Renovation Work for Office of Project Monitoring Unit PMU At Room Number 115 1st Floor Khanij Bhawan Jaipur

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead with cement mortar 1 :4 (1 cement: 4 coarse sand) and repair of floor

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including preparation of base with primer, putty, lippy etc complete in all respect.

Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved make with fibre base using rubber base adhesives including rolling with light wooden roller complete :1.5 mm thick

Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith 6mm thick plain float glass.

Providing and fixing Zebra blinds:- Supply & fixing in position of vista or equivalent dim out zebra blinds roller tube made of aodized aluminium alloy extruded upto 40mm outside diameter weight upto 220gms/running mtr. Heavy control unit made of high strength reinforced plastic with warp spring clutch heavy high carbon steel spring for transmitting from the mechanism. idler of high strength reinforced plastic, consisting of outside sleeve and centre shaft bottom rail made of high strength aluminium alloy extruded tube powder coated with valance rail and ceiling rail covered with cap including ceiling blackout designed shade of fabric provide by the manufacture complete in all respects as directed by the Engineer-in-charge.

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FRLS PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface/ recessed ISI marked MMS ( IS:9537 P-III) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc. as required. On board

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. 20 mm

Supplying and drawing FR PVC insulated & unsheathed flexible copper FRLS conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 2.5 sq. mm. + 1x1.5sqmm

(do) 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.

Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/armoured telephone cable with 0.5 mm dia. Tinned/annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping. Unarmoured Telephone cable in existing surface or recessed conduit/casing capping 3 pair

P & F following modular accessories made out of unbreakable and fire-retardant poly carbonate with silver contacts including making connections testing etc. as required. 6 A one way switch

(do)6 A 3 pin shuttered socket

(do)16 A one way switch

16 A 6 pin shuttered socket

20 Amp Socket With Mini MCB Modular Box For Ac

P & F following size mounting grid plates with cover plates: 8 Module

RJ-11 telephone jack single two line

RJ-45 computer jack with shutter

P & F Swing 300mm Wall Mounted Fan High-Performance, Wall Fan, Smooth Oscillation, 100% Copper Motor, 3-Speed Control with regulator

P & F of IP20 LED ceiling / recessed / suspended mounting light fixture made from CRCA sheet steel housing, high purity / transmissivity diffuser for uniform light distribution. High efficiency driver electronics having efficiency > 85% and in compliance to IEC standards (Integral with light fixture). Power Consumption of 40W / 50W / 60W ~ 3000/3300/4200 lumens, System lumen efficacy of 70 - 80 lm/Watt output suitable for 2x36WFTL / 2x36W CFL / 3x36W CFL light fixtures, life time of 50,000 burning hours with 70% initial lumens maintained. CCT 3000°K, 4000°K & 6000°K. Fixtures shall be CE compliance. Recessed Mounting; 36W LED light fixture 2'x2' with acrylic / prismatic front cover.

P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. Power Consumption of ≤ 7W/ 10W / 15W / 18W with ~ 500 / 750 / 1100 / 1250 lumens, System Lumen efficacy of 70 lm / watt output suitable to replace 1x18W / 2x18W / 2x 26W CFL Downlights, life time of 50000 Burning Hours with 70% of initial Lumen maintained. CCT 3000°K , 4000°K & 6000°K. Fixture shall be CE compliance. Recessed Mounting. LED Downlight 9/10W

P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCB/RCCB and SP/TP MCB as outgoing, phosphatized, powder painted complete with insulated suitable rating copper bus bar, neutral link, earth link and din bar, masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs, testing etc. as required. Double door 3 Way TPN

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. Single pole MCB 6 A to 32 A rating

Double pole MCB 6 A to 32 A rating

Single pole & neutral MCB 6 A to 32 A rating

40 A 63 A rating

Structured Cabling Works: Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest amendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required

Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest amendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessary connections as required

Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mm X 86mm Single Aperture

(do) Dual Aperture

Supply, Installation and Testing of 4 pair , 100 Ohm, 24 AWG, Cat 6 UTP, flexible, Double ended Patch Cords along with 2 No of RJ 45 connectors with strain relief transparent boots as per TIA /EIA 568 B.2-1 Specifications.1 Mtr/3 ft

16 Port Switch-POE All Giga Points 24x10/100/1000 Mbps

Rack for LAN work

Air-Conditioning Works: SITC of Air Cooled split type Air conditioners complete with Indoor unit(IDU), Outdoor unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 4 Mtr (IDU to ODU), R-32/R-410 Refrigerant, Remote, suitable for 400/230V +10% of 50 Hz ,1 /3 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor as specified. Hi Wall/Ceiling Wall Split 1.7/1.8 TR with 5-star rating of BEE

S & F of rigid CPVC (20mm) drain piping of 6 kg/ cm2 with 6mm thick nitrile rubber insulation

Making hole in stone masonry/ RCC with core cutter for accommodating refrigerant pipe/ drain pipe for split/ cassette/ duct able AC :50mm to 150mm

Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC.

Furniture Works: Corner Workstations as per detailed specifications of size 6' x 4'5'' x 2'3''

Workstations as per detailed specifications of size 5' x 2' 3''

Work stations as per detailed specifications of size 4' 5'' x 4' 5'' x 2' 3''

Work stations as per detailed specifications of size 4' x 2'3''

3 Drawer Unit as per detailed specifications of size 2' x 1' 6''

Printer Table/Drawer unit Unit as per detailed specifications of size 2' x 2' 3'' x2 '6''

Filing wooden cabinets as per detailed specifications of size 4' x 1' 6'' x 4' 6''

Revolving Mid back Chairs as per detailed specifications