Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-Finance BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-Finance Lowest and reasonable bid | |
| 2 | L2₹30.0 L+₹8,358.60 (0.28%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹31.7 L+₹1.8 L (6.05%)Rejected-Finance | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹33.8 L+₹3.9 L (13.0%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹35.2 L+₹5.3 L (17.7%)Rejected-Finance | L5 | Rejected-Finance Other than the lowest bid |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
23 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West)
Kabir Road Jalandhar Cantt
CERTAIN REPAIR MAINT TO OTM AND MD ACCN IN AREA A3 OF AGE BR1 UNDER GE WEST JRC
2023_MES_619667_1
GE/JAL(W)-56/2023-24
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrsion Engineer (West)
₹68,000
Yes
31 Oct 2023
20 Sept 2023
30 Oct 2023
20 Sept 2023
23 Oct 2023
11 Oct 2023
Amount
Demolition of cement concrete in ground floors and pavings not exc 15 cm thick below or above ground level.
M&L 40mm thick cement concrete type B-1, 1:2:4, (20mm graded stone aggregate) as in floor finishes etc
M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in path and in plinth protection finished fair and even.
M&L Cement conncrete 1:4:8 type D2 using(40mm graded stone aggr ) as in foundation filling complete all as specified and directed.
Roughening old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per Sqm to receive screed bed .
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match,and including 15mm thick screed bed in cement mortar 1:6.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match ,and including 15mm thick screed bed in cement mortar 1:6.
All as per item No 8.00 here-in-before but in vertical surface including 10mm thick backing coat of cement mortar 1:4.
Material and labour for vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm (square / rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm (square / rectangular) as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed.
M&L for ceramic coloured tiles of size 300x200mmx6-7mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured cement to match including 10mm thick backing coat plaster in CM 1:4
M & L chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6,complete all as specified
M & L Sand filling under floors or in foundations including watering and consolidation
M&L for 60mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment laidover and including 30mm thick sand cushioning consolidated with plate vibrater complete all as specified and directed.
Disconnecting existing water tanks of any capacity setting aside for repairs cleaning and removing all scale and dirt etc from tank and mouths of circulating pipes and re-fixing in position, complete all as specified and directed.
S&F in repairs vitreous China orissa pattern water closet size 580mmx440mm white with integral foot rest.
S&F in repair vitreous china white wash hand basin flat back size 550x400mm includingCI/MS brackets including cutting for and pinning 'in brackets but excluding waste pipe Make :
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
S&F in repairs 10 ltrs PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed by Engr in Charge.
Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store.
All as per item No 21 hereinbefore but 20mm dia .
S&F steel tubes medium grade galvanisedwith all fittings and fixed complete to wallsand ceiling or laid in floor bore of pipe 15mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4.
All as per item No 23 hereinbefore but 20mm dia.
S&F in repairs for 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipes or for Unions and fixed.
S&F in repair 20mm bore of pipe ball valves high pressure of PTMT with eppoxy coated aluminium rod & high density p[olythene ball screwed for iron pipe and fixed. (Min weight for 20mm - 210 gms)
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete
S&F in repair pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.
S&F in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties)
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, capacity 500ltr, and including dismantling of water tankog capacity exc 250 ltr but n exc 500 ltrs .
Dismantling of cast iron drain 100 mm dia from floor/walls etc and taking out of trenches/floors.
M&L for cast iron soil waste and vent pipe sandcast any length with or without ears with cement joints fixed to walls 75mm dia
All as per item No 35.00 above but bore of pipe 100mm dia.
M&L cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Diameter of outlet in 75mm.
M& L Cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor.
M&L for 15mm thick rendering in 1:3 CM with using 3% WPC as in sunken portion complete allas directed.
M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per square mtr including cleaning surfaces.
Taking down shutters of any description n exceeding 1 Sqm each
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each.
Material and labour for 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panel commercial type on both side with lipping/frame to match, complete all as specified and directed.
S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (b)
Material and labour for 19 mm thick factory made flush shutter solid core construction with block board core and plywood face panel commercial type on both side with lipping/frame to match, complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per directed by Engr-in-Charge
S&F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tacks, or galvanised wire staples.
M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.includingHacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty.
S & F Mild steel tower bolt anodised of extruded section 200mm
S &F in repair Mild steel 300 mm sliding door with hasp staple (bolt type) and fixing clipsof sheet caste or estruded section and fixing bolts and sliding both of extruded sections.
S & F MS cast type anodised handles 150 mm
S&F Butt hinges, medium weight cold rolled mild steel 100mm size.
S&F Butt hinges, medium weight cold rolled mild steel 75 mm size.
M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws
M& L in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixing by screw ,welding, etc as per requirement and complete all as spd and as directed .
S & F mild steel powder coated pelmet rods including 02 Nos of brackets complete all as specified and as directed by theEngr in charge
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed
M&L for brickwork with subclass 'B' size bricks, straight or curved on plan exc 6 cm mean radius , built in cement mortar 1:6 complete all as specified.
Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar.,including necessary form work and scaffolding from ground to (height upto 9.0Mtr) complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement ,including necessary form work and scaffolding from ground to (height upto 9.0Mtr) complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement
M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.
M&L for prepration of new plaster surfaces of walls incl, & applying two coats of exterior emultion paint over of wall primer and complete all as manufacurers instructions and directed by Engr -in-charge..
M & L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old surface of walls and applying one coats of oil bound distemper(white or tinted) complete all as specified and as directed by Engr-in-Charge.
Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification given on page 162 of SSR-2010 Part-II for solid PVC wall lining including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.and including dismantling of doarding of any discription complete all as specified and directed.
S&F for aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and as directed by the Engineer-in-Charge.
M&L for anoised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and as directed by Engr-in-Charge.
M&L for anoised aluminium window and ventilattor shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed by Engr-in-Charge.
S & F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty
S&F for sheet glass 5.50 mm thick ordinary quality and glazing with ail putty in squares exc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge
Supplying and Fixing plain colour PVC sheet 6mm thick fixed in Aluminium frame work by using suitable adhesive/fixing clips all as specified and directed by Engr-in-Charge.
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base of cement mortar 1:4, 15 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed
M&L Machine cut kota stone slab in skirting, dado 20-25mm thick over cement screed base of cement mortar 1:4, 10 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed
Steel window/ventilator 1.25 mm thick Box type ERW hollow P section of size 60mm x 25 mm single rebated comprises glazed and skelton shutter ERW Sec 50 MM x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T-section 20 mm x 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1, including shop coat primer and following fittings welded to shutters:-i) Hold fasts 150 mm long,12mm x 3mm made to shape -04 No’s, (ii) Handle of Z sec 20mm x 25mm , 100mm long per leaf -1 No’s (iii) MS tower bolt 150 mm long per leaf -2 No’s (iv) Z sec 20mm x 25 mm , 100 mm long stopper per leaf -1 No (v) Cleat 55 mm long of hollow square 15mm x 20mm x 63 mm welded to hinges per leaf -01 No (vi) MS pintal hinges of size 75mm x 12 mm per leaf -02 Nos (vii) Fabrication and fixing arrangement complete.
All as per description of item No 76.00 above but glazed
Taking down existing water proofing from roof slab and cleaning the roof slab incl scrapping of existing lose concrete from roof top and washing with water.
Supply only integral water proofing compound.
M&L 40mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg in padding Complete all as specified and directed.
M&L 12mm thick rendering on top of roof salb in cement mortar 1:4 by using water proofing compound @3% by the weight of cement, finishing the surface even and fair without using extra cement.
M&L for priming surfaces with bituminous primer polymerised primer oil based.
M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per sq mtr including cleaning surfaces.
M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 10 cm finally it will be finished with a coat of aluminium paint @0.200 Kg/Sqm as per manufactures instruction complete all as specified and directed complete all as spd and directed.
Dismantiling of unframed work timber scantiling 40 sqcm and over in section in any position complete all as sped
Dismantiling of plain or corrougated steel sheeting any gauge thickness including nainital or similar pattern roof covering.
S&F Steel work as in tubular section for Post, Purline etc including special shaped washer , angle cleat, holdfast, gussete plate etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (incl rivet or nut and bolts) providing and fitting angle cleats Gussete plates etc also for welding plumbing, truing up and fixing complete as directed by Engr-in-Charge.
M&L pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws/ J or L type hook bolts complete as directed by Engr-in-charge.
M & L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M & L for applying one coat of synthetic enamelled paint including preparation of old decorated steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge
M&L for 5.5mm thick sheet glass ordinary quality including solar control film 25 micron reflective type sticked on glass pane as per instructions of manufacturer and glazing fixed with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe 410 (or) Fe-310-0
B D BATRA AND SONS
G S TRADERS
AAY KAY ENGINEERS
M/S Vinod Kumar
M/s Nirmal Singh and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .