REPAIR/RESURFACING OF CERTAIN ROADS IN MIRAN SAHIB UNDER GE JAMMU

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 Sqm & depth exc 50mm but not exceeding 100mm deep and removal of retrieved material from site to a distance not exceeding 50m complete all as specified and as directed.

Rolling and consolidation formation surfaces in cutting through power roller of capacity exc 8 ton but not exceeding 12 ton complete all as specified and as directed.

7.5 cm (compacted thickness) WBM with coarse aggregate of grading 2 (63 to 40mm size) of granite, trap or basalt spread, rolled and consolidated to required gradient and camber complete all as specified and as directed.

Preparing Un - surfaced WBM surface by brushing with wire brushes for removing caked mud etc sweeping with broom and and finally fanning the cleaned surface with gunny bags to remove all loose dirt/ dust etc and applying evenly a priming / tack coat with bitumenous primer using paving bitumen VG 10 @ 10Kg /10 sqm complete all as specified and as directed.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and and finally fanning the cleaned surface with gunny bags to remove all loose dirt/ dust etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG 10 @ 5Kg /10 sqm complete all as specified and as directed.

30 mm thick consolidated thickness bituminous premix semi dense asphaltic concrete with 5.50 % binder content (bitumen of grade VG-30) by weight of total mix,laid by mechanical paver,rolled and compactad to required camber and gradient complete all as specified and as directed.

Premix bituminous macadam laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) by using paving bitumen, any penetration @ 4 % by weight of total mix complete all as specified and as directed.

Retro reflective, double sided road signboards comprising of 4mm thick aluminum composite panel (ACP) sandwiched with 0.5mm thick aluminium sheet on both side, factory finished or PDVF coated as base board, micro prismatic retro reflective sheet and electro cut coloured overlay film, ACP sheet shall be routed, folded and fixed to frame with 24mm wide and 2.3mm thick VHB tape provided all around the frame including riveting at right angle face of the frame with POP riveting or with self taping stainless steel screws 5mm dia, spaced not more than 300mm center to center ensuring that no riveting is seen on either face of the frame, micro prismatic retro reflective sheet conforming to Type-XI of IRC:67:2012 shall be pressure fixed as background sheet on both side of ACP, which will be over laid with electro cut transparent film of approved make and colour to create a desired name information message fixed to existing statinless steel frame complete all as specified and as directed.

Solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed.

Cat eye solar reflective type of metal body alloy of size 100mm x 100 mm x 20 mm with PAMA striplens reflector of model no DA 972.0 Dark eye or equivalent in Greenlie/Oscar/Siner infrastructure/ 3 M fixed with and incl MS stud of suitable size as per manufactures instruction complete all as specified and as directed.

Preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed.

Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed.

Providing 75 mm thick plain cement concrete 1:4:8 mix, type D-2 (Using 40mm graded crushed stone aggregate) as sub-base floor complete all as specified and as directed.

Providing, cement concrete Type B1, 1:2:4 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

s s construction (BID ID -3367379)

AHMED CONSTRUCTIONS AND INFRA PVT LTD (BID ID -3367813)

M/S VED PAUL MAHAJAN (BID ID -3362387)

CCC (CHOUDHARY CONSTRUCTION COMPANY) (BID ID -3366432)

M/S SAINT SOLDIER ENGINEERS & CONTRACTORS PVT LTD (BID ID -3375851)