Renovation of Main Building Ground and First Floor, Barrack and Boundary Wall in the Campus of Chief Justice Residence at Kanke Road, Ranchi

Amount

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing chequred precast concrete tiles 22mm thick in footpath coutyard jamted with cement slurry mined with pigment to match to shade of tiles including rubbing and cleaning etc complete 20mm thick bed of cement mortar(1:4): Light shade pigment using white cement

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below.

1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos

2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs

3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.

4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for platforms, vanity counters windows sills, facials etc of required size shade colour, texture over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels. Granite any colour,area of slab over 0.50sqmm

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & manufacturer in all colours and shades in skirting,riser of steps ,laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477 in average 6mm thickness including grouting of joints (Payment for grouting of joints to be made separeately)including all complete.(size 600x1200mm)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Coupler 110mm dia

shoe(plain)

110mm dia

Providing and fixing on wall face unplasticised PVC pipe clips moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

110mm dia

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: old work (two or more coats applied @ 1.67ltr/10sqmm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and fixig Bamboo jaffery/fencing consistging of suupertor quality 25mm dia (average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50x25mm,fixed with nalls and G.I.wire on existing ksupport commplete as per direction of E/I.

Finishing with Epoxy paint ( two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat,preparation of surface etc.complete job.(on concrete work)

Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete 250x10mm

ProvProviding and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm)

Providing and fixing 19mm commercial ply thick as per drawing for plain lining/cladding with necessary screws,including priming coat on unexposed surface all complete job.

Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick

Providing and fiaxing magnetic catcher of approved quality in cuupboard/ward robe shutters,including fixing with necessary screws etc complete job. Triple strip vertical type.

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc complete as per direction of E/I.(200 mm)

Providing and fixing stainless steel soft closing spring hinges at k0 degree hinges(hydraulic type) of approved make/brand to cupboarad shutters with full threaded steel screws including making necessaryk recess in board and finished etc.complete as per direction of E/I.

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc complete . Size 65mm

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500mm long with screews etc.complete as peer direction of E/I.

Providing and fixing ready made 304 grade stainless steel modular kitchen basket and accessories such as right angle basket(plain cuup & saucer,plant,partition,Bottle rack,Thali cutlery) kitchen utaensil basket,Dinner set basket,kitchen grain basket,Multipurpose basket as per site rrequirement including finishing(wherever required) and fittings the same shall be fixed with necessary stainless steel nuts & bolts,stainless steel screws&telescopic channel etc.as epr direction of E/I(for payment purpose only weight of stainless steel basket shall be considered exxcluding weight of all fixing accessoreis such as nuts,bolts,fasteners telecopic basket channels etc.payment of providing and fixing telescopic channel shall be paid separately

Providing and fixing stainless steel A ISI 304(18/8) kitchn sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets ,cutting and making good the walls wherever required(610x510mm bowl depth 200mm)

Providing and fixig P.V.C.waste pipe for sing or wash basin including P.V.C.waste fitting Flexibe pipe 40mm dia including all complete job.

Providing two coats of oil bound distemper of approved shade and make over old surface including washing cleaning and papering the walls, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required.

Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l .

A) BRASS STOP COCK

(b) 20 mm dia

Providing and fixing N.P/C.P brass/P.V.C porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/l

(b) 125 mm dia.C.P. SHOWER

Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l

(a) 15 mm dia wt not less than 300 gms

(a) 20mm dia wt not less than 400 gms

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l

(b) 250 mm thick wall.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

(a) Glass shelf with C.P brass rail

1) 600x125 mm glass shelf complete

(b) Mirrors of 6mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror

(1)600x450 mm size

( c) C.P brass towel rail 20 mm x 600 mm with bracket container

(2) C.P brass shop dish container medium quality with screw and hinges etc.

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Exposed on wall)

20mm nominal outer dia pipes

25mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

15mm nominal outer dia pipes

20mm dianominal outer dia pipes

Providing and fixing PTMT Grating of approved quality and colour

C.P.Grating.

circular type 125mm dia

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying factory made coloured chamfered edge CementConcrete paver blocks of required strength, thickness & size/shape, madeby table vibratory method using PU mould, laid in required colour & patternover 50mm thick compacted bed of fine sand, compacting and properembedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints withjamuna sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand in footpath, parks, lawns, drive ways orlight traffic parking etc. complete as per manufacturer’s specifications &direction of Engineerin-Charge. 80mm thick C.C. paver block of M-30grade with approved colour, design & pattern.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

Brick lead 8K.M(1K+7P)

sand lead 8K.M.

chips lead 22K.M.

Stone Metal 20 km lead

local sand lead 3K.M

Providing and fixing wall paper Providing it :5116877-85857375854 including all complete job as per direction of E/I.

Providing and supplying of KANENT wood chair Already Assembled Kanent (RM 53) product Id:5116877-63925708425,length:450 centimeter,width:450 centimeter,Height: 850 centimeter,chair Festuress:carving,Furniture Assembly: Already Assembled includig all complete job.as per direction of E/I.

Providing and supplying of Star Homz 75cmx45cm Decorative coir Mats,star Homz(Decorative Mat (50) 75cxm45cm),Product Id: 5116877-15373102496,Designation: BC2 ,Mass: 5400 gm per sq mtr for BC2 pile height: 25mm for BC2,colour and design of mats: stenclled,length x width(cmxcm):75cmx45cm including all complete job as per direction of E/I.

Providing and fixing of Unbranded chair mat cushion(gram)10 mass of ffiller(gram)10 Density in case of PU Foam (Kg/cubic meter)30 Average thickness 1 length(mm)550 width 460 including all complete job as per direction of E/I.

Providing sohrai painting including all complete job as per direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

M/S MANOJ KUMAR PANDEY