PAINTING, MARKING, PERIODICAL SERVICES, REPAIR TO ROOF OF HANGERS OF ARMY AVN SQN, STONE PITCHING AND MISC B/R RELATED WORKS UNDER GE NASIK ROAD.

Amount

Taking down cement plaster of any description on brick or stone walls and ceiling including raking out joints, hacking for keys, scubbing down with water etc and complete all specified and as directed.

M&L for rendering 12mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 5mm thick in CM (1:3) on fair faces of concrete surfaces, finished even and smooth wihout using extra cement on ceilings compleete all specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by the Engineer-in-charge

M&L for preparing of newly plastered surfaces of ceilingss and applying three coats of white wash complete all as specified and directed by the Engineer-in-charge

M&L for preparing the newly plastered surface by rubbing, washing down with water and applying two coats of exterior emulsion paint(Asian) with one coat of coloured primer as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required.

M&L for One coat of exetior emulsion paint (apex/weathercoat) on walls and ceiling plastered or unplastered surfaces including preparing by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, removing nails, making good holes, cracks by filling with putty and necessary scaffolding and other safety arrangement to work at any height at site if required as directed by Engr-in-Charge.

M&L for Two coat of exetior emulsion paint (apex/weathercoat) on walls and ceiling plastered or unplastered surfaces including preparing by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; removing nails, making good holes, cracks by filling with putty and other safety arrangement to work at any height at site if required as directed by Engr-in-Charge.

M&L for Two coats of distemper oil emulsion white or tinted on walls over a coat of primer, including preperation of surfaces by washing, rubbing down, stopping and complete removal of old distempered surface etc.

M&L for 3mm thick wall care putty on wall.

M&L for One coat of distemper oil emulsion white or tinted on walls over a coat of primer, including preperation of surfaces by washing, rubbing down , stopping oand complete removal of old distempered surface etc.

M&L for One coat of distemper oil emulsion white or tinted on ceilings over a coat of primer, including preperation of surfaces by washing, rubbing down and stoppingand complete removal of old distempered surface etc.

M&L for One coat of synthetic enamel paint on old painted steel or iron surfaces of any description over 10cm width or girth including preparation of surface.

M&L for One coat of synthetic enamel paint on old painted steel or iron surfaces of any description not exc. 10cm width or girth including preparation of surface.

M&L for painting lines,dashes, arrow letters etc on road pavement, parade ground n.exc 10cm width and applying 2mm thick road marking strips (reflective ) of specified shade/colour using hot thermoplastic material by fully/semi automatic application machine fitted with profile stone heater driven by experienced operator on road surfaces including preparation of previously treated surfaces, cleaning surfaces of all dust, scales oils grease and foreign materials etc complete all as specified and directed.

Taking down carefully (copper/aluminium) point wiring in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall as per specifications and drawing

Dismantling Pre-painted galvalume aluminum, CGI corrugated and plain sheets in wall cladding or roof coverings including ridges and make good of aluminium earthing strips after fixing of sheets (Height up to 10.00m any location) complete all as specified and directed.

Refixing of old any thickness prepainted galvalume aluminium, CGI corrugated sheet fixed with coach screws and washers, in roof, after repair of roof (height up to 10.00mm any location) etc. complete all as directed.

Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws (height up to 10.00mm any location) complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall,ridges fixed with self tapping screws as specified

S&F for in repair 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 (height up to 10.00mm any location) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, vally gutters and wind tie for ridge including bolts, bending, welding, reveting to supporting if required: hooks (stay), heavy, similar small articles conforming to Fe-290 Gde-E-165

M&L for preparing new steel surfaces of any description over 10 cm in width or girth and applying two coats sythetic enamel paint of with one coat of 'H' primer in four or more shades as directed by Engr-in-charge inclnecessary scaffolding and other safety arrangement to work at any height at site if required.

Dismantling PVC (SWR) pipe any size and in any position complete all as directed by Engr-in-Charge.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 110mm PVC (SWR) bends any radius

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal

Excavation in post holes (or similar holes) each in not exc 0.5 cum getting out and removing surplus soil to a distance in exc 50 mm and making good surface in soft/loose soil complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410-W (Gde E-250) Quality -A all as specified and directed.

S&F steel work as in tabular trusses/supproting pipes etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment

M&L for pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregates as in cover slab/MH cover complete all as specified and directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.

Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for works with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6.

M&L for PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling complete.

M&L for PCC 1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

M&L for boulder pitching laid dry, hand packed tightly and pitching is grouted with cement and sand mortar 1:6 all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level)

M&L for100 mm thick Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered andrammed to a true surface complete all as specified and as directed by Eng-in-charge.

M&L for 50 mm thick PCC 1:3:6 Type C-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed.

M&L for 100mm thick nominal mix concrete type A-1, M-20 (20mm graded aggregate) laying in floor with screed vibrator including finishing cement concrete surface even and smooth with brooming of top concrete surface complete all as specified and as directed.

NOTE: - AMOUNT OF SCHEDULE OF CREDIT RS. 1,30,313.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Sky Vision Construction

Abhiraj Enterprises

Alpha Construction

Bidder Name

M/S SAMEER SUBHASH PATANI

Alpha Construction

Abhiraj Enterprises

Sky Vision Construction