SPECIAL REPAIRS TO BLDG NO T-190(OR LIVING) AT ZAKHAMA MILITARY STATION

Amount

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.Including Brushing neat cement slurry with 3.0kg of cement per sq. metre Complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying under floor finishes,complete all as specified and directed.

M&L for non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to coloured tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement as in backing coat complete all as specified and as directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed..

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. and removing debries outside MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.complete all as specified & directed

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing even and smooth without using extra cement.complete all as specified & directed

M & L for 75 mm thick cement concrete (1:3:6) type C-2, (using 40mm graded stone aggregates) as in plinth protection finished fair and even with out using extra cement. complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering.complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets.complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. Exc. 1.5 Sqm each. complete all as specified and as directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each,complete all as specified and as directed.

S&F 35mm thick II nd class hard wood panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board medium density, wood particle board with commercial face vineers.complete as specified and directed

S & F 100mm size Butt hinges medium weight cold rolled mild steel and fixed,complete all as specified and as directed.

S &F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed.complete all as specified and as directed.

S & F 140mm long floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor, Complete all as specified and directed.

S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed.complete all as specified and as directed.

S&F 150mm size.extruded aluminium alloy handles, fabricated type, anodised.complete all as specified and as directed.

M&L for 2nd class hard wood. wrought in scantling and fixed, complete all as specified and as directed.

Supply and fix aluminium aniodised grills with aperture size 100mm x 100mm fabricated to the pattern as directed by Engr-in Charge made out of 6mm x 3mm aluminium anodised flat and riveted at junctions, complete all as specified and as directed

S & F fixed in repairs aluminium anodised powder coating three track sliding window shutters with franme including all necessary jointing cleats, hold fasts, rubber gasket, snap beading and locking arragement etc complete and glazing with 5mm thick tinted glass to aluminium frame work using rubber gasket and wire mesh stainless steel 0.36 mm nominal dia and average width of perture 1.4mm fitted with screws and washers etc The section of frame and shutters is as under (A) Section for shutters (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock section 39 x 20 x 1.50mm thick (iii)'Edge & bottom section 41 x 20 x1.50 mm thick (B) Section for frame (i) Top & side 123 x 29.70 x 1.50 mm not less than 1.30 Kg/RM (ii) Bottom 123 x 29.70 x 1.50mm not less than 1.502 Kg/RM Make : Jindal or equivalent section of Hindalco

M&L for 4mm thick plywood, grade BWR,type BB, fixed with nails to timber frame work complete all as specified and directed.

S&F 0.63 mm thick Galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type /J-typer or cranked hook bolts and washers, in roofs, etc with zinc coating 275 grade ,complete all as specified and directed.

Labour only for refixing 0.63 mm thick Galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type , J-typer or cranked hook bolts and washers, in roofs, etc ,complete all as specified and directed. Note :New L-type/J-typer or cranked hook bolts and washers required shall deemed to be includede in quoted rates

S&F 0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with Zinc coating 275 Grade complete all as specified and directed.

M&L for non asbestos fibrre cement building boards 4mm thick fixed/ inserted to GI frame work. complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete including hangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed

S&F hangers 6mm dia GI(upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasterners 12.5mm dia 40 mm long complete all as specified and directed.

M&L for chequered cement concrete tile 20CM x 20CM x 19 to 20 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry over screed bed or bedding layer , complete all as specified and directed.

M&L for preparation of new undecorated surfaces of wood/ceiling by brooming down and scraping where ever necessary and applying two oil emulsion distemper white or tinted all complete as specified and directed

M&L for preparation of new painted surfaces of steel and iron work of any description over 10 cmwidth or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paiint complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified and directed

M&L for preparation of old painted wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes .complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed multistranded copper conductor FRLS cable of size 1.5 Sqmm nominal area 1100 volt grade drawn through and including PVC casing-capping/conduit of suitable size with all fittings and accessories including PVC board with cover of suitable size for housing/mounting the switches/socket etc including 1.5 Sqmm PVC insulated unsheathed single core copper conductor as earth continuty wire connected to common earth dolly for one light/exhaust fan point control by one switch.one way compleate all as specified and directed.

All as per item No 35 here- in- above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

All as per item No 35 above but for 3 pin, 5 Amp Socket on the same board.

All as per item No 35 above but for 3 pin,5 Amp Socket on independent board

S&F switch piano flush button single pole one way 5 Amp.complete all as specified and as directed.

S&F switch socket combination 2 in 1, 3 pin 05 Amp flush type universal. complete all as specified and as directed.

S&F switch socket combination 5 Pin, 16 Amp flush type.complete all as specified and as directed.

S&F LED bulk head luminaires 10 W 6000k Endura Rugby Neo N -IP-65 environmental friendly ultra modern energy saving, surface mounted, decorative oval bulk head edge-lit comprising of high brightness LEDs complete all as specified and as directed. Make-Havells Cat No RUGBYNEONFT10WLED860SSYMTOP or eqvt make of Bajajaj/Philips

S&F ceiling rose surface back light 65 x 25mm, two to three terminal.complete all as specified and as directed.

M&L Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Lumino LED lamps 10W E27WW Ball lamp lumen output 1020 Im 3000K color temp current 0.055 amps complete all as specified and as directed. Make - Havells ordering code LHLDERHEMD8X010 or eqvt make of philips, bajaj

Taking down old unserviceable light fitting of any type any rating and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes .complete all as specified and as directed.

S&F MAXOLED batten with Maxo LED type 20WLED 6000K T8 LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient, 230V. 50Hz complete all as specified and directed. Make-Havells Tube cat part -LHLDEFXD5L8R020 & batten cat No LHFXCEP1TNNW020 or eqvt make of philips, Bajaj.

Taking down old unserviceable DB/Main switchs incl MCBs wooden block of any size and type and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes .complete all as specified and as directed.

S&F PVC rectangular block of size 250x200x50mm depth, complete all as specified and as directed.

S&F PVC rectangular block of size 100x100x50mm depth complete all as specified and as directed.

S&F sheet metal enclosure for DB when MCB to be used 8 way 200 amp rated bus bar, SPN 240V, double door complete all as specified and directed..

S&F sheet metal enclosure for DB when MCB to be used 2 way 200 amp rated with out bus bar, SPN 240V, single door complete all as specified and directed..

S&F 32 amps, 240 V Isoltar DP complete all as specified and directed.

S&F MCB Single pole and nuetral 240 Volts 32 Amps,c-series,complete all as specified and directed.. Make -havells, cat No DHMGCSPF006-032

S&F MCB Single pole 240 Volts 5 to 32 Amps,c-series,complete all as specified and directed.. Make -havells, cat No DHMGCSPF006-032

Taking down the existing unserviceable sub main wiring/Under ground cable of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes .complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor surved with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or rouind or 16 sq mm cable.

M & L for Sub main wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid 20 mm PVC rigid , ISI marked and its accessories duly PVC conduit concealed in wall/ roof / floor including cutting chases and finishing properly matching with surroundungs one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/ main board complete all as specified and as directed.

Dismantling house service brackets, any type and decription as existing at site including making good the disturbed surfaces to match with the existing finishes .complete all as specified and as directed.

S&F House service bracket (Hook type) complete with 3.0 meter long GI pipe 40 mm dia Med grade, two Nos 90 degree bends, MS hooks and stay or guy..complete all as specified and as directed.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00mm dia by means of nuts, bolts, check nuts & washers made of galvanized iron or steel and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cmx30cmx10cm with one handle for lifting made out of 8mm dia MS bar, watering pipe 20mm bore galvanized iron pipe (medium grade) with MS funnel for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 3 of MES Sch Pt-I including taking down the existing,complete all as specified and directed.

M/S RAHUL TRADING CO.

Rameshwar Prasad