishes etc complete all as specified.

Taking down carefully unserviceable/partly unserviceable light fittings any type, tube light fittings and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing adjacent to main switch board including making good to disturbed surfaces to match with existing surfaces

Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfaces to match with the existing surfaces

M&L for the following point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS), with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS) stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX /HAVELLS/POLYCAB & Make of PVC conduit & conduit accessories - FINOLEX/ KALINGA/JINDAL. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling

-ditto- all as per item No 5 above but One light point controlled by one way switch

-ditto- all as per item No 5 above but One ceiling /exhaust fan point controlled by one switch and regulator

-ditto- all as per item No 5 above but One 3 pin 5 amp socket out point on the same board with other switches.

-ditto- all as per item No 5 above but One 3 pin 5 amps socket out let point on independent board

-ditto- all as per item No 5 above but One bell/buzzer point controlled by one bell push.

-ditto- all as per item No 5 above but One light point controlled by two 2-way switches

-ditto- all as per item No 5 above but for one socket outlet 15 Amp on independent board with 2.5Sqmm (FRLS) cable and 1.5 Sqmm (FRLS) earth wire.

S&F Switch piano flush type single pole one way 5 ampsof ISI mark. Make : Havells/ Anchor/ Plaza

S&F Switch piano flush button type two ways 5 Amps of ISI mark. Make : Havells/ Anchor/ Plaza

S&F Socket out let 2 in one, 5/3 pin 5 Amp of ISI Mark. Make : Havells/ Anchor/ Plaza

S&F Switch socket combination 5 Amps 5 pin flush type duly ebbosed ISI mark of make Make : Havells/Anchor/Plaza

S&F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal. Make : Havells/Anchor/Plaza

S&F Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified Make : Havells/Anchor/Plaza

S&F Call bell AC-230 Volt single pole ding dong Make : Havells/Anchor/Plaza

S &F Bell push, flush type 5 Amps. Make : Havells/Anchor/Plaza

S&F regulator electronic step type 100/120 watt 5 step complete all as specified and directed Make : Havells/Anchor/Plaza

S&F Lamp holder insulated body with back plate for angle holder all as per specified Make : Havells/Anchor/Plaza

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack, 1x20 Watt, 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc.with all accessories internal prewired & including coneecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos. make- Havells Cat Pt No LHEXACP7IN1WO20, or Philips Cat Pt No TCW450 P 2XTLED 19 W P3397 or Crompton Cat pt No LTT8-20, or Bajaj Cat Pt No BCLSB 20 WH.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack,1x10 Watt, 2 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc.with all accessories internal prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos. make- Philips/Havells/Crompton/Bajaj

Supply and fix LED security light fitting of 30 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make Philips Cat Pt No BRP046 LED 30 CW MR S1 PSU GR, or Wipro Cat Pt No LR02-331-XXX-57-XX, or Crompton Cat Pt No LSTP-30-CDL, or Bajaj Cat Pt No EXNT P 36L WH CR PC SD.

S&F Surface mounting round, decorative LED down lighter 12 WATT and transulent defuser, prefixed with flat profile and mounting clamps etc., complete all as specified Make Phillips Cat Pt No SM250C LED12S- 6500 PSU WH,or Wipro Cat Pt No LD-141-XXX-65-XX*, or Havells Cat Pt No LHEJNP5CPZ1W012

S&F LED light fittings decorative 34/36 Watt surface mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed of Make Phillips Cat Pt No SM365C LED 32-65 PSU OD GR, or Wipro Cat Pt No CRCO10S036HP57G1 or Crompton Cat Pt No LCTLSN-36-CDL, or Havells Cat Pt No LHEWEBP7IL1W036.

S&F LED light fittings decorative 36/34 Watt recess mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed Make Philips Cat Pt No RC380B LED36S -6500 G4 L60 W60 PSU OD, or Crompton Cat Pt No LBRP40CL22CD or Wipto Cat Pt No. LM25-481-XXX-65-G1.

S&F in repairs GI pipe 'light grade' bracket 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mm MS flat & fixed with anchor bolt suitable for 30W security light fitting complete all as specified and directed

S&F in repairs earth enclosure with 2 pin earth plug socket complete with MCB SP 20/25 Amp, flush mounting type Make -Havells/ LEGRAND/L&T

Taking down ceiling Fan/Exhaust Fan of any size or make complete all as specified and directed

Hanging only ceiling fan of 1200mm/1400mm/1500mm during wiring Sweep by providing fan hooks in proper manner and making connection with 3 core copper cable including painting all as per specified and directed by Engr-in-Charge.

Fixing only Exhaust fan 230/250/300/380/450 sweep heavy duty including 3 core copper cable & cutting holes if required etc. complete all as specified.

S&F in repairs capacitor 2.5 mfd suitable for ceiling fan/exhaust fan complete all as specified.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces

S&F MCB DB made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 ways Double door, Make -L&T/LEGRAND/SCHNEIDER

S&F MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 4 ways Double door IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

S&F MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail ,230 Volts SPN with 8 ways Double door , IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

S&F MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 12 ways Double door IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

NOTE FOR ITEM Nos 36 to 39 -(i).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall/DB to be fixed on wall including frame made out of MS flat 40x5mm (ii).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface. (iii) MAKE OF DB & MCB L&T/LEGRAND/ SCHNEIDER

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 0.5 sq mm cond. const (NO./Dia mm) (16/0.20) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as site requirement and as directed by Engr-in-Charge. make- polycab/Havells/Finolex

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 0.75 sq mm cond. const (NO./Dia mm) (24/0.20) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as site requirement and as directed by Engr-in-Charge. make- polycab/Havells/Finolex

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 1 sq mm cond. const (NO./Dia mm) (32/0.20) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as site requirement and as directed by Engr-in-Charge. make- polycab/Havells/Finolex

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 1.5 sq mm cond. const (NO./Dia mm) (30/0.25) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as site requirement and as directed by Engr-in-Charge. make- polycab/Havells/Finolex

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 2.5 sq mm cond. const (NO./Dia mm) (50/0.25) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as site requirement and as directed by Engr-in-Charge. make- polycab/Havells/Finolex

M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm (FRLS), earth continuity conductor of size 2.5 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 2.5 sqmm & PVC conduit shall be measured as one unit.

M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm (FRLS), earth continuity conductor of size 4 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 4 sqmm & PVC conduit shall be measured as one unit.

M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 4 Single core of size 16 Sqmm (FRLS), earth continuity conductor of 2 Single core 10 Sqmm (FRLS) to be drawn through in and including on metallic PVC conduit medium grade 80 mm dia with fittings (ISI marked) on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i) FOUR wires of 16sqmm and TWO wire of 10 sqmm & PVC conduit shall be measured as one unit.

M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 4 Single core of size 10 Sqmm (FRLS), earth continuity conductor of size 2x6 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 50 mm dia with fittings (ISI marked) on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i) Four wires of 10sqmm and two wire of 6 sqmm & PVC conduit shall be measured as one unit. Note : For Item Nos 38 to 41, The makes of wire : FINOLEX/ POLYCAB/ HAVELLS and Makes of conduit : FINOLEX/ SUPREME/JINDAL

S&F in repairs MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified Make -L&T/LEGRAND/SCHNEIDER

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)

Refixing of servicable MCB any type or size

Taking down partly unservicable tube light fittings any type,and fixtures, etc, and Refixing the same after repair including making good the disturbed surface complete all as specified.

Supply & Fix in repairs latest version, energy saving LED bulb of 7 Watt make Phillips/Havells/bajaj.

Supply & Fix in repairs latest version, energy saving LED bulb of 9 Watt make Phillips/Havells/bajaj.

Supply & Fix in repairs latest version, energy saving LED bulb of 12 Watt make Phillips/Havells/bajaj.

Supply & Fix in repairs latest version, energy saving LED bulb of 15 Watt make Phillips/Havells/bajaj.

Supply & Fix in repairs LED tube rod retrofit type of 18/20 Watt energy efficient,eco freindly of make Crompton Cat Pt No LT5RT-18-CDLor Havells Cat Pt No LHLDEFXD5L8R020 or Philips Cat Pt No 20W865 T8 IND I-2100 lm, or Bajaj Cat Pt No BLRB 20W CW LED.

Supply & Fix in repairs LED Batten suitable for 18/20 Watt LED tube make of Crompton Cat pt No DMLN1LT8-16 or Havells Cat Pt No LHFXCEP1TNNW020 or Philips Cat Pt No BN021C LED20S PSU CW GR S2, Or Bajaj Cat Pt No BLRB-DB-118 I.

Supply & fix in repairs post of lantern fitting made out of black ABS plastic spigot & spun alluminium funnel shaped with clear acraylic cover suitable for 15/20 w led lamp fitting including lamp all as specified and directed. MAKE: HAVELLS/Philips/Crompton/Bajaj

Supply & Fix in repairs electronic ballast suitable for 1x36 watt tube light fitting make - CROMPTON- / BAJAJ /HAVELLS

Supply & Fix in repairs electronic ballast suitable for 1x28watt make - CROMPTON- / BAJAJ /HAVELLS

Supply & Fix in repairs copper ballast suitable for 1x36watt make - CROMPTON- / BAJAJ /HAVELLS

Supply & Fix in repairs electronic ballast suitable for 1x18watt make - CROMPTON- / BAJAJ /HAVELLS

Supply & Fix in repairs electronic ballast suitable for 1x36watt CFL fitting make - CROMPTON/ BAJAJ /HAVELLS

Supply & Fix in repairs electronic ballast suitable for 1x11watt CFL fitting make - CROMPTON/ BAJAJ /HAVELLS

Supply & Fix in repairs bipin holder suitable for 28/36 watt tube light fitting CROMPTON- / BAJAJ /HAVELLS

Supply & Fix in repairs starter holder suitable for 40/36 watt tube light fitting CROMPTON- / BAJAJ /HAVELLS

Supply & Fix in repairs starter suitable for 40/20 watt tube light fitting CROMPTON- / BAJAJ /HAVELLS

S&F in repairs PVC rectangular block of size 100 x100 x50mm for mounting switches, sockets/fan Reg, etc with 3mm thick plastic laminated sheet cover. Make : Anchor/Press fit/Havells/C&S

S&F in repairs PVC rectangular block of size 175 x100 x50mm for mounting switches, sockets/fan Reg, etc with 3mm thick plastic laminated sheet cover Make : Anchor/Press fit/Havells/C&S

S&F in repairs PVC rectangular block of size 200 x150 x50mm for mounting switches, sockets/fan Reg, etc with 3mm thick plastic laminated sheet cover. Make : Anchor/Press fit/Havells/C&S

S&F in repairs PVC rectangular block of size 250 x200 x50mm for mounting switches, sockets/fan Regulator etc with 3mm thick plastic laminated sheet cover. Make : Anchor/Press fit/Havells/C&S

S&F in repairs PVC rectangular block of size 350 x300 x50mm for mounting switches, sockets/fan Reg, etc with 3mm thick plastic laminated sheet cover. Make : Anchor/Press fit/Havells/C&S

S&F in repairs modular switch piano flush type single pole one way 5 amps. Make : Anchor/ Havells/ Leader/ HPL

S&F in repairs Modular socket out let 2 in one, 5/3 pin 5 Amp. Make : Anchor/ Havells/ Leader/ HPL

S & F in repairs modular switch socket combination 6 pin, 3 module 5/15 Amps flush type universal. Make : Anchor/ Havells/ Leader

S&F in repairs modular bell push, flush type 6 Amps. Make : Anchor/ Havells/ Leader

S & F in repairs modular electronic regulator 100/120 watt step type. Make : Anchor/ Havells/ Leader/ HPL

S&F MCCB DB vertical type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 ways Double door , MAKE - L&T/LEGRAND/Havells

Taking down and dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spareparts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400/1500mm sweep fan :- (i) Split pin - 02 Nos (ii) Connection block - 1 No (iii) Insulation rubber bush. - 01 No

Fixing or hanging only ceiling fan after winding fan under item No. 84 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed

All as per item No. 84 here-in-above but exhaust fan of size 225mm to 450mm sweep (except rubber roll, split pin)

Fixing only Exhaust fan after winding fan under item No. 86 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed

All as per item No.84 here-in-above but air circulater fan of size 600 mm to 750mm sweep (except rubber roll, split pin)

Fixing only air circulater fan after winding fan under item No. 88 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed

All as per item No. 84 here-in-above but wall fan of size 300 to 400 mm sweep (except rubber roll, split pin)

Fixing only wall fan after winding fan under item No. 90 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed

Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down.(Note- (A) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (B) The spares required shall be measured and paid separately in the relevant items).

Taking down exhaust fan, of any size and type & cleaning/servicing and overhauling the same, refixing the same on its existing position and connection up.

Supply, fixing and connecting up flexible copper wire twin core of 23/.0078.

Supply only gun metal bush of any size (Make - MSP).

Supply only bearing for ceiling fan (Make - TATA/SKF No.6201/6202).

Supply only bearing for ceiling fan (Make - TATA/SKF No.6203/6204).

Supply only fan condensor 4 MFD (Make – USHA / UNIVERSAL).

Supply only split pin.

S&F canopy of ceiling fan bottom and upper side of size 1200/1400/1500mm Make :- Usha / Orient / Bajaj/Havells

Painting of ceiling fan 1200/1400 mm sweep complete including fan blade down rod with synthetic enamelled paint of white tint including cleaning and removing dust and dirt and making smooth surface for painting including writing MES No complete all as specified.

Supply & fix fan blade made out of aluminium alloy suitable for wall mounting fan of sizx 300 to 450 mm

Supply & fix GI tubing light grade 40 mm dia use as down rod of ceiling fan ,cut to required length & incl. drilling of hole at both side

Supply & fix GI tubing light grade 20 mm dia use as down rod of ceiling fan ,cut to required length & incl. drilling of hole at both side

Supply & fix GI tubing light grade 15 mm dia use as down rod of ceiling fan ,cut to required length & incl. drilling of hole at both side

S & F in repairs Mild steel work in framed work such as Fan hooks, Clamps, gratings, ladders etc., with ends of bars welded and/ or riveted, or forged and similar work confirming to Fe 410 - O or Fe 310 - O and incl painting to surfaces using two coats of metallic primer and a coat of synthetic enamelled paint of desired colour as directed.

Taking down MCCB any type & any size

S&F MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Schneider/L&T

S&F MCCB 100 A 25 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Schneider/L&T

S&F MCCB 160 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Schneider/L&T

S&F in repairs infra red light sensor (Ceiling mounted) with adjustable dusk to down setting to sense motion and direct wheather human has moved in or out of the sensor range time delay control min 10 sec plus minus 5 sec, max plus minus 2 min adjustable, light label control 5 lux to 2000 lux, rated load 1100 watt (incandscent), 550 watt halogen or 250 watt LED complete with testing complete all as directed by Engr-in-Charge.Make Vinay, Luker, Phillips, Bajaj.

Taking down and refixing water storage type electric geyser of capacity 25/50 Ltrs 230 volts 50 Hz single phase and installed complete with proper fixing arrangement nut bolts & washers properly after repair work complete all as specified and directed.

S&F in repairs water storage tank of Geyser Vertical type capacity 25 Ltr made of stainless steel complete all as specified.

S&F in repairs water storage tank of Geyser Horizontal type capacity 25 Ltr made of stainless steel complete all as specified.

S&F in repairs glass wool of any colour complete all as specified.

S&F in repairs heating element of 1500 watt triangular type for geyser complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs heating element of 1500 watt circular type for geyser complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs heating element of 2000 watt for geyser trangular type complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs heating element of 2000 watt for Solar System complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs thermostate for geyser complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs neon lamp yellow/red for geyser complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs air release valve for geyser complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs PVC connection armoured type both side brass union type nuts 45/60 cm length as specified and directed

S&F in repairs anchor bolts 75mm long made out of stainless steel complete all as specified and directed

S&F in repairs PVC insulated 3 core 2.5sqmm multistranded COPPER conductor for connection of Geyser complete all as specified and directed.

S&F in repairs geyser assembly suitable for 25 Ltr capacity complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs geyser assembly suitable for 50 Ltr capacity complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs Metal plug top 10 Amp, 3 Pin phase neutral and earth complete all as specified Make : Bajaj/ Toshiba/ Havells

S&F in repairs Metal socket top 10 Amp, 3 Pin phase neutral and earth complete all as specified Make : Bajaj/ Toshiba/ Havells

Dismantling carefully the existing U/S LT Overhead line ACSR conductor of any size from its position by necessary disconnecting of conductor complete all as specified and directed by Engr-in-Charge.

Supply and stringing, stretching and fixing ACSR conductor for over head line securing on pole complete including binding wire ,jointing sleeves aluminium tap and PG clamp etc of any size all as specified and as directed.

Fixing only/stringing only old dismantled ACSR conductor for over head line securing on pole complete including binding wire, etc of any size complete all as specified and as directed.

Note for item 122 & 123 Jumper on cut point/2 pole structure/4 pole structure shall be provided with PVC insulated sleeves. Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.

Removing /opening of binding from shackle/pin insulator and restringing of single conductor, tightening of LT over head ACSR /copper conductor any size including binding with copper /aluminium binding wire to over head conductor including renewal of jumpers complete all as specified Note:- Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.

Dismantling existing u/s guard wire with cradles of any size from LT OH line and removing from site of work complete all as directed by Engr-in-Charge.

S&F GI steel continuous earth wire & cradle 4mm dia on cross arms of poles for guarding including binding with aluminum wire 16 SWG etc. complete all as specified and directed by Engr-in-Charge.

Dismantling of U/S insulators of any size and type complete from its position and removing all as directed by Engr-in-Charge.

Fixing only old LT pin type insulator obtained from item No 133 above.

Fixing only old LT shackle type insulator obtained from item No. 133 above

S&F pin type, porcelain virteous, white, brown or green insulator 100mm height, 65mm dia for 1100 Volts grade, including one GI MS spindle, two GI washers, one GI nut complete all as specified and directed by Engr-in-charge.

S&F LT shackle type, porcelain virteous White, Brown or Green insulator 90mm dia, 75mm height, including GI MS straps of Size 31 x 3 mm washers, 12mm dia, bolts suitable for 1100 volts grade complete all as specified and directed.

Dismantling of u/s stay assembly carefully including stay wire necessary excavation and earth work in any type of soil, demolition of PCC of any type and removing rubbish to as distance n. exc 50m at low lying area complete all as specified.

S&F stay assembly complete with accessories and stay rod 16mm dia and 180 cm long, including ms galvanized stay plate 300 mm x300 mmx6mm and galvanized thimble complete all as specified and shown in electrical plate No 1. of SSR 2009 ( Part-I ) Note:- (loop type insulator, stays clamps, excavation and earth work and concrete shall be measured and paid separately)

S&F loop type insulator porcelain virteous, White, Brown or Green & with over all dimension 65 x 90 mm, clearance of hole. 16mm vitreous,porcelain, white, brown or green complete all as specified and directed including removing of existing unserviceable from its position.

S&F in repairs galvanized steel wire stranded of size 7/2.24mm including necessary binding strengthening complete all as specified and directed.

Dismantling of u/s existing cross arms by means made from channels, angles, U/S FI clamps, nuts, bolts etc. from OH line complete all as specified and directed.

M&L Cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts ,bolts, in any shape or size as indicated or directed and including two coats of aluminium paint over a coat of red oxide complete all as specified.

-Ditto- all as sper item No 137 above but fixing old existing cross arms received against item No 16 above including cleaning, removing stain and including preparation of old steel surfaces applying two coats of aluminum paint over and including a coat of Red oxide (primer) all as directed by Engr. in charge.

Dismantling of existing u/s steel LT poles of any size & type from its position carefully and removing from the site and including necessary excavation and earth work in any soil/strata, demolition of concrete, disconnection of conductor from pole etc. complete all as directed.

Supply and install steel, tubular swaged poles complete with cast iron base plate, finial taper plug nuts and taper plug , bolts, nuts and screws as specified type 410-SP- 31 (9.0 m long) complete all as specified and directed. Note : Excavation, earth work shall be measured and paid separately.

Dismantling/taking down steel tubular/pcc pole of any size including insulater & cross arm& stay wire & refixing at new location directed by engr-in -charge. Note :- Excavation, earth work & PCC shall be measured & paid separately.

Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and n. exc 1.50 mtr deep, n. exc 10 Sqm on plan and getting out complete all as sp[ecified and directed.

-Ditto- all as per item No 142 above but depth exc 1.5 mtr and n. exc 3.00 mtr deep and getting out.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation of poles etc complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for stays,foundation and platform for transformer installation complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate for coping of pole with and including formwork complete all as specified and directed.

S&F in repairs 1100 Volts grade line composite phase separators, moulded & bolted type as per IS 1445 - 1997 suitable for the following :-

Taking down u/s LT U/G cable (including all mounting accessories, bricks and sand etc ) from trenches, wall, floor etc and removing to store for safe custody upto 25 sqmm complete all as specified and directed. Note:- Excavation for taking out cable will not paid for separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.

Taking down u/s U/G cable (including all mounting accessories, bricks & sand etc) from trenches, wall, floor etc and removing to store for safe custody above 35 upto 120 Sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.

Taking down u/s LT U/G cable from trenches, wall, floor etc and removing to store for safe custody above 120 to 150 sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excavated for laying of cables

S&F XLPE insulated armoured and PVC sheathed "heavy duty" electric cable with aluminium conductor 1100 volts grade laid in trenches, passing through pipes /ducts including testing complete of following cross sectional area of the following sizes :- Note:- Rate is inclusive of cable gland & cable lugs. The contractor shall be used old cable route indicator retrietive from item No 150 to 152 above. Fixing cost for the same shall be included in the quoted rates of these items. Make : Havells/Universal/Poly Cab/Finolex

2 core, 4 sqmm cross sectional area

2 core, 6 sqmm cross sectional area

2 core, 10 sqmm cross sectional area

4 core, 16 sqmm cross sectional area

3-1/2 core, 25 sqmm cross section area

3-1/2 core, 35 sqmm cross section area

3 -1/2 core, 50 sqmm cross sectional area

3 -1/2 core, 70 sqmm cross sectional area

3 -1/2 core, 95 sqmm cross sectional area

3 -1/2 core, 120 sqmm cross sectional area

3 -1/2 core, 150 sqmm cross sectional area

S&F in repairs 40mm bore, GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed Make :- JINDAL/ ZENITH/ TATA

S&F in repairs 50mm bore GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA

S&F in repairs 80mm bore GI seel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA

S&F in repairs RCC hume pipe for road crossing of cables class NP-2 of size 100 mm dia complete all as specified.

Cutting of hardstanding/ Road for laying of pipe line/cable and making good surfaces after lying of pipe line/ cable upto 30cm in depth as per existing specification complete all as specified and directed.

M&L for boring of hole under road/hard standing by trenchless technology including S & F HDPE pipe "heavy duty " of size 100mm bore fixed in repairs complete all as specified and directed.

M&L unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Measurement shall be done after puning down of sand.

M&L Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` old size bricks laid dry and flat complete all as specified and as directed.

Relaying old dismantaled Bricks covering with width equal to length of bricks as mechanical protection to cable complete all as specified and as directed.

Taking down of faulty LT UG cable of size upto 400 Sqmm from trenches /pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete. Note:- Excavation/earth work and cable jointing & jointing kit shall be measured and paid separately under relevent item of schedule.

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 10 Sqmm 4 core to 16 Sqmm 4 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 25 sqmm 3.5 core to 50 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 70/ 95 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/ Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size120 sqmm 3.5 core cable size to150 sq mm 3.5 core complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

Taking down partly unserviceable/unserviceable security/street/gate/flood light fittings from poles/towers/Perimeter Fencing of any type upto 9 m height by manual or mechanical means and for necessary repair and make srviceable as per complaint given by department (E/M service cell) through job card/complaint register on day to day basis all to the satisfaction of Engr in charge & complete all as specified and directed Note :- Ballast, Lamp holder, capacitor, ignitor, covers and lamps of required wattage/type shall be measured and paid separately.

Fixing only repaired serviceable fitting of any size, and any make complete all specified and directed by engr-in-charge

S&F in repairs Electronic driver suitable for LED fitting 25 watt Make : bajaj/Wipro/Havells/ Crompton

S&F in repairs Electronic driver suitable for LED fitting 45 watt Make : bajaj/Wipro/Havells/ Crompton

S&F in repairs Electronic driver suitable for LED fitting 60 watt Make :Bajaj/Havells/Philips/Crompton

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-40 base Make:Bajaj/Havells/Philips/Crompton

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-27 base Make:Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 40/45 watt type Retro fit E-22 base Make: Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 30/35 watt type Retro fit E-22 base Make: Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 20/25 watt type Retro fit E-22 base type Make: Bajaj/Havells/Philips/Crompton

Taking Down of street light Bracket including clamps of any type/any size from to pole/wall including necessary nut & bolts as directed complete all as specified and directed.

S&F GI pipe bracket made of light Grade tubing of size 40 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed

S&F GI pipe bracket made of light Grade tubing of size 32 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed

M&L for Preparation for surface of existing steel poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality of aluminum paint all as directed by Engr in charge.

S&F LED street light lumanaries of size 90 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED street light lumanaries of size 72 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make : Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED street light lumanaries of size 60 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED street light lumanaries of size 45 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED street light lumanaries of size 25 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F in repairs post of lantern fitting made out of black ABS plastic spigot & spun alluminium funnel shaped with clear acraylic cover suitable for 1x20w LED lamp including fitting complete all as specified. Make : Bajaj/Havells/Philips/Crompton/ Wipro

S&F in repairs sheet metal box of size 60cmx60cmx20 cm for fixing street light timer switch , frame pole mounted type fabricated out of 1.6 MM sheet steel including powder coat painting over a coat of red oxide primer including ,consisting of the following :- (a) MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&T cat no- CM97919OOH2OG /Legrand cat no-420013/schneider cat no-LV510315 - 2 nos (b) Astronomical, Multifunctional digital time swithces cat no 004767 of legrand or equivalent of L & T cat no- T2 DD T7/MDS/GIC - 1 no. (c )Power contactor ML-4 , 3 pole rating not less than 70 A with 230 coil make L&T/SEIMENS - 1 no. (d) Internal wiring and, clamp - 02 no.made out of 40x5mm flat & angle 40x40x5mm -0.90m long -2Nos. (e ) MCB SP 6 amps-1 No

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)

S&F in repairs PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper. Make of Box- SPELS BERG/ SINTEX/ HENSEL

S&F in repairs PVC insulated 3 core 2.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/havells/CCI/Polycab

S&F in repairs PVC insulated 3 core 1.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/havells/CCI/Polycab

S&F in repairs Astrorex D-22, Multifunctional digital time swithces Make : Legrand/L & T/ MDS/ GIC

S&F in repairs galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval complete all as specified and as directed.

S&F MCCB 630 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Schneider/L&T

S&F MCCB 400 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Schneider/L&T

S&F MCCB 250 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make :Legrand/Schneider/L&T

S&F MCCB 200 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Schneider/L&T

S&F MCCB 125 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Schneider/L&T

S&F in repairs enclosure SUITABLE FOR MCCB TP complete all as specified Make : Legrand/ Schneider/L&T

S&F ON LOAD change over switch 4 pole 400amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 315amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 200amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 160amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 125amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 63 amps with sheet metal enclosure, Make : L&T schneider/Legrand

Taking down change over switch any type & any size

M&L for Preparation for surface of existing PCC poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality Exterior grade apex paint all as directed by Engr in charge.

S&F LED street light lumanaries of size 100 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED street light lumanaries of size 120 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED street light lumanaries of size 150 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED flood light lumanaries of size 150 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED flood light lumanaries of size 180 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

S&F LED flood light lumanaries of size 200 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton/ Wipro

Schedule of credit amount of Rs.1,79,672.00 to be deducted during AOC

Goodluck Enterprises

shri krishna traders

Skyline Encon

M/S CHETAN PRAKASH GOYAL

M/s Ajayshwar Singh Rana

a k builders

ELCON

Bidder Name

M/s Ajayshwar Singh Rana