Shifting and ITC of various electrical items at TE building Lalpur, Varanasi.

Sub Head -I (Wiring) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Group A)

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

2 x 1.5 sq. mm

2 x 2.5 sq. mm

2 x 4 sq. mm

4 x 4 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

Supplying & Fixing of step type electronic fan regulator on existing switch board i/c connection, testing etc as required. (M/s Anchor or S/S make)

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

32 Amp TP&N

63 Amp TP&N

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A 16 KA

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Single pole)

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/ 32amps 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 18/20 watt LED type energy efficient batten type light fitting complete i/c connection with 0.75 Sq. mm Cu. Wire etc as required. (M/s Bajaj or S/S make)

Providing & fixing meter board of size 600mm x 450mm fabricated out of ms angle iron frame of size 25x25x3 mm thick and 9 mm thick bakelite sheet and 3 nos 100 Amp kit kat fuses and neutral link i/c painting of angle iron, grouting and making good the same complete as reqd.

Providing & fixing of 63 Amp TPN SFU with HRC fuses in sheet steel enclosure suitable for operation on 415 volts AC supply alongwith suitable size ms angle iron frame i/c earthing the body etc as reqd. (M/s L&T make FN-63 or S/S make)

Providing & fixing of 63 Amp four pole ON load changeover switch with sheet steel enclosure suitable for operation on 415 volts AC supply alongwith suitable size ms angle iron frame i/c earthing the body, painting etc as reqd. (M/s HPL/Havells or ss make)

SH-II= (Earthing and Foundation) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(02 No for neautral & 02 NO for body)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (For EI neautral)

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Earth work in excavation in foundation including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed etc as reqd.

Providing suitable PCC plinth with ratio 1-2-4,1cement-2coarse sand-4stone ballast aggregate 20 mm nominal size for installing the engine alternator set in canopy including plastering, cementing, curing and shuttering etc as required.

SH-III= (Supply of Cable i/c laying and Panel shifting work) Supply and Laying of one number PVC insulated and PVC sheathed / XLPE alluminium armoured power cable of 1.1 KV grade of 3.5 x 25 Sqmm on surface with suitable clamping etc complete as required.

Laying of one number PVC insulated and PVC sheathed / XLPE alluminium armoured power cable of 1.1 KV grade of 4x 16 Sqmm on surface with suitable clamping etc complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 16 sq. mm (28mm)

3.5 X 25 sq. mm (28mm)

Supplying and fixing of 4.5 Kg. CO2 type fire extinguisher with suitable hose pipe & horn etc complete as reqd.(M/s Minimax or SS make)(Note: Certificate of explosive deparment should be submiited.)

SH-IV=(DG Shifting and ITC work) Dismantling and shifting of existing 40 KVA E/A set without silent canopy with all accessories i.e. exhaust pipe with silencer, fuel tank, contol panel, battery from existing foundation of old TE bldg to new foundation in same compound (Approx-800 Mtr) i/c loading & unloading with the help of crain and skilled labour etc as reqd.

Installation, Testing & commissioning of 40 KVA E/A set with silent canopy with all accessories i.e fuel tank, exhaust pipe, control panel, battery, making connection of cable, earthing etc as reqd.

Servicing of 40 KVA cummins make EA set including replacement of all consumables i.e. lube oil, diesel filters, air filter, coolent etc. (Make as per recommendation of manufacturer)

Replacement of Battery 01 No for DG Sets of 130 AH (Excide or approved make)

Dismentalling,and shifting of MV cum distribution panel from old TE room to new location in same compound i/c reinstalltion of the same on existing MS channel i/c minor necessory civil work etc complete as required.

Dainting and painting of the existing panel and MS channel with enameld paint of grey colour (Double layer) etc complete as required.

Replacement of the following faulty item of the existing distribution panel

Three phase ameter--0-60 Amp Range

Three phase voltmeter-0-450 Volt Range

LED Indicator (RYB)

Toggel switch for indicator

Supplynad fixing of street light fitting LED -50 Watt on the wall with suitable size of MS pipe (Round) i/c connection with 2x1.5 Sqmm PVC flexible copper wire etc complete as required.(Havells 50 Watt Superb Street light LHEXAYP7PN6K050 or SS Make )

SH-V=Supply and lowering of pump Supply of 2.0 H.P.Capacity submersible motor pump set suitable to operate on single phase 215 volt AC supply,with head range-118-48 mtr,and delivary capacity 17-83 LPM with 16 stage pump etc complete as required (Make-KSB Model-Cora 3 AH+UMT-0(s)100 or SS make)

Supplying and fixing of direct on line motor starter suitable for operation of 2.0 H.P. submerssible pump having contactor coil 12 amp 240 volt rating and over load relay of 6-10 amp range for protection of the motor. It shall have start/stop push buttons and ampere and volt meters of suitable range i/c connection, testing etc as reqd. (KSB or SS Make)

Supply and fixing of 32 mm dia B Class GI Pipe with its complete accessories i/c socket ,making threds etc complete as required (Tata or SS Mark)

S/F of pvc insulated steel wire rope of 8 mm dia i/c nuts & bolts suitable for submersible pump set etc.as required.(Total length-80 Feet)

Supply and fixing of 2.5 Sqmm three core flat submerssible cable with the pump i/c water joint etc complete as required

Lowering of new 2 HP submersible pump in the existing borewell with all its accessories with the help of tripod, chain and pulley system i/c rent and transportation of tripod etc, testing and megaring of the pump etc. complete as required.

SH-VI=Fire Detection System S.I.T.C. of 2 Zone solid state microprocessor based Main A.F.D. panel suitable for working on 240 V AC supply/24 V DC supply and fabricated with 16swg CRCA steel sheet with louvers for ventilation, in corporating audio visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities,provision of space for 2 Nos. 07 AH battery, Battery charger trickle cum boost to take complete load of fire alarm system i/c etc as required. (M/s Agni or any BSNL approved Make)

S/Fixing of 2 Nos. sealed maintenance free batteries 12 V, 07 AH etc as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.Smoke Detector with built in LED, mounting base complete with all connection etc.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required