SPECIAL REPAIRS TO TOILETS OF BILLETS IN AF STN PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L Glazed Ceramic Coloured Tiles, 450X300X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado,etc,over and including 15 mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including screed bed 20 mm thick in cement motar 1:6 complete all as specified and directed.complete all as specified and as directed.

M&L Rounding to edge of stone slabs one edge,such as in steps, cooking platform,and other similar situations complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and directed.

M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and directed.

Fixing only 15mm dia tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

Fixing only 20mm dia tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

M&L for GI tubing 25mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) , Pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete, Plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

Supply and fixing brass chromium plated Two way bib cock with wall flange 15mm dia all as specified and directed.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.

Supply and fixing PVC floor trap 75mm including chormium plated grating all as specified and directed.

S&F in repair Vitreous China urinals, bowl/ half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing , flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repair 15 mm dia PVC connection 60 cm long including CP brass check nuts etc complete all as specified and directed

Cutting of existing steel tubing for alternation or addition of 15m m dia pipes all as specified and directed.

Cutting of existing steel tubing for alternation or addition of 20m m dia pipes all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not xc 10 cm girth in stone/concrete walls complete all as specified and directed by Engr-in-Charge.

M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed

Dismantling of PVC water tanks of exc 250 and n.exc 500 ltr capacity and removing to store and all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene double layer water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge. (Make : Syntex)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. for exc 1000 ltr & n.exc 2000 ltr tank all as specified and directed.

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back with and including providing CI brackets, 15mm bore brass CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.

S&F in repair 15 mm bore angle valves fancy,cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed bothends for iron pipe 20 mm bore and fixed

S &F in repair 15mm dia stop valves cast copper alloy, screwed donw high pressure with crutch or butterfly handle screwed both ends for iorn pipe or for unions and fixed (concealed type) all as specified and directed.

S &F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. (Make :Prayag/hindware/Jaguar)

Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar all as specified and directed.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors all as specified and directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors all as specified and directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia all a specified and directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 110mm dia all a specified and directed.

S &F 110mm dia of PVC (SWR) branch piece, single (Double Y) equal or unequal all with acess dooras specified and directed.

S &F 110mm dia of PVC (SWR) junction single T equal or unequal all specified and directed.

S &F 110mm dia of PVC (SWR) junction single T equal or unequal all with acess dooras specified and directed.

S &F 75mm dia of PVC (SWR) junction single T equal or unequal all with acess dooras specified and directed.

M&Lfor PVC (SWR) vent cowl of 110mm dia all as specified and directed.

Taking down door/window/ventilator chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S F Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21

S&F 100 mm long, Aluminium barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

M&L for cement concrete type C1 1:3:6 (12.5 mm graded aggregates) for filling back side of frame, hold fast and padding concrete on roof as reqd all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

S & F 3mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection

Demolition of brick/blolck masonry built in cement mortar all as specified and directed.

M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) and set in CM (1:6) all as specified and directed.

M&L for brick work with subclass B bricks, straight or curved on plan set in cement mortar 1:4 all as specified and directed.

M&L for walling of random rubble uncoursed well bonded, bedded and solidly hearted, built in cement mortar 1:4 all as specified and directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

M&L rendering 15mm thick on concrete on CM 1:6 and is to be finished even and smooth with out using extra cement complete all as specified directed

M&L for 5mm thick cement plaster in CM 1:3 on fair faces of concrete surfaces and finishing the surface even and smooth (without using extra cement) etc all as specified and directed.

M&L for 20mm thick cement plaster in CM 1:4 on fair faces of stone or concrete surfaces all as specified and directed.

M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

All as per item No. 67 above but on walls.

M&L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing on old plastered surfaces of walls all as specified.

All as per ser item No 69 above but on surface of on ceiling /soffits of slabs, chajjas all as specified and as directed at site.

M & L for prepartion of newly plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint (Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and applying Two coat of synthetic enamel paint for material and labour complete.

M&L for 100 mm thick PCC in (1:2:4) type B2 using 40mm graded stone agg as in sunken floor complete all as specified and as directed

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed

M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed

M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed

M&L for polythene flim black 50 micron laid in sunken floor complete all as directed

M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 10 mm thick rendering on fair faces of brick works/Concrete surfaces finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and as directed (With using WPC of 3% of Cement) Note : WPC shall be measured and paid separatly

M&L for RCC 1:2:4 (type B0) using 12.5mm graded aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelve including sup- ports, overhangs, etc. also splays between floors and beams, etc.of rough finished of concrete complete all as specified & directed

Excavating in trenches in hard dence soil , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers in hard dense soilnot exc 25 cm all as specified and directed.

M&L for Concrete bed type C2 1:3:6 to drain pipes including packing under,and haunching against thesides of pipes after they are laid and tested; as specified and directed.

Taking down carefully existing unserviceable bitumen felt/APP Membrane including plaster (any number of layers of any thickness ) etc and removing of the rubbish to a distance not exceeding not exceeding 500m from the building and depositing where directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid including one coat of bitumin priming on plaster surfaces, including preperation and applaying two coats of Heat resisting Aluminium paint over APP Membrane complete all as apecified and directed.

Supply only integral waterproofing compound.

M & L for PCC 1:2:4 of type BO using 12.5mm grades aggregate as in padding concrete.

M & L for 10mm thick rendering in cement mortar 1:4 mixed with water proofing compound (Note : WPC compound shall be measured and paid separately)

M&L(SWG) gulley trap 100mm setting and jointing with solvent cement all as specified and directed.

S&F Grating doom 100mm dia of Stainless steel with holes for waste pipes all as specified and directed.

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S & F aluminium anodied powder coated frame ( miniumum thickness of powder coating 50 micron) for doors widnow, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing roller hinges/ pivots star making and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (For sliding window and Ventilators)

S & F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and directed by Engr -in-Charge.

Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

M & L Reinforced cement concrete type B1 1:2:4 (20 mm graded agg) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and directed.

M & L Reinforced cement concrete type B1 1:2:4 (20 mm graded agg) Beams, cantilevers, bressumm ers, lintels over 1.5m span all as specified and directed.

M & L for Reinforced cement concrete type B1 1:2:4 (20 mm graded agg) Columns, pillars, piers, posts and struts

Formwork to sides of rough finished flat surface concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte all as specified and directed.

Formwork to sides rough finished flat surface concrete of pillars, posts, struts, piers, columns and stanchions all as specified and directed.

M & L for TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Ditto, but TMT 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.

S&F mild steel as in Compound girders Fe-410-W(Gde E-250 quality A) and stanchions, lattice girders, aerialmasts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc all as specified and directed.

S&F mild steel Plates (plain or chequered) Fe-410-W(Gde E-250 quality A)channels, square cut or notched (ordinary and counter sunk) forming holes, with welded attachements attachmen all as specified and directed.

S&F Mild steel bolts exc 12 n.exc 20 dia purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long all as specified and directed.

Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire all as directed.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc all as directed.

M&L Point wiring with 1.5 sqmm copper conductor cables (multistranded), FRLSH PVC insulated, insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping unsheathed (using colour code as per IS), 1100 Volts grade in and including 3 mm thick plastic laminated sheet top cover for one light /fan/exhaust fan point controlled by one, one way 5 Amp switch with and including continuous 1.5 sqmm copper conductor (multistranded using colour code) FRLS PVC insulated and unsheathed cable as earth wire connected to earth dolly complete all as specified and directed.

(a) One light point controlled by one switch.

(b) One Exhaust/Wall mounted /Ceiling fan point controlled by one regulator/switch

(c) One 3 pin socket 5 A on same board.

(d) One socket out let 5/6 Amps on Independent board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLSH PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping unsheathed (using colour code as per IS), 1100 Volts grade in and including 3 mm thick plastic laminated sheet top cover for housing one 15 A Switch / sockets with and including continuous 2.5 sqmm copper conductor (multistranded using colour code) FRLS PVC insulated and unsheathed cable as earth wire connected to earth dolly complete all as specified and directed.

Material and labour for providing point wiring with two runs of 4 Sqmm multi stranded copper conductor FRLSH PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping unsheathed (using colour code as per IS), 1100 Volts grade in and including 3 mm thick plastic laminated sheet top cover for housing one 15 A Switch / sockets/ Industrial socket with and including continuous 4 sqmm copper conductor (multistranded using colour code) FRLSH PVC insulated and unsheathed cable as earth wire connected to earth dolly complete all as specified and directed.

S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SPN of capacity 20 Amps.including fixing concealed in wall and making good the disturbed surface complete all as directed

S & F Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping complete as directed. Note : One run of phase wire one run of Neutral wire and one run of Earth wire and one run of casing and capping shall be meassured and as one length.

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar including fixing concealed in wall including cutting chasing in stone masonary / Brick masonary and making good the disturbed surface making all nacessary incomming and out going connections using proper size copper thimbles complete all as required on site all as directed

M&L for MCB SPN 40-63 Amps C curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge.

M&L for switch piano flush type single pole one way 5/6 amps 240 volts

M&L Switch piano flush type single pole one way 15/16 amps 240 Volts.

M&L for socket 5 amps 5 pin flush type, 230 volts.

M&L for socket out let, 6 pin 5 and 15 Amps multi purpose 2 in 1 flush type, 230 volts

M&L for ceiling rose surface bakelite 3 terminals

S&F MCB SP 240 volt 6 to 32 A 'B' series complete

S&F MCB SPN 240 volt 6 to 32 A 'C' series complete

Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Taking down old light fitting along with fixture and Supply & fix LED tube light fitting comprising of 20 watt Aluminium T-8 LED tube fod with inbuilt driver and accessories, the tube rod shall have efficacy of 100 Lm/Watt, including providing prewired CRCA box type batten with holders for fixing LED Tube rod along with provision of 02 no PVC square block for fixing of the fitting with necessary screws, including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete as specified and directed.

M & L for cutting wall stone mansory wall/brick wall for exhaust fan opening, the cutting must be of suitable dimension to accommodate the exhaust fan and make good distrubed surface finish with cement plaster work. Also making of wooden frame of required size and dimension to install exhaust fan as per site condition and complete all as specified and directed by Engr-In-Charge. Note : The cost of wooden frame shall be included in the quoted rate

Taking down the existing Exhaust fan and Supply and fix exhaust fan, Heavy duty with steel body AC single Phase. 230V of size 300 mm sweep 900 RPM with blades, frame, louvers made out of aluminium shhet of 0.5 mm thick with frame, anchor fastners for mounting fan, 1.5 Sqmm 3 Core cable from Ceiling rose to fan complete all as specified and directed.

Supply & fix (in Repalcement) energy saving and environmental friendly long life LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on pole/wall with and including suitable dia size bracket as per manufacturer recommendation, bracket complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified.

M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron wire 4 mm with GI protection pipe of 15 mm medium grade 7.5 meter long, etc complete all as specified.

KSP ENTERPRISES (BID ID -3316912)

om construction (BID ID -3315047)