Loading
Loading…
Loading…
Tender Value
₹3.8 L
EMD Value
₹7,567
Closing Date
13 Jul 2026, 3:00 pm5d left
Executive Engineer PRI NMA Mayabunder
Office of Executive Engineer PRI NMA Mayabunder
Repair and Maintenance of Public Toilet at Pareshnagar-I under Gram Panchayat, Basantipur.
2026_RDPRI_23651_1
155/EE/PRI/NMA/MB/25-2026
Open Tender
Civil Works - Buildings
90 days
Basantipur
Refer Tender Document
5 documents required · 5 mandatory
₹500
Executive Engineer PRI NMA Mayabunder
₹7,567
7 Jul 2026
7 Jul 2026
13 Jul 2026
7 Jul 2026
13 Jul 2026
7 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. | |||||
| 1.01 | One or more coats on old work | - | sqm | - | - |
| 2Finishing walls with Acrylic Smooth exterior paint of required shade : | |||||
| 2.01 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | 1 | sqm | - | - |
| 3Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||||
| 3.01 | Two or more coats on new work | 1 | sqm | - | - |
| 412 mm cement plaster: | |||||
| 4.01 | 1:4 (1 cement: 4 River sand) | - | Sqm | - | - |
| 5 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | 1 | metre | - | - |
| 6Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Tenderdocument155.pdf
Tender Documents • 2.15 MB
BOQ_25066.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid