REPLACEMENT OF AC SHEET WOODEN TRUSS REPAIR TO ROOF SUNKEN TREATMENT AND CONNECTED ITEMS IN 1 WEC URI ENCLAVE AND B SQN 61 CAV IN THE AREA OF AGE B/R-I UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete.

M&L rendering 10mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge.

M&L 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement.

M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed by Engineer-in-charge.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of weather proofing exterior emulsion paint (Apex ultima Luxury emulsion ) of asian or equivalent by spray gun / spray machine as per approved make list in particular specification incl one coat of primer/putty up to 4 story bldg complete all as spd and as directed. Note : Rate quated up to G+3 Bldg including scoffolding.

Dismantling of timber scantling,fillets, rail,post,rafter, purlin,etc under 40sq cm complete all as specified.

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A)

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer all as specified and directed.

Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) all as specified and directed.

Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting point all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as spd & directed.

M&L for rendering 10-15mm thick in CM 1:4 on fair faces of r concrete surfaces with using WPC compound @2%of cement weight finished even and smooth without using extra cement complete.

M&l for Cleaning the entire area first by broom, chipping unwanted area using chisel and hammer, cleaning/ smoothening by wire brush, washing the entire surface using waterjet and finally by broom and airjet and Applying one layer of cement and Nushar make CCP mix in the ratio Cement:CCP:Water::1:1:0.2 and mixing it thoroughly using electric mixer coating to be done atleast 1’ longitudinally to secure edges and Filling all visible cracks using Nushar crack pack master/ Nushar make Cladofix. Laying 66 gsm non woven fiber along with 2nd and 3rd coat of CCP mix and cement mixture as in step 2 . Filling overlapping joints using Nushar make Master adhesive. Apply 1st coat of Nushar make Polymembrane coat using brush across the area. After curing of above layer apply second coat of Polymembrane coat. Apply 1st coat of Nushar make Nano top coat. Ponding test to be done by filling atleast ½” water in the entire area. Removing the water after the test is successfully completed. Apply 2nd layer of Nushar make Nano top coat to finish the work all as spd and directed by Engr -in-charge. Make: Asian Paints or equivalent in Sikka,Birla or equivalent in Berger Fosroc and STP Ltd.

S & F in repai 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I(Make : Sintex/Rotex/Polywell)

S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I I(Make : Sintex/Rotex/Polywell).

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

S&F Framed mild steel work as in doors or gates of angle or other sections with gusset plates, rails, braces, tank stagging etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and gurders) and hanging also fastening and complete all as specified and directed (Fe-410-W(Gde E-250)Quality-A). including demolition of old PCC tank staging

S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.

M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of block shall be of 2 Qtrs on each floor and vary in number of floors. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge

M&L for two coats synthetic enamelled paint over one coat of red oxide zink primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.

M&L Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 .

Ditto as item No 9 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

M&L Glazed ceramic coloured tiles (600X300mm) x 6-7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4.

M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc .11sqm and n exc .18sqm in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6).

Non - skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile 600x600mm, in floors, etc set and jointed in neat cement slury & pointed in coloured cement to match laid over a 15mm thick screed bed in CM 1:6.

Ditto as item No 35 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

M&L machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mix with pigment to match the shade of slab complete all as specified

M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account.

S & F in repair for floor mounted EWC one piece incl all necessary fittings complete all as specified and directed by Engr -in-charge. Make- cera soft close seat cover outlet gasket/inlet gasket.

Supply & fixing in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm with full Pedestal including 32mm dia PVC flush pipe and pvc connection pipe with coupling and set of brackets incl complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, PVC connection 450mm long including brackets and 32mm dia flush pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc, including plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge.

Dismantling of floor size not exceeding 4.00 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area of Each WC portion is n.exc 4.00 Sqm each. (h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note : The work will be executed by authorised manufacturers/applicator.

Dismantling of floor size not exc 1.50 Sqmtr for IWC Water closet and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note : The work will be executed by authorised manufacturers/applicator.

Dismantling false ceiling boards/ wall pannel any description and in any position incl frame work.

Providing & fixing false ceiling at (a) all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, 12mm (b) With sami perforated 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at and 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.

S&F Factory Made 18mm thick 100% Solid WPC,HDMR ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm)

S&F 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified.

S&F in repairs magnet catches and striking plate including letting in and fixed, complete all as specified.

S & F in repair for steel drapery Rod 18mm dia with brackets on wall with knobs complete all as approved by Engineer-in-chareg

Taking down gear operated rolling shutter for repairs of area n. exc. 8sqm and of any thickness of laths including top cover, spring and shaft, gear box with rod, side guide channels etc and refixing in its original positionafter necessary repair complete all as specified and directed by Engineer- in-charge.

All as per Sr item No. 53 herein before but rolling shutter of area exc 8sqm but n. exc. 30sqm each complete all as specified and directed by Engineer- in-charge.

M/S MSD & Associate (BID ID -3420680)

J S CONSTRUCTION CO (BID ID -3420608)

POONAM ENTERPRISES (BID ID -3411899)

M/s M M BAHL (BID ID -3413643)

Lamba Enterprises (BID ID -3408066)

M/S Parshant Associates (BID ID -3414416)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3413530)