Water Supply pipeline

Manufacture, supply, & delivery of Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.) 75 mm dia 6.0 Kgs/cm2

Manufacture, supply, & delivery of Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.) 90 mm dia 6.0 Kgs/cm2

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in T.G. Excluding taxes.ENDCAPS

TEES Rate per Each

PIPE ENDS LONG NECK

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in T.G. Excluding taxes. OD 90 mm MS Flanges

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in T.G. Excluding taxes. OD 75 mm MS Flanges

Laying and Jointing of HDPE pipes by butt fusion welding as per IS :7634- Part-II/1975 as amended from time to time to the alignement and gradient and testing the pipeline to the requirement pressure

TBSP-I.H.1.01 75mm 3M single socket PVC/SWR Pipe-4kg/sq.cm

Arresting of leakages in HDPE Pipeline with Butt Fusion of following diameters including E/W excavation, Dewatering, Removing of mud, refilling etc as suggested by Dept. Engineer

Manufacture, Supply & Delivery of 20mm MDPE SDR-11 PN-12.5pipe conforming to ISO 4427 Part-2 (or any equivalent Bureau of Indian Standards code) of PE-80 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation to any where in Telangana but excluding GST.

Lowering, Laying, jointing of 20mm PVC/HDPE/MDPE pipes as per BIS No.7634 part-III/75 for PVC and BIS No.7634 part-II/75 for HDPEpipes including earth work excavation, testing to hydraulic testpressure including cost of water with a water lead of complete, but excluding road cutting (BT/CC) charges.Complete.

Supply of tamper proof house hold non return cum flow control valve (with all three parts made by using sold steel bars of SS316) with CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.5 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEEO manual) including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation but excluding GST.

Supply of 20mm x ½” PPR Female Threaded Adaptoptor conforming to DIN Standards 8077/8092

Supply of 20mm x ½” PPR Female Threaded Elbow conforming to DIN Standards 8077/8092 E

PP Clamp Saddle (90X3/4")shall comply with AS/NZS 4793 or relevant international standards-Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt-washer. Maximum working pressure rating of 10 bar.