RENOVATION WORKS AT NATIONAL FORENSIC SCIENCE UNIVERSITY, DELHI

5 Total Amount (including GST @18%) 5,61,69,534

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

Reinforced Cement Concrete

1 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 50.00 927.25 46,362.50

2 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete above plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 2000.00 107.85 2,15,700.00

3 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural

sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.

5.33.2 All works above plinth level upto floor V level

4 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 15.00 9,860.40 1,47,906.00

5 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of SQM 40.00 104.80 4,192.00

half brick masonry.

6 6.34.2 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average Cum 10.00 8,752.55 87,525.50

compressive strength in super structure above plinth level up to floor V level in :Cement mortar 1:6

(1 cement : 6 Coarse sand)

7 6.45 Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS :12894,

in super structure above plinth upto floor V level

6.45.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) SQM 40.00 1,132.50 45,300.00

8 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3

coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

8.9.1 8mm thick

9 8.9.1.2 Granite of any colour and shade Sqm 850.00 3,617.55 30,74,917.50

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

10 8.11 Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining

(veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever

required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3

(1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including

pointing with white cement slurry admixed with pigment of matching shade, including rubbing,

curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-

8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. sqm 90.00 10,414.80 9,37,332.00

Wood and PVC Work

11 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, CUM 3.50 1,42,949.70 5,00,323.95

wrought, framed and fixed in position with 2nd class teak wood.

12 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type,

core of block board construction with frame of 1st class hard wood and well matched teak 3 ply

veneering with vertical grains or cross bands and face veneers on both faces of shutters.

13 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 150.00 3,473.85 5,21,077.50

14 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges SQM 150.00 462.35 69,352.50

of flush door shutters (over all area of door shutter to be measured)

15 9.4 Providing and fixing wooden moulded beading to door and window frames with iron screws,

plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

17 9.46 Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two

chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever

necessary complete :

18 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter EACH 480.00 228.85 1,09,848.00

bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix

(1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

19 9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.

20 NS-1 Providing and fixing Stainless-Steel Tower Bolt of 600 mm length, manufactured from 316 grade

stainless steel, having 10 mm diameter bolt rod, complete with SS body, barrel, receiver plate and

necessary stainless-steel screws. The tower bolt shall be bright finished, free from burrs, dents or

deformation, and shall operate smoothly for locking and sliding action. Fixing shall include drilling,

aligning, tightening of screws, and making good the surface wherever required. Complete as per

manufacturer’s specifications and as directed by the Engineer-in-Charge.

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

21 NS-2 Providing and fixing Stainless-Steel Tower Bolt of 300 mm length, manufactured from 316 grade

stainless steel, having 10 mm diameter bolt rod, complete with SS body, barrel, receiver plate and

necessary stainless-steel screws. The tower bolt shall be bright finished, free from burrs, dents or

deformation, and shall operate smoothly for locking and sliding action. Fixing shall include drilling,

aligning, tightening of screws, and making good the surface wherever required. Complete as per

manufacturer’s specifications and as directed by the Engineer-in-Charge.

22 9.81 Providing and fixing bright finished brass handles with screws etc. complete:

23 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having each 160.00 1,124.85 1,79,976.00

brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto

700 mm), with necessary accessories and screws etc. complete.

24 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

25 9.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade

AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.

26 9.101.1 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating

not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with

necessary screws etc. complete.

9.101.2 Twin rubber stopper each 204.00 72.35 14,759.40

27 NS-3 Providing and fixing 100 mm Stainless Steel Mortice Latch and Lock (ISI marked) each 80.00 3,750.00 3,00,000.00

Providing and fixing Stainless Steel (SS-316 grade) mortice latch and lock of size 100 mm, ISI marked,

with six-lever locking mechanism, complete with SS-316 lever handles, strike plate, face plate,

receiver, fixing screws and all necessary hardware. The mortice lock set shall be of bright/matt

stainless-steel finish, free from burrs or surface defects, ensuring smooth latch movement and

secure locking. The work includes cutting, fitting, aligning, fixing to the door shutter, checking for

smooth operation, and making good any minor surface damages.

28 9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters,

including fixing with necessary screws etc. complete.

9.114.1 Triple strip vertical type each 204.00 52.50 10,710.00

29 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

30 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, Kg 450.00 123.60 55,620.00

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

31 11.51 Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required

pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick

stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)

laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry

admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. sqm 139.28 6,603.35 9,19,698.74

32 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:

4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

33 11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of sqm -819.00 850.10 (6,96,231.90)

floor tiles and jointing with grey cement slurry

34 11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile sqm 819.00 753.25 6,16,911.75

adhesive (Water based) conforming to IS: 15477, in average 3 mm thickness

35 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of

organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including

filling / grouting and finishing complete as per direction of Engineer-in-charge.

36 11.49A Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water SQM 180.60 3,623.95 6,54,485.37

absorption less than 0.06% and conforming to IS:15622, of approved make, brand and

manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with

grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching

pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will

be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting,

leveling system and rubber mallet for placing the slab gently and easily.

Size of tile 800x2400 mm of all colours and shades.

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

37 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:

4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

38 11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent Sqm 500.00 4,481.30 22,40,650.00

39 12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor

level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with

rabbit wire mesh fixed to wooden frame (frame work to be paid separately):

40 12.32 Extra for sunk or raised mouldings in the plaster of Paris (Gypsum Sqm 100.00 607.45 60,745.00

anhydrous) ceiling.

41 12.45 GYPSUM BOARD CEILING :- Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with

6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of

10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20

mm and 30 mm long.

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

Including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the cost of making openings for light fittings,

grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete

as per drawings, specification and direction of the Engineer in Charge but excluding the cost

of painting with :

42 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 280.00 1,355.80 3,79,624.00

43 12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get

required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200

mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200

mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet

to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle

of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.

Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm

fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along

main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint,

all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.52.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm Sqm 306.37 1,902.95 5,83,010.60

thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive)

and electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending.

44 12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre Sqm 70.00 1,528.00 1,06,960.00

conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c

with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the

back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool

45 12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar sqm 680.00 1,703.95 11,58,686.00

refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped

surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse

sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including

rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm

height along the parapet walls in the same manner.

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

46 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of

47 13.4 12 mm cement plaster of mix

48 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sqm 100.00 518.11 51,811.00

coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

49 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give

an even shade :

13.62.1 Two or more coats on new work over an under coat of suitable sqm 200.00 226.25 45,250.00

shade with ordinary paint of approved brand and manufacture

50 13.116 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden

shade texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of sqm 220.00 1,360.45 2,99,299.00

2. Applying two coats of sealer with spray gun and allowing sufficient

drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to

remove excess sealer layer and make the surface further smooth after this wet rubbing, then

surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.

Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface

is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge.

(Final coat to be done in 1 or 2 layers without gap of time.)

51 13.45 Finishing walls with textured exterior paint of required shade :

52 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of Sqm 4642.12 223.60 10,37,976.91

exterior primer applied @ 2.20kg/10 sqm

53 13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per sqm 200.00 241.75 48,350.00

manufacturer’s specifications including appropriate priming coat, preparation of surface, etc.

54 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare Sqm 5342.12 262.70 14,03,373.61

the surface even and smooth complete

55 13.88 Removing white or colour wash by scrapping and sand papering and Sqm 5342.12 19.75 1,05,506.77

preparing the surface smooth including necessary repairs to scratches etc. complete

Repairs to Building

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

56 14.75 Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including SQM 250.00 670.95 1,67,737.50

cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with

white cement based polymer modified self curing mortar, including disposal of rubbish, all

complete as per the direction of Engineer-In-Charge

Dismantling and Demolishing

57 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material

and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-

15.7.4 In Cement Mortar Cum 5.00 2,060.20 10,301.00

58 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and

stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 160.00 367.20 58,752.00

59 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within

50 metres lead :

15.13.1 Of area 3 sq. metres and below each 160.00 143.50 22,960.00

60 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

61 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 300.00 73.40 22,020.00

62 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and sqm 200.00 266.45 53,290.00

disposal of unserviceable material within 50

63 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful each 80.00 112.50 9,000.00

materials near the site and disposal of

unserviceable materials within 50 metres lead.

64 NS-4 Providing and laying rubber floor tiles in different sizes (thickness to be specified by manufacturer), Sqm 80.00 4,464.73 3,57,178.42

of approved make, in all colours & shade. complete.

65 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) each 80.00 1,607.95 1,28,636.00

complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and

washers complete.

66 NS-5 Providing and fixing floor mounted, white vitreous china single piece, water closet, Rimless Bowl Each 83.00 24,500.00 20,33,500.00

With Cistern For Coupled WC With UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting With

Back Filling, Fixing Accessories, Size: 385x680×785 mm, P Trap- 180 mm including integrated white

vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures

with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the

existing P/S trap, complete in all respect as per directions of Engineer-in-Charge (Jaquar - Opal

Prime or Equivalent Brand as per List of Make)

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

67 18.8 Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot

& cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with

clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the the same including testing of joints

complete as per direction of engineer in charge.

68.0 18.8.1 15 mm nominal outer dia pipes. Metre 100.00 497.80 49,780.00

69.0 18.8.2 20 mm nominal outer dia pipes. Metre 500.00 537.60 2,68,800.00

70.0 18.8.3 25 mm nominal dia Pipes metre Metre 100.00 627.25 62,725.00

71 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per

direction of Engineer in Charge

71.1 18.9.6 50 mm nominal dia Pipes metre 120.00 794.25 95,310.00

74 NS-6 Providing and fixing uPVC 6 Kg/cm2 Soil , Waste & RWP pipes (IS: 13592 Class B) including all Metre 30.00 884.90 26,547.00

fittings (plain or door) e.g. bends, junction, cowls, offsets, access pieces, jointing with rubber

ring/solvent cement joints including cutting chase or holes in walls and floors and making good

wherever required. :75mm dia

75 18.16 Providing and fixing brass stop cock of approved quality complete.

76 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

77 18.51 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

78 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931.

79 18.53 Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality

conforming to I.S:8931 a) 15 mm nominal bore.

80 18.53a Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of each 200.00 74.80 14,960.00

approved make and quality as per direction of Engineer-in-charge

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

81 18.74 Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of

approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 100.00 121.90 12,190.00

82 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

82.1 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Kg 6500 495.05 32,17,825.00

Minimum anodic coating of grade AC 15)

21.1.2 For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket

required (Fittings shall be paid for separately)

82.2 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Kg 3500 598.60 20,95,100.00

Minimum anodic coating of grade AC 15)

83 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions

of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 410.00 1,505.25 6,17,152.50

84 NS-7 Providing and applying waterproofing treatment in bathroom/toilet with High Performance Two SQM 442.62 967.39 4,28,184.30

Component Acrylic Polymer Modified Cementitious Flexible Waterproofing Coating (such as Dr. Fixit

Fastflex or equivalent), having a film build-up of 1.2 mm to 1.5 mm and elongation up to 120%. The

Surface Preparation:

Cleaning the substrate, making it free from dust, loose particles, oils or contaminants. Damping the

surface to SSD (Saturated Surface Dry) condition before coating.

Applying waterproofing coating in two coats @ 1.0 kg/m² per coat, with a time interval of 6–8 hours

Coating to be applied on entire horizontal surface and vertical surface up to 7 ft from FFL, excluding

remaining 1 ft above shower area.

Sand Sprinkling:

After the second coat on vertical surface, sprinkle fine washed sand while the surface is still tacky,

for proper keying with screed/plaster.

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

85 NS-8 Providing & applying PU based high performance waterproofing treatment over terrace having sqm 650.00 1,806.75 11,74,387.50

pure polyurethane based, single component, low VOC, elastomeric, seamless, moisturecuring,

waterproof membrane, Dr.Fixit FlexiPU 270(I), applied in 2 coats over After carrying the necessary

preparation with roller at a total consumption of 1.5 Kgs/Sqmt, having specific gravity of

minimum1.30,havinganelongationcapacityofover400%,with tensile strength of>2.00Mpa, Adhesion

to concrete surface over 2.00 N/mm2, Shore A Hardness of 75, Fire resistance EUROClass-F, with

Anti-root propertise, with a service temperature range of-40 deg C to 80 deg C, with solids content

of around 90%, to be applied by brush/ roller over the RCC slab and on the vertical surfaces upto

300 mm above FFL , there after ponding with water for 3 days etc. complete. The work shall be

carried out all complete as per specification and the direction of

the engineer-in-charge. The work should only be carried out by the specilaised water proofing

vendor and product performance shall carry guaranteed for 10 years against any leakage

86 22.14.1 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : cum 12.50 8,042.30 1,00,528.75

4 graded stone aggregate 20 mm nominal size)

New Technologies and Materials

87 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K

value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/

wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with

miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS

screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)

& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2

and resistance to spread of flame of Class A

category with property of being termite/borer proof, water/moisture proof and fire retardant and

fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as

per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for

Note: For WPC solid door/window frames, minus 5 mm tolerance in

dimensions i.e depth and width of profile shall be acceptable. Variation in

profile dimensions on plus side shall be acceptable but no extra payment

on this account shall be made.

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

88 26.88 Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of

K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N

(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance

to spread of flame of Class A category with property of being termite/borer proof,

water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns

thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with

stainless steel butt hinges of required size with necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In- Charge.

(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

89 26.91 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) sqm 200.00 3,437.15 6,87,430.00

solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by

Engineer-in -charge which are machine cut for duct/shaft covering, partitions and

facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and

natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity

index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal

strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer

proof, water/ moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25

x 1.5 mm square hollow box section including applying a priming coat of approved steel primer,

placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel

fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge.

(Note: M.S (mild steel) framework with priming coat and necessary SS

fasteners and SS screws shall be paid separately.

90 26.6E Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming

to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood

plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and

also providing and fixing wooden moulded corner beading of triangular shape to the junction of

panelling etc. with iron screws all complete as per direction of Engineer-in-Charge.

91 NS-9 Providing & fixing RFID Card Lock on Main door - Made in India- Catus Lock. Access Modes each 27.00 19,500.00 5,26,500.00

through NFC/Bluetooth Process through Mobile app, RFID Cards working on 13.5Hz Frequency,

Storage Capacity: staff card , House Keeping Cards, Guest card up to 100. Audit trail up to 10

92 NS-10 Enocoder for Programming RFID Card nos. 1.00 22,500.00 22,500.00

93 NS-11 RFID CARD ( IN PACK OF 100 PCS) nos. 1.00 1,500.00 1,500.00

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

94 NS-12 Providing and fixing stand-alone decorative jali panels made from High-Density Fibreboard (HDF), SQM 100.00 7,000.00 7,00,000.00

executed as per approved design and finish, or as directed by the Architect/Engineer-in-Charge.

High-Density Fibreboard (HDF) with a minimum density of 725 kg/m³.Free from warps,

cracks, and surface defects Panel Dimensions: Thickness: 18 mm (or as specified)Overall panel

size: 2400X 900-1200.Pattern & Design: CNC-routed jali pattern to be provided as per the

approved design/drawing. Edges to be smoothly finished and free of chipping or burrs.

Surface Finish: Panels to be finished with Duco paint in approved shade and finish Duco application

to include Surface preparation with primer and sanding. Application of minimum two coats of

high-quality automotive-grade Duco paint Final coat to achieve a uniform, smooth, and dust-

free surface with desired sheen (matt/semi- gloss/high gloss) Installation: Panels to be

installed in a stand- alone configuration using appropriate supports such as metal framing,

wooden battens, or brackets as required. Fixing to be done with concealed fasteners or

adhesive to maintain visual integrity. Provision for expansion joints or ventilation, if required, to

be included as per design. Finishing and Approval: All edges and joints to be finished cleanly. Final

product to be free from surface imperfections such as runs, sags, or brush marks.Work to be

completed in accordance with drawings and to the satisfaction of the Engineer-in-Charge

95 NS-13 Providing and fixing factory-finished WPC charcoal fluted wall panels, including supply, SQM 300.00 1,000.00 3,00,000.00

cutting, and installation complete as per the manufacturer’s specification and Architect/

Engineer-in- Charge’s approval. Work includes: Panel Material: with integrated charcoal finish,

termite-proof, water-resistant, fire-retardant grade Panel Size: Typically 150 mm to 200 mm width

and 9 mm to 25 mm thickness (to be confirmed as per design) Finish: Pre-finished in charcoal

texture or woodgrain pattern in approved shade.Fixing over wall using recommended

GI/Aluminium framing or cleats with SS screws or adhesive. Ensuring alignment, level, and

seamless joints. Necessary cutting and edge finishing to match profiles at corners and

terminations Including corner trims, joint profiles, adhesive, screws, masking tape, etc.

96 NS-14 Providing and fixing, and installation of a glass partition system with slim aluminium perimeter SQM 50.00 7,000.00 3,50,000.00

and joint profiles (powder-coated), using clear toughened glass, complete with required

hardware, sealants, labour, and accessories. Fixed Double Glazed Unit (DGU) Partition, 5mm +

12mm Air Gap + 5mm toughened glass (Total 22mm DGU) Slim aluminium perimeter channels

(powder-coated, 25–32 mm face width). Powder-coated finish in standard RAL colour (Black /

White / Grey) Structural grade silicon (Dow Corning

/ Wacker). Fully sealed with acoustic silicon, gaskets, and edge protection. Glass. Saint-Gobain /

Asahi / Modiguard or equivalent (ISI-certified) size 3.9x2.5

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

97 NS-15 ZEBRA BLINDS- 190g/sqm, thickness - 0.50 mm - 0.70mm ( opaue part ), Colorfastness to light - SQM 26.00 4,500.00 1,17,000.00

above 4 grade. Blind tube is made of Aluminum with a diameter of 36mm, botom rail is made of

Aluminumwith powder coated having weight 390 gm/meter fitted with end caps in colour matching

to thefabric and mechanism is of plastic with chain and metal bracket. The Blinds comes with

Aluminum cover with the matching fabric designed on it.

Aluminium profile should have temper WP consisting of alloy 63400 along with anodizing of 10

micron and powder coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm

square and elongation 18.The control clutch driveunit engineered heavy duty chain drive pulley

operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and

inserted at minimum of 38mm into roller tube. It is self-lubricating Exclusive clutch with safety pins

for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most

convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley

with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear ratio

of 1.75:1 for reduced operating force on larger blinds.

98 Mounting hardware brackets universal brackets including end plug bracket with lock down retainer

device.Brackets finish of powder coated metal installation brackets made of stamped and hardened

steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP.

Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be

2mm diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or

lowering action of the shades. Plastic parts all plastic components are UV-stable compounds

available white.

99 NS-16 ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top tube of 38mm SQM 40.00 1,800.00 72,000.00

diameter, powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain.

The Roller Blind fabric should possess the below mentioned specifications with fabric made up of

85% Polyester and 15% Catonic Polyester. Roller blinds with Solar protection fabric of high tenacity

Polyester Yarn & Fungi static Treatment and should block the light flux & offer elimination of glare

and sunlight / heat radiance. Fabric shall have visible light & solar properties. 1st weave of thickness

0.32mm ±5% (ISO 2286-2) and weighing 210g/sm±5%. Flame Retardancy as per AS301.3-1999.

Fabric Protected by teflon fabric protector for water and stain resitance. Harmful substance

standard Oeko-tex standard 100. Constrruction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill).

Aluminium profile should have temper WP consisting of alloy 63400 along with anodizing of 10

micron and powder coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm

square and elongation 18.The control clutch drive unit engineered heavy duty chain drive pulley

operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and

inserted at minimum of 38mm into roller tube. It is self-lubricating Exclusive clutch with safety pins

for secure bracket installation and unlocking pin for quick manual removal.

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

Universal clutch is most convenient for large windows down to the smallest windows. It shall be

driven by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of

the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds.. Mounting

hardware brackets universal brackets including end plug bracket with lock down retainer device.

Brackets finish of powder coated metal installation brackets made of stamped and hardened steel.

Roller tube circular- shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail

flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm

diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or

lowering action of the shades. Plastic parts all plastic components are UV-stable compounds

available white.

100 NS-17 FROSTED FILM (CRYSTAL QUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs SQM 100.00 2,094.59 2,09,459.00

MCS warranty as approval of the Architect/ Engineer In Charge (Only film surface area shall be

measured and paid).

101 NS-18 Painting with acrylic emulsion paint of Stucco Marble satin finish and manufacture to give an even sqm 700.00 1,100.00 7,70,000.00

shade to wall and ceiling etc. applied evenly with roller to give approved matt or stippled finish

complete, including cleaning preparation , putting etc. over coat of cement primer of surface and

coat of approved primer as per manufacturer’s specification:Two or more coats on new work/and

old work including scraping of old paint and disposal of mulba to authorized dumping grounds.( for

old and new work including peeling/removing old paint. ) FOR ROOMS CEILING, TOILET, KITCHEN &

CORRIDOR WALLS/CEILING

102 NS-19 Provide and fixing Ractangle/Circle of (size not less than 400mmx400mm) table-top wash basin with Each 85.00 6,800.00 5,78,000.00

tap-hole (for basin mixer / pillar tap) or as per project drawings, made of vitreous-china ceramic

with anti-germ glazed surface. Basin to be counter-mounted on finished top slab, with all necessary

fixtures — waste coupling, plug, overflow (if applicable), sealing compound — including finishing,

cleaning and handing over in clean and perfect condition. Basin edges to be smooth, with thin/soft-

rim design for contemporary interior aesthetics (Jaquar Opal series or equivalent as per List of

103 NS-20 Providing and fixing Tall Body Single Lever Basin Mixer , suitable for table-top wash basin Each 85.00 9,117.34 7,74,973.90

installation, including high-quality ceramic cartridge, 600 mm braided flexible inlet connection

hoses, pop-up waste system, mounting hardware, chrome-plated brass body, aerator, and all

standard accessories as supplied by the manufacturer (Jaquar make “Opal Prime” series or

equivalent as per List of Make)

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

104 NS-21 Providing and fixing factory-made vanity cabinet of approximate size 750 × 500 mm (30" × 20") or as Each 83.00 8,800.00 7,30,400.00

per site requirement, fabricated from 18 mm thick HDHMR board of approved brand, with all

internal faces finished with 0.8 mm thick laminate and external visible surfaces finished with

premium 1.0 mm laminate / designer high-gloss laminate / PU-coated surface as approved by the

Engineer-in-Charge. The vanity shall consist of soft-closing shutter(s) mounted on auto-closing

stainless-steel hinges and internal shelves as per design.

The unit shall be supported on 4 to 6 inch high stainless-steel legs of approved design and load-

bearing capacity, fixed with stainless-steel screws/fasteners. The cabinet shall include a premium

countertop in Granite/Quartz/Engineered Stone of approved shade (minimum 18–20 mm thick),

with polished edges, cut-outs for table-top basin, mixer and waste openings, and water-resistant

silicone sealing along all joints.

The work includes providing all hardware such as SS handles, auto-hinges, fasteners, screws,

internal shelf supports, edge-banding (1 mm PVC tape on exposed edges), cut-outs, polishing, fixing,

levelling, sealing, cleaning and making the vanity fit for use, complete as per design, manufacturer’s

specifications, and directions of the Engineer-in-Charge.

105 NS-22 Providing and fixing Single Lever Concealed Diverter consisting of concealed body and exposed each 80.00 8,300.00 6,64,000.00

trim set , complete with operating lever, selector knob, wall plate, screws, gaskets and all

accessories, including fixing the concealed body in wall, cutting/chasing, connection with existing

CPVC/GI piping, making good the surface, testing and commissioning, complete as per

manufacturer’s specifications and direction of Engineer-in-Charge (Jaquar opal prime series or

equivalent as per List of make)

106 NS-23 Providing and fixing overhead rain shower Square/Circular of size 300 mm × 300 mm (Maze each 80.00 9,250.00 7,40,000.00

overhead), made of brass / stainless-steel with chrome-plated finish, ultra-thin design, silicon anti-

clog nozzles, swivel joint, including matching Jaquar shower arm of approved length and design,

fixing with all necessary fittings, jointing, testing for leak-proof performance, and handing over in

working condition, complete as per manufacturer’s specifications and directions of Engineer-in-

Charge. (Jaquar opal prime series or equivalent as per List of make)

107 NS-24 Providing and fixing Jaquar or equivalent Health Faucet / Hand-Shower set of approved make and each 83.00 2,430.00 2,01,690.00

model, comprising chrome-plated brass/ABS spray gun, 1 m flexible hose, wall hook/bracket,

washers and connection fittings, suitable for ½″ angle-valve inlet. The work shall include fixing,

sealing, testing for leak-proof performance, and handing over in proper working condition,

complete as per manufacturer’s specifications and direction of Engineer-in-Charge (Jaquar opal

prime series or equivalent as per List of make)

108 NS-25 Providing and fixing 600 mm single towel rail of stainless steel / brass with polished chrome or SS each 83.00 2,344.00 1,94,552.00

finish , wall-mounted with concealed brackets, screws, anchors, washers, and all accessories. The

work includes fixing on finished wall, ensuring alignment and level, sealing if required, cleaning after

installation, and handing over in perfect working condition, complete as per manufacturer’s

specifications and direction of Engineer-in-Charge. -Jaquar or equivalent as per List of make (Jaquar

opal prime series or equivalent as per List of make)

Digitally signed by GOUTAM

Bill of Quantity - Civil Works

S. No. DSR Item DESCRIPTION Unit Qty. RATE NS Rate AMOUNT Amount (NDSR)

No. (CIVIL WORKS) (DSR 2023) (DSR)

109 NS-26 Providing and fixing Jaquar Opal Prime Series or equivalent as per list of make Spout with Button, each 83.00 2,850.00 2,36,550.00

model of approved type, suitable for wall-mounted installation with integrated diverter/flow

control button. Spout to be manufactured from brass (as per IS: 1599 / IS: 1264) with chrome-

plated (CP) finish conforming to IS: 4827.All materials, labour, cutting, finishing, and making good of

wall surfaces where required shall be included, complete as per manufacturer’s specifications and

as directed by the Engineer-in-Charge.

110 NS-27 Providing and fixing Jaquar Opal Prime Series or equivalent as per list of make Spout with Button, meter 50.00 450.00 22,500.00

model of approved type, suitable for wall-mounted installation with integrated diverter/flow

control button. Spout to be manufactured from brass (as per IS: 1599 / IS: 1264) with chrome-

plated (CP) finish conforming to IS: 4827.All materials, labour, cutting, finishing, and making good of

wall surfaces where required shall be included, complete as per manufacturer’s specifications and

as directed by the Engineer-in-Charge. Note: Length of Railing shall be measured in meter as a

single component, multiple rail shall not be measured seperately

Cost index @ 1.03 on DSR 3,58,02,988.61

Reduce GST MF @ 0.973 as per CPWD circular dated 08.08.2024 3,48,36,307.92 1,24,29,462.13

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Electrical Works

DSR 2025 DESCRIPTION RATE Amount

NO UNIT QTY NS-RATE AMOUNT (NS)

(DSR-2025) (DSR)

SUBHEAD :1_WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

1 1.10 recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required

Wiring for circuit/ submain wiring alongwith earth wire with the following

3 1.14 sizes of FRLS PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required.

4 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (For submain wiring) Metre 70 482 33740 0

5 1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire (For submain wiring) Metre 80 813 65040 0

6 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire (For submain wiring) Metre 40 1078 43120 0

Supplying and drawing following sizes of FRLS PVC insulated copper

7 1.17 conductor, single core cable in the existing surface/ recessed steel/ PVC

conduit as reqired.

8 1.17.3 3 X 1.5 sq. mm (For circuit wiring) Metre 800 104 83200 0

9 1.17.12 3 X 2.5 sq. mm (For circuit wiring) Metre 500 148 74000 0

10 1.17.21 3 X 4.0 sq. mm (For power point wiring) Metre 300 222 66600 0

Supplying and fixing of following sizes of medium class PVC conduit along

11 1.21 with accessories in surface/recess including cutting the wall and making good

the same in case of recessed conduit as required.

Supplying and fixing modular blanking plate on the existing

modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 3 pin 5/6 A

modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A

modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as

required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16

A modular socket outlet and 15/16 A modular switch, connections etc. as

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Electrical Works

DSR 2025 DESCRIPTION RATE Amount

NO UNIT QTY NS-RATE AMOUNT (NS)

(DSR-2025) (DSR)

Supplying & fixing suitable size GI box wih modular plate and cover in front

on surface or in recess including providing and fixing 25 A modular socket

outlet and 25 A modular SP MCB, "C" curve including connections, painting

etc. as required.

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for

ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm

10.18 thick M.S. sheet with its top surface hacked for proper bonding, top lid shall

(DSR-Civil) be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round

headed screws, one lock at the corners. Clamp shall be made of 12 mm dia

M.S. bar bent to shape as per standard drawing.

SUBHEAD :2_LIGHT FITTINGS AND FANS

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all

sizes and shapes containing upto two GLS/CFL/LED lamps per fitting,

complete with all accessories including connections etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,

BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper winding, Power factor not less

than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum

20 9.1.3 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than Each 6 2882 17292 0

10%, remote or electronic regulator unit for speed control and all remaining

accessories including safety pin, nut bolts, washers, temperature rise=75

degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230

V, 50 Hz, single phase AC , earthing etc. complete as required

Supply Installation & Testingof Flexiible LED strips with optimum

brightness & uniformity of light for perfect cove lighting complete with all

21 MR fixing accessories as required. Of havells ref. cat. Each 84 1185 0 99517.32

FLEXISTRIP5MIP2024V/2ALED865MOD V1+CVDRIVER24V2A or

apporoved equivalent.

Supply of 18W LED, Recessed mounted Downlight with Low depth

Aluminium (99% Purity) Heat Sink, available in Round and

Square shape. PC diffuser in white powder coated finish with independent

22 MR electronic low THD (<10%) LED driver with higher design life class, Each 350 1429 0 500025.75

complete with all fixing accessories as required of Cate. Ref. HAVELLS :

INTEGRAPLUSDLSQ18WLED865 or apporoved equivalent.

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Electrical Works

DSR 2025 DESCRIPTION RATE Amount

NO UNIT QTY NS-RATE AMOUNT (NS)

(DSR-2025) (DSR)

Supply of 5W LED Single Head Wall (Mirror) Light with integrated

electronic driver etc,complete with all fixing accessories as required of Cate.

23 MR Ref. PHILIPS : 582004 Artizy 5W IP44 Round Wall light or apporoved Each 5 3721 0 18607.23

Supply of 25W LED UP DOWN Luminiare, Environmental friendly, new

generation, energy saving, decorative IP 66 LED UP-down Luminaire with

24 MR wall surface mounting, complete with all fixing accessories as required of Each 65 7317 0 475634.25

Cate. Ref. HAVELLS : CLIOWLS25WLED830PSYMTOTG or apporoved

SUBHEAD :3_MCB ,DB'S

Supplying and fixing following way, horizontal type three pole and neutral,

sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with

25 2.4 tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper bus

28 2.3 bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator

29 2.3.1 6 way, Double door Each 1 2390 2390 0

30 2.3.4 16 way, Double door Each 2 3367 6734 0

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning etc.

Supplying and fixing following rating, four pole, 415 V, isolator in the

33 2.13 existing MCB DB complete with connections, testing and commissioning etc.

Supplying and fixing following rating, double pole, 230 V, isolator in the

35 2.12 existing MCB DB complete with connections, testing and commissioning etc.

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Electrical Works

DSR 2025 DESCRIPTION RATE Amount

NO UNIT QTY NS-RATE AMOUNT (NS)

(DSR-2025) (DSR)

Supplying and fixing following rating,four pole, (three phase and neutral),

415 volts, residual current circuit breaker (RCCB), having a sensitivity

current 30 mA in the existing MCB DB complete with connections, testing

and commissioning etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for

following triple pole and neutral, sheet steel, MCB distribution

board, 415 Volts, on surface/ recess, complete with testing and

commissioning etc.as required.

40 2.24.2 For 6 way, Double door TPN MCBDB Each 1 1223 1223 0

41 2.24.3 For 8 way, Double door TPN MCBDB Each 2 1448 2896 0

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following

single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on

surface/ recess, complete with testing and commissioning etc.as required.

43 2.23.1 For 6 way, Double door SPN MCBDB Each 1 834 834 0

44 2.23.4 For 14 way, Double door SPN MCBDB Each 2 990 1980 0

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required

TOTAL OF ELECTRICAL WORKS 1642844.9 1093784.55

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Furniture Work

Rate Amount in

Sr.no Specification Qty Unit Reference Image

1 Dining table (6 seater) 6 Set 1,98,186 11,89,116

Supplying & placing in position of 6 seater dining table set as per image. Contemporary and

luxurious, dt set showcases its white marble top accentuated by distinctive veins perching on

metal tapered legs with golden foot caps. Paired with barrel back chairs wrapped in sumptuous

leatherette, Includes: a rectangular dining table and six dining chairs.Tabletop features

premium marble finish with distinctive veins and patterns.

Legs crafted of black finished metal with gold-toned foot caps.Premium leatherette upholstery

in dual-tone feels soft and sumptuous.Chairs feature barrel-curved back for an enveloping

comfort.Decorative stitch details on the chair back make it a statement piece.Material &

SubtypeMetal - Iron, Premium Leatherette, Marble - Composite, Stone Type:Marble -

Composite, Table Top Material:Marble - Composite

Table Leg Material:Metal, Chair Leg Material:Metal, Chair Frame Material:Metal,Frame 0

Upholstery MaterialPremium Leatherette, Seat Material:Premium Leatherette, Leg

FinishMatte, Colour & Colour FamilyWhite - Pearl, Brown - Almond, Beige - Cream

Dimension Of Table:(W)1755mm X (D)800mm X (H)740mm, Dimension Of Chair:(W)500mm X

(D)520mm X (H)905mm. The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product

should be as per above given specification under the guidance of project architect & Engineer

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Furniture Work

Rate Amount in

Sr.no Specification Qty Unit Reference Image

2 Dining table (4 seater) 2 Set 1,47,111 2,94,222

Supplying & placing in position of 4 seater dining table set as per image. Contemporary and

luxurious, dt set showcases its white marble top accentuated by distinctive veins perching on

metal tapered legs with golden foot caps. Paired with barrel back chairs wrapped in sumptuous

leatherette, Includes: a rectangular dining table and dining chairs.Tabletop features premium

marble finish with distinctive veins and patterns.

Legs crafted of black finished metal with gold-toned foot caps.Premium leatherette upholstery

in dual-tone feels soft and sumptuous.Chairs feature barrel-curved back for an enveloping

comfort.Decorative stitch details on the chair back make it a statement piece.Material &

SubtypeMetal - Iron, Premium Leatherette, Marble - Composite, Stone Type:Marble -

Composite, Table Top Material:Marble - Composite 0

Table Leg Material:Metal, Chair Leg Material:Metal, Chair Frame Material:Metal,Frame

Material:Metal Upholstery MaterialPremium Leatherette, Seat Material:Premium Leatherette,

Leg Material Metal FinishMatte, Colour & Colour FamilyWhite - Pearl, Brown - Almond, Beige

- Cream, Dimension Of Table:(W)1300mm X (D)800mm X (H)740mm, Dimension Of

Chair:(W)500mm X (D)520mm X (H)905mm. The product should be from manufacturer(OEM)

which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO

Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC

Certification. The product should be as per above given specification under the guidance of

project architect & Engineer in charge.

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Furniture Work

Rate Amount in

Sr.no Specification Qty Unit Reference Image

3 seaterDimension(W)1905mm X (D)890mm X (H)870mm 6 no 88,346 5,30,074

2 seater Dimension:(W)1410mm X (D)890mm X (H)870mm 6 nos 70,006 4,20,036

Supplying, and placing in position of sofa as per Image .classic Contemporary design and

slender curves. . The Sofa of stands Firm on solid PVC legs with thick armrests that are slightly

curved on the front face of the sofa. Each curve defines a seating space which provides for

people to be seated comfortably. Finished in a Leatherette, the sofa makes a fantastic first

impression. The Cushioning is moulded such that it flows along the partition for a clean unified

look. steam beech solid wood have used for framing construction of sofa The seat cushion is

made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75

inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . 0

The backrest has a foam of 28kg/m3 with polyester poly fill outer layer of 200 gsm. The

polyester poly fill keeps the upholstery wrinkle free & soft. The product should be from

manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product

should be as per above given specification under the guidance of project architect & Engineer

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Furniture Work

Rate Amount in

Sr.no Specification Qty Unit Reference Image

4 Centre Table 0

Dimension:(W)1200mm X (D)600mm X (H)460mm 6 nos 36,088 2,16,526

Supplying, and placing in position of center table as per photograph. the ct collection is

destined to become a

centerpiece of your modern Indian homes. Perching on solid wood trestle legs, the veneer

tabletop is tastefully adorned with brick pattern, crafted to perfection by skilled Marquetry

artisans.Tabletop crafted of premium engineered wood wrapped in Steam Beech veneer in

Wenge finish.Veneer features brick patterns, masterfully crafted by skilled Marquetry

artisans.Legs are crafted of kiln-dried solid wood for added durability.Material & Subtype 0

Veneer,Solid Wood - Steam Beech Wood, Table Top Thickness 36mm,Colour & Colour Family

Brown -Wenge. The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product

should be as per above given specification under the guidance of project architect & Engineer

5 Side Table 0

Dimension:(W)650mm X (D)500mm X (H)460mm 6 nos 23,467 1,40,801

Supplying and placing in position of Side table as per image., the collection is destined to

become a centerpiece of your modern Indian homes. Perching on solid wood trestle legs, the

veneer tabletop is tastefully adorned with a brick pattern, crafted to perfection by skilled

Marquetry artisan Material & Subtype:Veneer/Solid Wood - Steam Beech Wood,Leg

Material:Solid Wood, Finish:Matte Colour & Colour FamilyBrown - Wenge. The product should

be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product

should be as per above given specification under the guidance of project architect & Engineer

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Furniture Work

Rate Amount in

Sr.no Specification Qty Unit Reference Image

6 Study table 0

Dimesnion:900mm(L)x 600mm(D)x 750mm(H) 80 nos 23,861 19,08,896

Supplying and placing in position of office desk structure of rectangular shape as per image

.Primary work surface table top are made of 18mm thick prelaminated particle board with the

exposed edges shall be finished with 2mm thick edge banding tape of matching colour and

shade with the hot melt glue . Modesty panel are made of 18mm thick understructure made of

18mm thick. Construction below table top right side on 1 drawer with lock right & left side

table top based on an 18mm thick side panel.1 drawer, in provided with lock for security and

handles are provided for easy of opening. Overall construction of pedestal is 18 mm along with

facia of drawers.The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product

should be as per above given specification under the guidance of project architect & Engineer

Digitally signed by GOUTAM

Name of Work: Renovation of Guest House of National Forensic science University at its Delhi Campus

Bill of Quantity - Furniture Work

Rate Amount in

Sr.no Specification Qty Unit Reference Image

7 Study Chair 80 nos 16,713 13,37,016

Supplying and placing in position of medium back 360° degree revolving chair all over size is:

610mm (l) x 470mm (d) x 1040mm (h) as per image. The chair made of full mesh in black colour

.it will comes in matte finish in contemporary style. Arms: armrest is having two adjustment

heights (up & down).use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for

seat).seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best

quality cushioning in seat , back : frame of design shall be curved made of two pieces injection

moulded frame cover with mesh .backrest support adjustable lumbar support, mechanism: self

weighted multi locking mechanism, gas lift 100 mm telescopic haudraulic base: 650 mm

chrome base with smooth castors .The product should be from manufacturer(OEM) which have

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product

should be as per above given specification under the guidance of project architect & Engineer

11 Service counter L- shape 0

Dimension: 2500mm(L) X 3200mm(L) x 600mm(D) x 750mm(H) 1 nos 1,30,448 1,30,448

Supplying, and placing in position of medium height storage @ 750mm height as per

photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular

storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the

sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board

while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided

with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles 0

& locking arrangement.The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA

Certification, BIFMA LEVEL-1 Certification, GRIHA Certification, FSC Certification. The product

should be as per above given specification under the guidance of project architect & Engineer

Total 61,67,134

Digitally signed by GOUTAM