Widening and Strengthening work at Khedi Tilapta to Ghodi Bachheda Road ODR in District Gautambudhnagar

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 2.03 (201)

Scarifying the existing bituminous surface to a depth of 50mm and disposal of scarified material with in all lifts and leads upto 1000 metres. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 3.15(305.4.3)

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 3.18(305)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 3.17(305)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. (Carted Lead 3.0 Km.) As per Morth Specification No. 3.16 (305)

Construction of Subgrade and Earthen Shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. (Lead 3.00 Km. ) As per Morth Specification No. 3.18(305)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 4.01

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. MORT&H Specification No.4.14 (406)

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I.

(Dense Graded Bituminous Macadam Grading II )Providing and laying dense graded bituminous macadam with higher capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder V-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 .As per Morth Specification No.5.04 complete in all respects.Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I.

Tack Coat on bituminious surfaces Providing and applying tack coat with bitumen VG-10 grade using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 5.02(503)

Providing and laying bituminous concrete (Gr-ll) with 120 TPH batch type hot mix plant using crushed aggregates from approved quarry of specified grading, premixed with bituminous binder (VG-30) @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 5.05 (507)complete in all respects. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing MORT&H Specification 601. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 6.1

Construction of un-reinforced, dowl jointed plain cement concrete pavement (M30 Grade) over a prepared sub base with approved grade cement @ 400 kg per cum, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continous operation including provision of contraction, expansion, construction and longitudional joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 6.02(602)

RCC Grade M20 using batching plant transit mixer & concrete pump. Including all taxes, neccessry centering and Shuttring, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No.13.5 E

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. .As per Morth Specification No.13.08/15.14 (2706&2200)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. .As per Morth Specification No.9.03/12.04(2100)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. .As per Morth Specification No.16.01(2504)

RCC Grade M25 using batching plant transit mixer & Concrete pump MORT&H Specification 1500,1700 & 2100 As per Morth Specification No.13.05. Including all taxes, neccessry centering and Shuttring, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORT&H Specification 1600,2200 Sr No 13.6. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I.

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications as per MORTH specification clause No. 1300 & 2100 As per Morth Specification No.13.01. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. .As per Morth Specification No.12.02/15.08(130/2200)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I. As per Morth Specification No. 12.08(1500,1700&2100)

350mm dia. NP3 type Hume Pipe. Including all taxes, material, T&P, Machinary, royalty, labour cess complete. Excluding GST as per direction of E/I.

05 years Maintenance Charge @ 2.5% Routine maintenance of road for 05 years after the completion of work vide GO No. - 17/2024 SA-113/23-1-2024-23-1099/113/2023 Dated 16.01.2024 & Latter No. 36890C/RMC/Mool-23-24, Date 17.02.2024 of ENC PWD, Lucknow Rate Excluding Cost of G.S.T. Second year Maintenance Charge @ 0.25%

Third year Maintenance Charge @ 0.50%

Fouth year Maintenance Charge @ 0.75%

Fifth year Maintenance Charge @ 1.00%

Please Enable Macros to View BoQ information