WC-002/2022-2023 SIVNTHIPATTI FEEDER R/SVKM

Amount

Excavation of Stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit upto 8 mtr PSC poles by using JCB or manual

Excavation of pole pit upto 9.14 mtr Pole by using JCB or manual

Excavation of RSJ pole pit above 36' by using JCB or manual

Erection of 8 mtr PSC poles by using JCB or maual

Erection of 9 mtr PSC poles by using JCB or maual

Erection of RSJ Rail, fabricated poles above 36'-0' by using JCB or maual

Erection of stay set complete

Fixing of 3.6" "V" cross arms(all types) / channel cross arms/ guarding Cross arms

Tapping X arm

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Fixing of pin Insulators with Pin 11 KV

Fixing of 11 KV strain disc.

Fixing of LT pin Insulator with pin

Fixing of LT shackle

Fixing of Aluminium Knob

Painting and numbering of poles

Earthing of pole with pin including burying looping and binding

Paving of Conductor, stringing, binding Jumpering etc., complete with 7/4.09ACSR for both HT/LT lines with LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with 7/4.09ACSR for both HT/LT lines without LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/3.35 mm ACSR for both HT/LT lines with LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/3.35 mm ACSR for both HT/LT lines without LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/2.59 mm ACSR for both HT/LT lines with LC work.

Paving of Conductor, stringing, binding Jumpering etc., complete with7/2.59 mm ACSR for both HT/LT lines without LC work.

Concreting of Poles as per Board standards (2*2*5). The material such as sand, jelly, etc., have to be supplied by contractor including Cement supplied by Contractor (Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour Charges for placing Transporting of Sand, jally, from box and water curing etc,. complete as per field Engineer's instructions.

Erection of Single Pole Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

Erection of Single Pole Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

Flat guarding arrangement 4wire

Transport of poles/Materials/ conductors and other materials from store to site ( for Hired Vehicle) upto 20KM

Loading/Unloading of poles upto 8 mtr PSC poles

Loading/Unloading of poles upto 9 mtr PSC poles & RCC Square Pole

Loading/Unloading of poles above 42'-0' RSJ pole

Transporting of 8mt poles from road site to pole pit including loading and unloading of poles by using JCB or manual

Transporting of 9.0mt poles & 9.0mt RCC Square Pole from road site to pole pit including loading and unloading of poles by using JCB or manual

Transporting of poles above 42'-0' RSJ polefrom road site to pole pit including loading and unloading of poles by using JCB or manual

Loading or unloading of Transformer upto 63 KVA for each

Loading or unloading of Transformer upto 25 KVA for each

Transporting of Distribtion Transformer upto 20 KM

Erection of 63 KVA New Transformer

Erection of New Transformer upto 25 KVA

Erection of D.P. structure with AB switch top channel, cross bracing, HG fuse set, earthing, painting, providing stay and pole concreting as per field Engineer's instructions.

Alteration of Back clamp

Aluminium painting including labour,materials,lead,lift etc., for all types of x arm/channel/clamps/Bolt & Nut Etc., for above works

11KV BAY EXTENSION WORKS (1 No Splitup details given from Sl.No:48 to 63)

VCB PLINTH ERECTION WORKS

Earthwork excavating, depositing on bank with an initial lead of 10 m and lift of 2 m in medium rock and dense medium rock not requiring blasting

PCC 1:3:6 using 20 mm HBS jelly including cost of all materials, lead, lift, etc., complete without form work.

PCC 1:3:6 using 20 mm HBS jelly including cost of all materials, lead, lift, etc., complete with form work.

Plastering with CM 1:5, 12 mm thick including cost of all materials, lead, lift, curing etc., complete

Labour charges for painting the plinths Providing two coats of ready mixed Exterior Emulsion painting of approved colour & quality on outer walls over one coat of white cement primer,including cost of all materials, scaffolding charges, labours, lead, lift, etc. complete.- to be done by contractor)

Labour Charges for providing grouting pocket, placing the template for breaker foundation as per the drawing, grouting the foundation bolt as per the instruction of the site engineer including the cost of curing, T&Ps etc., complete

Labour for Erection of 33/22/11 KV breaker with own crane arrangement and connecting link rod, SF6 gas filling and other consumables including support poles cutting, jointing, providing holes and bending of pipes whereever required and as directed by the field engineer

Labour for erection of 11KV/33KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer.

Labour for erection of LAS Distribution type single pole stack 33 KV /11KV including fabrication of base if required

Labour for erection of 33/22/11 KV Measurement Transformer using manual labour or crane own arrangement (one S Ph or 3 Ph unit ) including providing holes wherever required as directed by the field engineer.

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.

Labour for erection of Busbar including fabrication and any modification of end clamp wherever necessary and as directed by the field engineer. Using 50mm bus bar of length (without making bends)

Erection of Simplex Panel including alignment and earthing as directed by field engineer

Labour for laying of cable in duct/trunch including the cost of Alu.tag for identification.Upto 8 core

Labour Charges for VCB , CT,AB SWITCH & Panel Erthing works

Labour for providing New Bay Channel extension works including Double coating Aluminium painting of Iron parts

UG Cable

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder