Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹49.2 L+₹1.2 L (2.50%)Rejected-Finance SAHEBPARA RAOD UPPER BAGDOGRA P O BAGDOGRA DISTRICT DARJEELING WEST BENGAL PIN 734014 | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L2 | Rejected-Finance Not lowest Bidder | |
| 3 | L3₹49.4 L+₹1.4 L (2.88%)Rejected-Finance | L3 | Rejected-Finance Not lowest Bidder | |
| 4 | L4₹49.4 L+₹1.4 L (2.98%)Rejected-Finance | L4 | Rejected-Finance Not lowest Bidder | |
| 5 | L5₹49.8 L+₹1.8 L (3.74%)Rejected-Finance OPP GATE NO 02 PO NORTH BENGAL UNIVERSITY | DARJEELING | DARJEELING | WEST BENGAL | L5 | Rejected-Finance Not lowest Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
9 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BENGDUBI
Bengdubi Military Station PO-Bengdubi,Dist-Darjeeling, Pin 734424
REPAIR TO JOINERY AND OTHER COMPREHENSIVE MAINTENANCE TO CERTAIN UNITS ARE UNDER AGE B R I OF GE BENGDUBI MIL STN
2023_MES_581538_1
8421/E8
Open Tender
Civil Works
Item Rate
270 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(i)
8 documents required · 8 mandatory
₹500
GE BENGDUBI
₹90,000
Yes
20 Mar 2023
17 Feb 2023
11 Mar 2023
17 Feb 2023
9 Mar 2023
4 Mar 2023
18 Feb 2023 - 22 Feb 2023
Amount
Taking down chowkats or frames with shutter(without taking off shutter from the frame) area not exc. 1.5 sqm complete all as specified and directed.
Taking down chowkats or frames with shutter(without taking off shutter from the frame) area exc. 1.5 sqm but not exc4.0 sqm complete all as specified and directed.
Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing form site of work complete all as specified and directed.
M&L pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary hinges, lock strike plate, fixing lugs etc complete as specified.
M&L pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary hinges, lock strike plate, fixing lugs etc complete as specified.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 30 mm thick 2nd class hard wood glazed and skeleton window shutters open rebated and prepared to receive glass, gauze etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b).Window complete all as specified and directed.
S&F 35mm thick 2nd class harwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey complete with glazing bars dovetailed or welded complete all as specified and directed.
S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey complete without glazing bars dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung double shutter ( one for glazing and other for mosquite proofing ) including projection type hinges with steel handle, and steel peg stay, complete with guard bars, dovetailed or welded complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading complete all as specified and directed.
S&F 250 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing and sliding bolt of extruded section and fixed to any type of shutter with screw complete all as specified and direcetd.
S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 100 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified and directed.
S&F 150mm size aluminium handle cast type complete all as specified and directed.
M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.
Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.
S&F 4 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC on top layer of 5mm finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separately under respective item of this schedule.
Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent)
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar 1:3 over/soffit of chajja finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of 1mm thick wall care putty complete all as specified and directed.
M&L for preparing new plastered surface on ceiling and applying two coat of oil bound distemper white or any tint over 1mm thick wall care putty etc complete as specified and directed.
Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed.
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed.
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L glazed ceramic coloured tiles (450 X 300 X 7mm) thick as in vertical surfaces set & jointed in neat cement slurry & pointed in white or coloured cement to match the existing surface complete all as specified and directed.
M&L for pre polished coloured cement concrete chequred tile with grey cement and no pigment of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed cement mortar 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size nconfirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 25mm thick sand filling layer well rammed and compacted complete all as specified and directed,
Dismantling wall and ceiling board( fiber, pulp, insulation, etc.) or insulation board/slab/ blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for providing and fixing PVC FALSE CEILING consisting of 600x600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600Kg/Cbm Density manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T- section of sizes 1"x1" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2'x2'(600x600mm). the aluminium frame work is supported from the ceiling with the help of "J" hook and GI wire/6mm MS rods of require sizes to maintain proper level etc. The aluminium framework is supported on side wall with the use of aluminium L-section of size 1"x1"(25x25mm) angles etc. complete as specified by manufacturer & drawing and directed.
Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed. Note:-Fillets, metal frame work and G.I. wire mesh paid separately.
S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
S&F 4mm thick designed Non asbestos fiber cement building boards, fixed or laid /inserted to timber /GI /Aluminium frame-work with screws in ceiling work complete all as specified and directed.
M&L for Anodised aluminium snap grid frame 605 x 605mm for false ceiling and Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified directed.
M&L for applying two coats of synthetic enamel paint on false ceiling including preparation of surfaces of any description over to 10 cm width or girth complete all as specified and directed.
Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed.
Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed.
S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.
S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and directed.
S&F 75mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repair for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 100 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
Dismantling water tanks and removing to store exc 250 ltr but not exc 500 ltr capacity complete all as specified and as directed.
S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed.
S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and directed.
S&F Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20 mm bore complete all as specified and directed.
S&F in repair Bib tap 15 mm, fancy type, long swan neck, CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F in repair fancy type stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.
S&F in repairs CP brass shower rose 125 size dia complete all as specified and directed.
S&F in repair Vitreous china wash down water closet European type (pedestal pattern) (excluding flushing cistern and flush pipe) including connection to outgoing pipe and seat cover and flushing pipe complete all as specified and directed.
S&F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle and flush pipe including brackets etc complete all as specified and directed.
S&F in repair vitreous china wash hand basin in repair oval special type 510x410mm including CP fancy type 15 mm pillar taps including 32mm dia PVC waste pipe, and 32 mm dia brass CP waste coupling complete all as specified.
S&F PVC connections pipe ,15mm dia size with PTMT nuts of length 600mm complete all as specified and directed.
S&F Soap dish brass chromium plated fixed with chromium plated brass screws complete all as specified and directed.
S&F in repair D type tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed.
Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness( below or above ground level) complete all as specified and directed.
M&L for PCC 100mm thick 1:4:8 type D 2 using 40mm graded stone aggts as in floor,path dtc finishing the surface even and smooth without using extra cement complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-A. complete all as specified and directed.
M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings incl ridges, hips and valley gutter complete all as specified and directed.
Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified anddirected
S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.
S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as speecified and directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as speecified and directed.
M&L for Anodised aluminium window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
M&L any size mesh aluminium anodised grills of approved designs complete all as specified and directed.
S&F Mortice lock aluminium, vertical type, size 100 mm complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
M&L for sheet glass,5.5mm thick, ordinary quality and glazing with oil putty in squares exc. 0.50 Sqm each pane ground or obscured or frosted, on one sidecomplete all as specified and directed.
S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes, complete all as specified and as directed.
S&F finial fancy type for curtain rod in pair etc complete all as specified and directed.
S&F bracket for curtain rod in pair etc complete all as specified and directed.
S&F jet spray with 01 mtr PVC tube (Stainless steel) complete all as specified and directed.
S&F in repairs two way angle cock 15mm bore cast copper fancy CP alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
M&L for preparing the back surfaces of chaukhats and treating them with tar or coal tar black paint complete all as specified and directed.
M&L for cement concrete 1:3:6 type B1(using 20mm graded stone aggregate)as in hold fast and filling of pressed steel chaukhats etc complete all as specified and directed.
S&F in repairs glass shelf assembly consisting of 5.5mm thick sheet glass with CP brackets and CP frame size 600mm long complete all as specified and directed.
S&F in repairs CP central basin mixer with U shaped round casted sprout with 450mm long baried houses complete all as specified and directed.
S&F in repairs table top vitreous china wash hand basin ovel type basin white/ coloured, size 610 x560mm including CP waste coupling but excluding taps, waste chain & plug complete all as specified and directed.
Demilition of old existing unserviceable EWC seat and S&F western wall mounted one piece water closet ceramic western toilet/commode/European commode square with soft close seat cover white including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc complete all as specified and as directed. Make- JAQUAR/ CERA/Hindware.
S&F in repairs Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. Make- JAQUAR/CERA/Hindware.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and as directed.
M&L for Granite (of any type) work(table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Schedule of Credit refer serial page No 31(R) & 32(R) of Subject tender
M/S G D CONSTRUCTION
PRADIP KUMAR BOSE
NAYAK BROTHERS
GAYATRI BUIDERS
Paritosh Saha
Prahalad Rai
SHRI S K BHATTACHARJEE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .