Repair Overhaul of 03 nos. Wasp Pumps (Make Wasp Pumps Private Limited, Type Reciprocating pump) installed at HEMM Workshop, Bina Project. (Work to be carried out at contractor site).

Amount

Materiasl required- For 03 nos. wasp pump

Gasket for lid (part No. R4313C); 01 no. in each pump

Hex Head bolt (Part No. S156A23); 08 nos. in each pump

Bush Bearing (part No. R4295); 06 nos. in each pump

Oil Seal (part No. R4336A/R4336); 09 nos. in each pump

Rubber cup for plunger (part No. 18922A10); 03 nos. in each pump

Nylon lock nut (part No. S2512A); 03 nos. in each pump

Suction Spring (part No. R4336A); 03 nos. in each pump

Discharge Spring (part No. R4336A1); 03 nos. in each pump

O Ring (ARW-415)(part No. S1926A73); 03 nos. in each pump

O Ring (ARW-411)(part No. R45001A16); 03 nos. in each pump

O Ring for liner (part No. R45001A26); 03 nos. in each pump

O Ring (ARW-205)(part No. 5876A5); 03 nos. in each pump

Liner (part No. R4326B); 03 nos. in each pump

Spring retainer (part No. R4335A); 06 nos. in each pump

Hex Head bolt (Part No. S19109A46); 10 nos. in each pump

Repairing/ grinding/ machining work- For 03 nos. wasp pump

Repairing and grinding of 6 nos. valve seats; 4 hrs for each (24 hours required in each pump)

Repairing and grinding of 3 nos. plunger; 4 hrs for each (12 hours required in each pump)

Repairing of 03 nos. oil seal housing by machining & polishing; 4 hrs. for each (12 hours required in each pump)

Repairing of 03 nos. crank by machining & polishing; 4 hrs. for each (12 hours required in each pump)

Repairing of 03 nos. lining housing by machining & polishing; 4 hrs. for each. (12 hours required in each pump)

Dismentaling and assembling of different pars of the Pump - For 03 nos. wasp pump

Skilled fitter (01 no. X 2 shift X 3 days i.e. 06 manshift-days for each pump)

Semi-Skilled fitter (01 no. X 2 shift X 3 days i.e. 06 manshift-days for each pump)

Applicable contractors profit

Total impact of GST for the purpose of CTC