EDCH-105/2024-25

Amount

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

ST Pole 11 Mtr. Long

Earthing Complete

11 KV Pin Insulator with Pin

11 KV Disc Insulator with Fitting Complete

11 kv X-arms with clamp

Teeoff Channel

Stay set Complete

M.S Top Channel

Dropper Channel

11 kvTPMO

LT XLPE Cable

LT PVC cable

LT AB Cable

Cable Jointing Kit

Suspension clamp

Dead End Clamp

Pearcing Connector

Distribution Box With Clamp

Fuse Set

Errection of ST Pole 11 Mtr. Long with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work

11 KV Pin Insulator with Pin

11 KV Disc Insulator with Fitting Complete

11 kv X-arms with clamp

Teeoff Channel

M.S Top Channel

Dropper Channel

11 kv TPMO

11 kv Fuse Set

Cable Jointing Kit

Distribution Box With Clamp

Suspension clamp

Dead End Clamp

Pearcing Connector

Providing & Fixing of Clamp with Bolt & Nut

Providing & Fixing of Red Oxide Paint

Providing & Fixing of Aluminium Paint

Providing & Fixing of Nut, Bolt & washer

Providing & Fixing of Aluminium Lug

Providing & Fixing of LT Tailless Unit

Providing & Fixing of Eye Bolt/Eye Hook

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

LT PVC cable

LT XLPE Cable

LT AB Cable

Installation of 250 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

Construction of plinth of size 5' * 5 * 4' above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.

Pipe earthing of 250 KVA medium Power Transformers

Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut

VINAYAK ELECTRICALS (BID ID -4965966)

GOSWAMI ENTERPRISES (BID ID -4965768)