Playground Development at Ilya Street, RK Nagar

Amount

Clearing scrub Jungle and Surface dressing of the ground. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls . Brick / Stone Masonry in cement mortar walls under 3m high

Dismantling RCC by manual / by using deploying machineries

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 10 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Providing PILES 600mm dia cast-in-situ with single reamed (bulb) in cement concrete 1:1.:2, 11.5cm above G.L. including boring, erecting, vibrating,curing, hire charges for drilling equipments, etc.,complete as per relevent ISI specifications(excluding cost steel reinforcement).

Providing UNDER REAMED PILES R.C.C.38 cm (15") dia cast-in-situ with single reamed (bulb) in cement concrete 1:1.:2, 11.5cm above G.L. including boring, erecting, vibrating,curing, hire charges for drilling equipments, etc.,complete as per relevent ISI specifications(excluding cost steel reinforcement).

Supply Conducting Pile integrity tests (PIT) on the piles under each cluster by using a 6 Ibs nylon tipped hand held hammer, glueing sensitive accelerometer on top of the pile by petro wax or petroleum jelly afler making the pile head smooth and even by dise grinder, providing stage wise and final report along with relevant conclusions ete., as directed by Client / Engineer-in-charge. as per latest IS-2911.

Carrying out initial Working pile load test on specified dia piles as specified in IS:2911 (Part 4). Includes all plant, equipment, machinery. instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete.

Carrying out Dynamic Load Test on specified dia piles as specified in IS:2911 (Part 4). Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc. dismantling and carting away entire setup, excavation and dewatering etc., ali complete.

Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 2m and clearing and leveling the site etc. complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Laying the Plain Cement concrete 1:4:8 (One cement four sand and eight broken Machine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

For Plane surface such as vertical slab ,slide slab of boxing, vertical drops, facia, vertical wall, etc.

Column And Sunshade

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

For Foundation and Basement for 1.0 Cum

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

STRUCTURAL STEEL WORKS: Supplying fabricating, hoisting, erecting and fixing in position Mild steel structural steel works of Pergola, Gate for compound wall and grill at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS plates, flats, squares etc., of various sizes and other structural steel sections confirming to latest IS2062 Grade - A&B including straightening, cutting, welding, bending to shape, bolting and inclusive of the following finishes. The rate including cost of all materials, labour charges, scafolding, stagging, transportation, lead & Lifts, wastage, etc., complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. All MS members shall be painted with one coat of zinc chromite primer and 2 Coats of 35 microns DFT of synthetic enamel paint of approved colour and make etc,.The rate includes the cost of all materials,labour,tools,tackle and plants, wastage etc.,as per specification and drawings complete. The rate quoted is to include cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for. The rate to include preparation of fabrication shop drawings for owner's approval:

Fly ash Masonry work

Flyash Brick Masonry in cement mortar 1:5 (One cement and five M- sand) in foundations, basement and superstructure walls using Flyash Brick of size 230x110x75mm etc., complete complying with standard specifications and drawings and as directed by departmental Engineers

Flyash brick partition wall in CM 1:3 (One of cement and three of M-sand) 11.50CM thickness using Flyash brick of size 230x110x75mm including both side plastering with CM 1:5 12mm thick and using hoop iron with reinforcement if found necessary. The loop iron shall be should be supplied by department at free of cost.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails.

Plastering

Plastering with cement mortar 1:3 (one cement and three P-sand) 12mm thick with P- sand flooring including curing, neat finishing, etc., complete complying with standard specification and as directed by the Departmental officers.

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Special ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshades, canopies, staircase, steps, landing slabs etc., with CM 1:3 according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supplying and painting of 2 coats plastic emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:1.5:3 (One cement, Two M - sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification.

Providing and fixing Granite Slabs (rough ganite Polished with Machine Cut Edges) 20mm thick for PLATFORMS, seating top finished copping, etc., of approved quality for wash basin/ vanity counters,pantry etc. of required size of approved shade, colour, and texture laid 20mm thick base cement mortar 1:3 (1 Cement:3 M Sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including machine polishing to edge to give high gloss finish, providing machine cut opening for fixing wash basin, rubbing, curing, moulding & nosing etc. complete at all levels as directed by Engineer-in-Charge.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Providing anti-skidCeramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Dadooing wall tile size of 300x450 mm with following best approved quality, Designed colour ceramic tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supply and Fixing of signage boards with SS post & CP sheets , Boards fixed in dense concrete of depth 2 ft it includes material cost, labour charges, Transport, excavation & concrete.

Supply of Penguin dustbin FRP – 2 Layers to a height of 3½ and width of 2½

GYPBOARD DOUBLE SKIN PARTITION Providing and fixing of Gypsum Dry wall Double skin partition of 75 mm thick using SAINT - GOBAIN GYPROC or Equivalent make and the partition shall be of one layers of tapered edge 12.5mm thk Gypboard screw fixed with dry wall screw of 25mm at 300mm c/c to either side of 48mm studs. GI steel sections to be placed at 610 mm c/c in 50mm floor and ceiling channel 0.55mm thick having equal flanges of 32mm made of GI steel with joints staggered to avoid leakage through joints. Finally square and tapered edges of the boards are to be finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper and 2 coats of Drywall top Coat suitable for Gypsum upto primer level.As per India Gypsum Specs.Note: Angle Bead to be used at external angles to get straight line finish & protection from normal impacts.

Providing and Fixing of HPL board is made up of layers off cellulose fibers impregnated with thermosetting phenolic resin and the decorative design on both sides and is manufactured under combined application of heat (1550 degree delicious) and high pressure (specific pressure : 9MPa/ 90 Bar) provides superior scratch, abrasion, heat, chemical, impact, graffiti and moisture resistance along with anti-bacterial properties and complete hardware accessories in SS finish. The rate inclusive of Material, labour and fixing charges. Make: Merino, Greenlam

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet (Building SOR 23-24, Sch NO-M-0658, PG NO 156 )

Joinery

Teak Wood frames including wrought and put up for frames of doors windows and ventilators and other similar joinery works including providing Iron hold fasts and fixing the frame in position and dismantling the masonry for fixing the hold fasts and redoing the masonry etc . Complete complying with standard specification

Supply and fixing of Teak wood fully panelled and single leaf (two equal panels) shutter for door including all labour charges cost and conveyance of all materials to site etc., Complete as per standard specification

Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the dePart ofmental officers.

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Landscape work

Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.

Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth.

Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller.

Truffing of Korean grass / mexican grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-excavated earth etc as directed by the site incharge.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.......

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-incharge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places......

Best tiled roofing with mangalore tiles including teak reepers ofsize 50x25mm and wind tiles where ever necessary, lime borders etc.,complete as directed during execution.(ISI STD)

Providing and laying wooden flooring(Basket ball court)Laying of water proof Barrier SILPAULIN 120 G S M Manufactured by SUPREME INDUSTRY on the smooth leveled concrete floor, and laying of EPE 10 mm foam as sound deadner on top of the water proof sheet. The primary frames of country wood with the size of 60 x 45 mm, placed at an interval of 450 mm center to center vertically with 72 x 50 x 18 mm Nitrele Resilient pad fixed on the bottom at an interval of 600 mm using screws. The secondary frame of country wood of sizes 60 x 45 mm is placed at an interval of 450 mm center to center horizontally to the primary frames and it is firmly fixed with necessary imported 90 mm self threading screws. On the Runners 20mm thick Tongue & Grooved Best quality Teak wood flooring planks of size 1 ft to 4 ft length and width of 45 mm to 115 mm is fixed using imported flooring Nails (L-cleats) and adhesive. The above floor is leveled with drum sanders with 3 grits rough, medium and nice and polished with imported sportive polyurethane.(one coat primer and two coats of top coat with anti slip)

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

Supply and fixing of SIT UP & PUSH UP BENCH (SINGLE)Abdominal muscles, upper Leg muscle and Back muscle exercise. Also strengthens Arm Shoulders muscles. Size: 1650 x 750 x 1400mm – 4mm pipe Main Post made of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes Double coated Powder coating, Heavy duty sealed Ball bearing, for long lasting life. (Arihant, RMI, Ankidyne or Equivalent Brand)

Supplying and fixing of Lat Pull down / Seated Row: PL 9002 of Glass Fiber reinforced nylon pulleys with deep v-groove provides secure cable seating and fluid bearing rotation. Shroud is applied to protect the equipment or the possible injury during operation Tubing: 2.5 mm to 2.75 mm Square tube differ into any types, from 30 x 60 mm to 50 x 100mm, electro-welded tomaximum integrity. Padtotal thickness is 70 mmDimension: 1764 L x 1019W x 2182 H (mm)ProductWeight: 90.5 kg / 200 lbsWarranty: 1 Year (Brandslike Afton, Plamax, Spirit orequivalent brand)

Supplying and fixing ofHMC Indoor Bike: 5008 ofFrame: Steel tubing withmatt black finishPlasticcover: Matt black plasticwithneongreenhighlights,Flywheel:Φ468mm/20kgsDrive system: Smooth andquiet belt drive (PK5)Resistance: Magnetic withvariable-resistance controlknob Crank: 3 piecechrome-plated crankStandcap:Front:Transportation wheels & height adjustableRear: Height adjustableSeat: Velo: VL-6100M -Gelfilled memory foam. Black &neon green Pedal: Well-go: LU-934. Deluxe model with toe cages and strapsBottle rack: Adjustable,fork-mounted aluminium holder Base tube: Mattblack finish Front stabilizer: Neon greenpaint/ matt black plasticcaps Rear stabilizer: Neongreen paint/ matt blackplastic caps Handlebarheight: Chrome-plated steel pipe with a pulland turn adjustment knobHandlebar: EVA grip withaero riser and bar endsSeat post: Chrome-platedsteel pipe with vertical andfore-and-aft adjustment Setup size: 125.5*62*131.5CM(L*W*H) Warranty: 1 Year

Supplying and fixing ofTreadmill: CT 825 Weighing over 150kilograms , thesteelframeand aluminium consolemasts of our treadmillswithstands rigorouscommercial usePROGRAMSmanual,interval, 5k, hill, fatburn,cardio, fit test, GerkinProtocol Fit Test, 4 militaryreadiness tests (Army,Navy, Air Force, Marines), 2HR, custom HEART RATEcontact and telemetriccompatible (chest strap soldseparately)DRIVE MOTOR:4.0 HP DC drive with gradeH insulation , DECK 1" phenolic, double-sided,wax-coated, BELT 22" x60", Habasit® commercial,multi-ply , FRAME heavygaugehigh-strength steel with durable powder-coatpaint, ALUMINUM mastsand side rails ,MAX USERWEIGHT 450 lbs.Warranty: Frame: LifetimeMotor, Deck, and Parts -5years, Labour – 2 Years(Brands like Afton, Plamax,Spirit or equivalent brand)

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

A)Boxing ring 24’ x 24’ ismade by six tables 12’ x 8’having the followingdetails1. Size 24ft x 24 ft fromcorner poles i.e. totalarea2. Size 20ft x 20 ft fromrope to rope i.e. playing area.3. Height of ring is 1 mt.from ground level4. Four ropes 3.5” thickcovered with synthetic inwhite, blue and red coloror P.V.C. white pipe5. Corner poles made of 4” pipe in white, blueand red color. 6. Laminated waterproofwooden planks of 8’ x 3’and 8’ x 4’ are used on the top of six tables.These planks make levelof the floor equal & nice.7.Totalwooden floor iscovered with 3/4 “ (E.P.)Expended polythenefoam. Then this foam iscovered with waterproofcanvas cover.8. Four protectioncorner padding are usedto cover corner poles to protect injury to player9 . All four corner polesare attached with crosslink tensioned wires withcoupling tighter witheach other diagonally.(USI or equivalentBrand)

Supplying and Planting of Arabian jasmine variety of height 2 to 7.5 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Fixing of Custom Sculpture 6 Feet height made using a combination of stone powder and resin ,Including Loading And Unloading And Labour(Quotation rate)

Supplying And fixing of Tactile (Stainless steel ,Including transport And Labour(Quotation Rate)

Supplying of Rolling Chair, including Loading And Unloading(Quotation Rate)

Supplying of Table (4x2) including Loading And Unloading(Quotation Rate)

Supplying of Sofa 3 Seaterincluding Loading And Unloading(Quotation Rate)

Supplying of plastic chair including Loading And Unloading(Quotation Rate)

Supplying And Fixing of Auditorium Chair including Loading ,Unloading And fixing(Quotation Rate)

Supplying And Fixing of 4 seater dining table and chair including Loading ,Unloading (Quotation Rate)

Supplying And Fixing Wooden fins (WPC) including labour And Material(Quotation Rate)

Supplying and Fixing of Turbo vents including labour and materiall(Quotation Rate)

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900

Supplying And Installation of 16 passanger lift (stainless steel)(Quotation Rate)

Cement paint two coats with good quality of approved cement paint including cost of all material site and all labour charges for mixing applying and proper curring etc,complete as per standard specification for 10 sqm

Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc.,

Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation.

Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth.

Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over.

Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12" to a depth of 8" around the building before laying the plinth projection. This holes has to be be closed after the treatment.

Plumbing Work

INTERNAL

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections,15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer,dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing CP Two Way Bib Cock with Health Faucet with flow Rate of 3.78 LPM at 3 Bar pressure including flexible hose 1m/1.2m long connection and holder for hand spray ,making good the same, complete.of Engineer-in-charge.

Supplying and fixing in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. -

Suppling and fixing in position 15mm.diameter brass / C.P screw down tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supplying and fixing in position C.P.Shower rose Shower Rose - 100mm dia & CP Wall Mixture Tap 3 in 1 system with Hand Showers of approved make confirming to IS specifications and qulity including cost of Shellac thread etc. complying with standard specification.

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.

Supplying and fixing in position Stainless Stee Sink of size 600mm x 450mm x 200mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.

Supplying and fixing in position SS Swan Neck Tap suitable with kitchen sink etc. complete complying with standard specification.

Supplying and fixing in position Indian make bewelled edge mirror of size 600 x 450mm quality including cost of Rawal plugs, brass screws. etc. complying with standard specification.

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.

Internal Water Supply P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

20mm dia Pipe conceled water supply

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

50mm dia Pipe

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

Coupler

20mm conceled

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

50mm dia Pipe

Elbow

20mm conceled

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

50mm dia Pipe

20mm conceled

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

20mm conceled

25mm dia Pipe

32mm dia Pipe

40mm dia Pipe

50mm dia Pipe

End Cap

40mm dia Pipe

Reducer

40mm dia Pipe

50mm dia Pipe

Reducer Tee

40mm dia Pipe

50mm dia Pipe

Reducer Elbow

40mm dia Pipe

50mm dia Pipe

Jet Nipple

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing of approved make of GM Non return valve, suitable for both horizontal & vertical application conforming to BS 1982 tested to a pressure of 15 Kg/sqcm. Including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as required, shutter of brass/SS304 conforming to ASTM B159. as directed by Engineer-Incharge.

Supplying and fixing of GI. puddle flanges (IS 1239) fabricated out of 6 mm thick M.S. plate of size 300 x 300mm plus dia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.as directed by Engineer-Incharge.

40 mm dia

50 mm dia

Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

110mm dia Pipe internal drainage

75mm dia Pipe

40mm dia Pipe

50mm dia Pipe

Supplying PVC Specials P.V.C pipes soil/ waste pipes (with working pressure 6 kg. / sq.cm.) in water supply arrangements (both in internal and external drainage arrangements

Elbow

110mm Pipe

75mm Pipe

50mm Pipe

110mm Pipe

75mm Pipe

50mm Pipe

110mm Pipe

75mm Pipe

50mm Pipe

110mm Pipe

75mm Pipe

Reducer

110mm x 75mm

EXTERNAL

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three Crushed stone sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Construction of sewer chambers of internal dimension of 600x600mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)

Construction of sewer chambers of internal dimension of 600x750mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)

Construction of sewer chambers of internal dimension of 600x900mm depth upto 1.2 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)

Supplying laying and jointing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride)(Schedule-80) pipes complete with necessary solvent cement weldable fittings, confirming to ASTM F-441 for water supply piping in the pumping system. The pipes shall be erected plumb in the risers. Erection of the above pipe including cutting, jointing of pipes with necessary fittings, erection of the pipes plumb to vertical, clamping the pipes on to MS Hot dip galvenized clamps, pressure testing of pipes, complete.. The pipes shall be laid burried Laying work to include excavating the necessary trenches,cutting and jointing and laying the pipes in the trenches.after laying and pressure testing of pipes, the excavated earth shall be back fill and compacted any excess shall be removed from site.

40mm dia UPVC Sch-80

Supplying UPVC Specials pipes (UPVC Sch-80.) in water supply arrangements (external Pumps arrangements)

Elbow

Coupler

Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to the pipes shall be duly laid at site, with necessary cutting & jointing of pipe with approved quality jointing lubricant. The pipes shall be fixed properly aligned and laid to slope. Before handing over, leak test shall be carried out and any defects found shall be rectified. Work shall also include necessary excavation and back filling 'with compaction etc, as directed by Engineer- Incharge (For sewer and Sullage line).

160mm dia Pipe

110mm dia Pipe

Supplying and fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Supplying and fixing in position best quality P.V.C rainwater burried pipe (4 kg. per sq.cm) of various sizes having ISI mark and providing leakproof joints including fixing to the chamber with P.V.Cspecials etc., and making connection to all rain water chambers, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.

Construction of percolation well / rain water harvest pit of of required internal dimension of 1.2mtr Dia upto 2.5 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement, With perforated RCC cover, fixed over 100 mm P.C.C, Rungs, etc. The work shall include necessary exacavation and backfilling placing 2 nos of 160mm dia slotted pipe for 5mtr from the bottom of the catch pit, 25mm coarse aggregate (black pebbles) for filteration.

Supply and installation of equivalent approved make,For pumping the Domestice water from UG Sump to OHT.Each Pumps shall deliver 6m3/hr @ head of 25mtr.,Skid mounted twin booster system with fixed speed system.1 working + 1 stand by. of 3.0 HP Submersible Pump mounted on a common base frame, with common galvanised delivery manifold.2no.s of gate valve and 2nos of non return valves.Control panel, Three phase preventer, with dry run control provision.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc.,by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor's rig, fuel,labour, drilling, betonite mud and water required forlabour, drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used).(2No of Bore well)

Drilling 140 / 150 mm dia Pilot Bore upto 60 m depth ending below ground level.

Reaming from 140/150 mm dia pilot bore to 300 mm dia bore as directed by the TWAD Board Officers upto 60 m Depth ending from ground level

Labour Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD

Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer.

Supply and fixing of PVC special Blue pipes for Borewells

Plain pipes

Slotted special blue pipes

5.0 HP Submersible Pump

3 Phase Panel Board including labour charges

Nylon Rope for Bore-well

Electrical Work

CT Metering Panel (as per the TANGEDCO norms) - Design, Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., RYB indication lamps, internal wirings, and other required accessories for the complete operation as per the Tangedco requirements. Necessary approval to be obtained from Tangedco before procurement including all associated control wiring. 1set of 200/5A LT CT with TNEB metering provision and 1 nos of 200A /5A CT for APFC.. For all items in this section, the rate includes necessary supports as required at site. No extra payment will be made for the same. Rate shall inclusive of factory witness test and all accessories, breakers , control wiring, models has to be followed as per the technical specification. (Rate as per Quotation)

200A Isolator Panel - Design, Supply, Installation, Testing and Commissioning of 200A 4P MCCB isolator panel of CPRI approved make, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors complete with electrolytic grade copper bus bars, Digital voltmeter and Ammeter, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, RYB indication lamps, etc., and other required accessories for the complete operation as per the Tangedco requirements. (Rate as per Quotation)

Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. (MDB).(Rate as per Quotation) Incoming 2 Nos: 200A 4P 25KA MCCB with mechanical interlocking arrangement. Each incomers shall have 1 set - Multi Function meter (Having the parameters of Ammeter,Voltmeter and KWH meter,Harmonics level of TRMS). 1 set - LED type RYB,ON,OFF,TRIP indication lamps. 1 set -200/5A CT CL 1.0 10VA Outgoings: 4 Nos - 63A 16KA TPN 16kA MCCB with LED type RYB,ON,OFF,TRIP indication lamps. 2 Nos - 40A 16KA TPN 16kA MCCB with LED type RYB,ON,OFF,TRIP indication lamps. 4 Nos - 32A 16KA TPN 16kA MCCB with LED type RYB,ON,OFF,TRIP indication lamps.

With necessary Aluminium busbars of 200A TPN , interconnection providing Digital combined meter, phase indication lamp, fuse and switch control etc. in the incomer. Note : All the Outgoing feeder shall be having 'on',off,trip' indication lamps..All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing. The board shall be fabricated for future extension of the panel board. BUS BAR RATING: 200A TPN 25KA for 1 sec. Aluminium bus bars (Current Density not less than 0.8A/Sq.mm.) with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus. Earthing : 25 x 6mm Aluminium flat Cable Entry & Exit : Top Cable Gland Plate : 3mm thick MS sheets Note: All MCCBs shall have rotary handle mechanism and spreader wherever necessary.

Supply, Erection, Testing and Commissioning of 160 KVA Diesel Generator set with AMFcontrol panel, comprising of Water cooled CPCB-II developing @ 1500 RPM and Alternator, complete with type approved canopy and all accessories. with the following technical specification: *Industries most reliable engines, proven over decades. *Low emission, High efficiency. *Compact, robust and rugged design. *Engine Dry type air cleaner *Exhaust Silencer (Residential type) Hospital Grade. *Expansion bellow *Lube oil cooler Lube oil filter (“Spin-on” type) *Fuel Filter (“Spin-on” type) *In line mono block fuel injection pump with Electronic Governor and fuel feed pump. *Dynamically balanced Flywheel with starter ring *Electronic Governor : Governing class G2 (as per ISO 8528 part V) *SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator.

*Exhaust gas turbocharger 12 Volt electric starter motor 12 Volt, 10 amps. Battery charging alternator *Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button. ALTERNATOR 160 KVA, Three phase 415V, 0.8 pf 4 wires 50 hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 160 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank:200 Letters Capacity inbuilt Fuel Consumption: 100% = 18.8Litres/hr.75% = 13.8Litres / hr.50% = 9.9Litrs/hr. Battery: 12V DC, 130AH Supply of AMF Control Panel Suitable for 160 KVA DG set for EB Services with byepass arrangement. (Make: Kirlosker, Koel or equvalent).The rate incuding the transport charges and necessory accessories etc., to complete the work.(Rate as per Quotation)

Supplying, erecting, testing and commissioning of machine room less passenger Elevator having 16 passengers capacity, rated speed 1.0 mtr. / sec., for GF & 1st floor, 400 volt 3 phase, 50 Hz, AC variable voltage variable frequency derive with speed encoding, simplex full collective with / with out attendant, microprocessor based controller located top floor, variable frequency regenerative drive, flat polyurethane coated belts for traction media, stainless steel panels with hairline finish for car and door, gearless with permanent magnet motor located in the shaft top, all openings are located at the front of the hoist way, with centre opening Automatic with ACVVVF door operator with electronic door protective system, stainless steel hairline finish sliding doors, painted frame with down light false ceiling, Stainless Steel mirror finish hand rails, granite flooring of client choice, sixteen segment digital LED display position indicator in all floors, digital car position indicator, over load warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby, with automatic rescue device, intercom between lift car and lobby and controller, voice synthesizer, 60 minutes fire rated car door. Car Entrance :- Clear opening

Distribution System

Supply and fixing of 7 segment 12 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 36 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-585)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4P MCB sheet steel enclosure with 1 no 63A 4P MCB switch with necessary fixing accessories

Supply and fixing of 32A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Luminaires

Supply and fixing of 6 Metre Length Single Bracket Pole with (250 x 250 x 6mm) MS base plate duly welded at the bottom with suitable SMC box with door arrangement to house 10A SP MCB , 2/4way connector on suitable hylem sheet and with supply and fixing of Flood light luminaire with Housing made of aluminium & self supported steel frame work, High efficiency polycarbonate optical lens, Excellent thermal management heat sink, Luminous flux up to 7200 lm ± 300 lm (60W),Mounting bracket to facilitate proper aiming of the luminaire at desired angle during installation, IP67 Connectors, Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply complete with suitable MS Brackets for 6x60W LED Flood light fitting(KLite-KL-4207-ASTON-6) and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Supply and fixing of 6 Metre Length Single Bracket Pole with (250 x 250 x 6mm)MS base plate duly welded at the bottom with suitable SMC box with door arrangement to house 10A SP MCB , 2/4way connector on suitable hylem sheet and with supply and fixing of Flood light luminaire with Housing made of aluminium & self supported steel frame work, High efficiency polycarbonate optical lens, Excellent thermal management heat sink, Luminous flux up to 7200 lm ± 300 lm (60W),Mounting bracket to facilitate proper aiming of the luminaire at desired angle during installation, IP67 Connectors, Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply complete with suitable MS Brackets for 48W LED Flood light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Supply and fixing of 6 Metre Length Double Bracket Pole with (250 x 250 x 6mm) MS base plate duly welded at the bottom with suitable SMC box with door arrangement to house 10A SP MCB , 2/4way connector on suitable hylem sheet and with supply and fixing of Flood light luminaire with Housing made of aluminium & self supported steel frame work, High efficiency polycarbonate optical lens, Excellent thermal management heat sink, Luminous flux up to 7200 lm ± 300 lm (60W),Mounting bracket to facilitate proper aiming of the luminaire at desired angle during installation, IP67 Connectors, Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply complete with suitable MS Brackets for 48W LED Flood light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Supply and fixing of 50W LED Compound wall Light with Housing made of aluminium & self supported steel frame work, IP65 Connectors, Mounting bracket to facilitate proper aiming of the luminaire at desired angle during installation,LED driver and suitable for operating on 240V, 50Hz single phase ac supply and necessary accessories etc,. to complete the work.

Supply and fixing of bollard light 10W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 12W LED 4000 K round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Klite-KL-3612- Bema7)

Supply and fixing of 22W LED 4000 K round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Klite-KL-3613- Bema7)

Supply and fixing of 24W LED 4000 K round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Klite-KL-3323- Diva Deep Round)

Supply and fixing of 40W, 4FT LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.(Klite-KL-1589- Powerline)

Supply and fixing of pressure die cast aluminium housing Bulk Head 10W LED fitting with IP65 protected with PVC unsheathed copper leads from terminals to the fitting. model equivalent to Crompton LBHE-10-CDL (Philips/bajaj/crompton/K.Lite )

Supply and fixing of 18W LED 2 ft mirror light on wall with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 1 Set of 24V 2835 Flexible LED Strip light in false Ceiling with LED Driver complete accessories. (Klite-KL-7281- Powerline)(Rate as per quotation)

Supply and fixing of Wall bracket light 10W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply, installation, testing and commissioning of 200 W LED High Bay Light fitting in PDC Housing suitable for Ceiling / roof sheet mounting, The luminaire has efficacy of 125 lm/w .ITt has 10KV SPD & IP 66 additional safety chain with made out CRCA powder coated body and including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive (K-Lite-High bay-2873)

Supply, installation, testing and commissioning of 60 W LED Round Low Bay Light fitting in PDC Housing suitable for Ceiling / roof sheet mounting, The luminaire has efficacy of 125 lm/w .ITt has 10KV SPD & IP 65 additional safety chain with made out CRCA powder coated body and including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive

Supply, installation, testing and commissioning of 20 W LED Hanging Light fitting in PDC Housing suitable for Ceiling / roof sheet mounting, The luminaire has efficacy of 125 lm/w .ITt has 10KV SPD & IP 65 additional safety chain with made out CRCA powder coated body and including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive

Supply, fixing, testing and commissioning of Exit Sign -1.5watts LED with Battery Back.(Size of 2' x 3/4') with all necessary suspension accessories,etc.,(Rate as per quotation)

Supply, fixing, testing and commissioning of Addressable LED 8W EXIT Light with direction self contained maintained type with 3 hours backup (Size of 2' x 3/4')with all necessary suspension accessories,etc.,(Rate as per quotation)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") ( SD-106 )

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall ( SD-114 )

Supply and fixing of 300mm(12")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required. (SD-115)

Cables and end terminations

Supply and laying of following XLPE armoured HT / LTUG cable in a Earth / Trench / Tray with suitable cable tie tag etc as required.

Supply and laying of 31/2 core x 120 Sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-664)

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-663)

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good(SD-659)

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-658)

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-657)

Supply and clamping of following XLPE armoured LTUG cable on post or on wall MS-Clamps , Saddles, plugs, Screws etc., as required.

Supply and Clamping of 4C x 10 sq.mm. PVC armoured LTUG copper cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-198)

Supply and Clamping of 4C x 16 sq.mm. PVC armoured LTUG copper cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-199)

Supply and Clamping of 4C x 25 sq.mm. PVC armoured LTUG copper cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-200)

Supply and fixing of double compression brass cable gland for following Aluminium/copper conductor XLPE insulated armoured cable of 1100 V grade with earth connection.

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection(SD-169)

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection(SD-168)

Supply and fixing of brass cable gland for 4 x 25 sq.mm. LTUG armoured cable with earth connection(SD-163)

Supply and fixing of brass cable gland for 4 x 16 sq.mm. LTUG armoured cable with earth connection(SD-163)

Supply and fixing of brass cable gland suitable for 4C x 10 PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of the following size PVC LTUG aluminium / Copper armoured cable with necessary aluminium / Copper cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. HT / LT Cable)

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-218)

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-217)

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-213)

Supply and providing cable end termination of 4C x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-213)

Supply and providing cable end termination of 4C x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-213)

Supply and providing cable end termination of 4C x 25 sq.mm. PVC LTUG Copper armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-213)

Supply and providing cable end termination of 4C x 16 sq.mm. PVC LTUG Copper armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-213)

Supply and providing cable end termination of 4C x 10 sq.mm. PVC LTUG Copper armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD-213)

Point Wiring

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4points / Coil) Higher End (SD-285)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 1 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for PVC concealed light (8 points per coil) (for rooms like bath, toilet & pumproom, etc.). (SD-306)

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End(SD-298)

Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End(SD-317)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End (for Raw Power)(SD-308)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion (SD-337)

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.(SD-351)

The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc,(8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement )

Perforated type Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height

Perforated type Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height

Supplying and fabricating of MS structural steel supports for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.

Supply, Installation, Testing and Commissioning of 10KVA independent ON LINE UPS with 12V/42Ah SMF battery-backup upto 30mins with the following specifications; * Input 3ph 415V and Output 3ph 415V. * DSP Technology with IGBT Based Inverter. * Smart LCD Display for Real-time Information. * CVCF (Constant Voltage Constant Frequency) Operational Without Battery. * Adjustable Battery Number (29, 30, 31 & 32 Numbers) in all 360V Models. * Immune to Reverse Phase Sequence & no Neutral Operation. * Built-In Maintenance Bypass & Static Bypass Switches. * Configurable Output Voltage Setting. * Input Filter for Power factor 0.9 (Optional) Available. * Conformal Coated PCB Assemblies to withstand Harsh Environment. * Inbuilt Charger of 20 Amps. , Parallel Redundancy & Battery Reverse Protection in all 360V Models. * Alarm for Mute Mode and SNMP Card (Optional) * Over Temperature Indication & Protection. * Output Frequency Fixed at 50Hz or can be synchronized with Input Frequency. * RS-232 & USB Port & RS-485 Port available.The rate includes the battery stand, connecting leads,Transportation charges and necessories acessories etc., to complete the work.(Rate as per Quotation)

EARTHING SYSTEM

Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included. (Rate as per Quotation)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-211)

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work (SD-212)

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work(SD-77)

Supply and run of 25mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work (SD - 75)

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth (SD-78)

Lightning Protection System

LIGHTING ROD Supply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level (Rate as per quotation)

MOUNTING STRUCTURE Supply of Standard / Special Mounting Structure of height 4.5mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter (Rate as per quotation)

DOWN CONDUCTOR Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection (Rate as per quotation)

TEST LINK Supply of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance (Rate as per quotation)

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp (Rate as per quotation)

SURGE PROTECTION Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network) (Rate as per quotation)

CCTV System

Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR with 4nos 8TB Hard Disk Drive, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire /ship / temperature / temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).

Supply, Installation, Testing and commissioning of 16 channel 8 SATA NVR, with 6T Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic) (Rate as per quotation enclosed)

Supply of 8MP, Internet Protocol fixed Dome CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic) (Rate as per quotation enclosed)

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). (Rate as per quotation enclosed)

Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories. (Rate as per quotation enclosed)

Supply and Clamping of CAT 6 armoured cable in 25 mm PVC pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser),Tertiary (Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 16 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supply and Fixing of Rack with Accessories -Higher end 42 U Rack with LNS unit and fan extra for the above rack.

Supply and Fixing of Rack with Accessories -Higher end 4 U Rack with LNS unit and fan extra for the above rack.

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. ( Rate as per quotation )

PA System

Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent) (SR-2024-2025, M-2151, P-220)

Supply, fixing & Testing of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent) (Rate as per quotation)

Supply and run of 2core 1.5 Sqmm armoured speaker cable with 25mm PVC pipes on wall, tray and ceiling etc. complete.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310, IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth. (Rate as per quotation)

Safety Accessories

Supply of 5m x 4m Rubber 3mm thick Mat suitable for LT installation confirming to IS (Rate as per quotation )

Supply of First Aid Box complete with all First Aid Medicines (SR-2024-25, Pg.no.207, U.code.8, M-1977)

Supply of Shock Treatment Chart fixed in glass frame (SR-2024-25, Pg.no.207, U.code.8, M-1978)

Supply of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle (SR-2024-25, Pg.no.207, U.code.8, M-1979)

Supply of Hand Gloves (Rate as per quotation )

Supply of Danger Board as required by the Electrical Authorities (SR-2024-25, Pg.no.207, U.code.8, M-1981)

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms (SR-2024-25, Pg.no.207, U.code.8, M-1982)

FIRE ALARM SYSTEM

Supply, intallation, testing and Commissioning of the following system as per the technical specification. 'Analogue addressable micro Process - controlled Fire Alarm Control Panels with interfacing box, capable of being to the central monitoring System, to monitor and integrated the following quantity of accessories like detectors, MCP's/hooters/control modules, Fault Isolation Modules, hooters, response indicators, fire/fault indicators, audio-visual signals, central processing units, complete with LCD display, zone indicating LEDs as per the detailed specification: complete with Battery backup for 48 hours in standy mode and 30 minutes in alarm condition. The system should be capable of detecting fire within 3secs as per UL 9th edition/FM approval with charger for each panel. Each loop should provide with minimum 126 detectors and 126 devices. Fire panel should be RS-485 communication port and integrate with other fire panel and Repeater panel

1 Loop Panel ( Slave panels @ respective floors )(SR-2024-25, Pg.no.234, U.code.8, M-2403)

POWER SUPPLY : 24VDC Power Supply with 5 amp rating,having LED indications for Power supply ON,battery Fail,Battery Charging,battery back up etc with all accessories etc., complete the work..(SR-2024-25, Pg.no.235, M-2419)

Graphical software for entire fire alarm panels including detector configuration, commissioning etc

Addressable Active Repeater Panel consists of displayboard having 160 Character Display with Touch key pad, Mother board which will have 64 Bit Processor, Inbuilt RS-485 Networking Circuit for peer to peer networking with all accessories etc., complete the work..(SR-2024-25, Pg.no.234, M-2407)

Addressable analogue Multi-sensor / Combination smoke sensor with dual chamber, solid state design, indicating LED, mounting base, as per detailed specifications.(SR-2024-25, Pg.no.234, M-2410)

Conventional type Horn / Strobe wall mounted typerated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication with all accessories etc., complete the work. (SR-2024-25, Pg.no.234, M-2415)

Hooter with relay module Conventional type Horn wall mounted type rated at 100 dBA @ 1m for Audible annunciation. with all accessories etc., complete the work.(SR-2024-25, Pg.no.235, M-2416)

Addressable Manual Call Point - Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility with all accessories etc., complete the work.(SR-2024-25, Pg.no.235, M-2413)

Fault Isolator Module capable of monitoring shorted loop circuit and automatically restore communications with all accessories etc., complete the work.(SR-2024-25, Pg.no.235, M-2417)

Response indicator for mounting on false ceiling at the entries of the cabin for indicating the operation for detectors in the above areas including Backbox with all accessories etc., complete the work.(SR-2024-25, Pg.no.235, M-2418)

Supply and run of 2core 1.5 Sqmm armoured FRLS ZH fire Survival cables with 25mm PVC pipes on wall, tray and ceiling etc. complete. in celing with suitable clamps and screws (RED colour)

Solar System

Grid Connect SPV Power System – installed on Rooftop Solar Power generating System 10 KWp,415 V AC 50 Hz, complete with SPV modules,interconnecting accessories, mounting structures and PCU Transformerless inverters.Installation and Commissioning Charges (includes module clamping foundation on your rooftop as per our standard methods,aligning modules in south facing area on the rooftop, interconnecting and cabling upto Control Room, installation of PCU and necessary wiring,Module temperature sensor , Ambient Temperature sensor, Data logging system in built in th ePCU, junction box and all includes earthing materials. – (Wiring from PCU to Load / ACDB shall be considered.)The grid tide system required for connect the solar system into grid connected panel for 10 KWh of solar power system

Supply, Installation, Testing and Commissioning of Solar Power Plant Grid-Tie System for 10KWp various components with technical Specification as follows:

Supply, Installation, Testing and Commissioning of Solar Photovoltaic Module PV Panel(10KWp)-30 nos Specification: Model : 335Wp. Open Circuit Voltage (Voc) : 46.12V. Short Circuit Current (Isc) : 9.32A. Voltage maximum (Vmax) : 37.40V. Current maximum (Imax) : 8.83A. Maximum power at STC 25’C (Pmax) : 330W. Maximum system voltage : 1500V. Operating temperature/humidity : 20'c to 90’c /85%. Solar cell : 72 Polycrystalline silicon cells. Module dimensions : 1968mm X 956mm X 40 mm. Module weight : 21 Kg. Oblong Hole : 9mm X 13mm. Terminal Box : IP-65. Bypass Diode : 20 A, 1000V. Cable Connectors : 4 sq mm / MC4. [Make: IEC Tested and Certified (Warree, Emmvee, Adani,HHV Swelect, Luminous)] (The panels must have 10 years or above warrenty period)(Rate as per quotation)

Supply, Installation,Testing and Commissioning of Solar Ongrid Inverter with inbuilt Solar optimizer , MPPT Charge Controller. Capacity : 10KW. Specifications :- Nominal voltage : 3-NPE 400V/230V AC nominal output (Pac,r) : 5000W Max. Output Power : 10000VA Max. Output Current (Iac max) : 25A. Operating Frequency Range : 50Hz/60Hz (45 Hzto 65Hz) Total harmonic distortion : < 2%. Max. efficiency : 98.1 % Power factor (cos φac,r) : 0 - 1 ind./ cap. temperature range : -25C to +60'C with data logger and web server(The inverter must have 5 years or above warrenty period)(Rate as per quotation) (Make: Fronius/Schneider /JFY/ INVT, or equivalent)

Supply, Installation, Testing & Commissioning of Array Junction boxes (AJB) with remote PLC link,weather proof (IP- 65) of appropriate standard for 10 kwp solar PV plant along with required protection and isolation system Surge protection, DC rated MCB complete etc as required.space for termintion of cable as per specification (From PV array to AJB) Make: ABB /Siemens/Schneider Electric .(Rate as per quotation)

Supply, Installation, Testing & Commissioning of Main Junction boxes (MJB) with remote PLC link,weather proof (IP-65) of appropriate standard for 10 kwp solar PV plant, space for termintion of cable as per specification, etc as required (From AJB to MJB) Make:ABB /Siemens/Schneider Electric.(Rate as per quotation)

Supply, Installation, Testing & Commissioning of 1100volts solar DC Cables: Copper conductor multistand XLPE/PVC Insulated and UV stabilized PVC sheathed single core and Multicore solar cable & wiring as per specification complete. Make: Havells/ Polycab, Finolex /Advance/KEI (Rate as per quotation)

Supply, Installation, Testing & Commissioning of 1100volts solar AC Cables: Copper conductor multistand XLPE/PVC Insulated and UV stabilized PVC sheathed single core and Multicore solar cable & wiring as per specification complete. Make: Havells/ Polycab, Finolex /Advance/KEI (Rate as per quotation)

Supply and making end termination with brass double compression gland and copper / aluminium thimbles for XLPE insulated and PVC sheathed copper conductor cable of 1.1 kv grade of the sizes as required for the cables. Make: Havells/ Polycab, Finolex /Advance/KEI (Rate as per quotation)

Supply, Designing, Testing & Erection of Mounting structure design to withstanding Wind velocity up to 120 km / hr, Structure material – AL Low lying V channel aluminum alloy. Bolts, nuts, fasteners, required for panel mounting. Standard Make: design as per BIS – Hot Dip Galvanized.(Rate as per quotation)

Earthing with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt. (Rate as per quotation)

Lighting Arrester Early seamer piezo-electric type lightning arrestor Supply, fixing , Testing & Commissioning of bare GI flats/ wires including all necessary fixing accessories and effecting connections. (Rate as per quotation)

JAYAM ENGINEERING AND CONSTRUCTION (BID ID -1211191)