Partition works at 5th to 7th floor Library and Computer IT Building, COEP Technological University, Pune.

Amount

Partition work

Dry wall - Providing & fixing 2hr.fire rated dry wall comprised of Gl framing without any joint for fire rated purpose with 12mm thick plywwod on both sides and 1mm thick laminate on both sides (without fabrication work made out of hot rolled sections) which will be anchored in the floor and will be anchored at the top to the structural member (Such as Rcc beam/slab/structural beam provided by client) . The wall should withstand lateral pressure of 20 kg/sq. mtr at deflection limit of L/240. The perimeter of the wall will have necessary backer rod & fire rated sealant. As the wall is non load bearing, it is not designed for seismic forces. Cavity of drywall infill with 50mm thick glasswool and density 60 Kg per cum. rockwool insulation with the help of insulation clip.Test certificate for 2hour fire rating to be provided for the system.Certificate of Tested system for Stability-Integrity-Insulation etc. as per detailed design and drawing or as directed by engineer in charge including all leads and lifts materials , labours, and equipment etc.complete. criteria for 120 minutes along with Hose Stream test at Thomas Bell Wright International Consultant Lab as per ASTM E119 (Standard Test Methods for fire tests of building construction and material) and ASTM E 2226 (Standard for application of Hose Stream) Make- Greenply, Duro, Century, etc.

Glass Partiton - Supply and installation of single glazed mullion free demountable glass partition using Toughened/Laminated glass in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. The Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system.it should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs. No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic if required. Glass thickness 10mm(TSG) All Profiles are min 1.5mm thickness excluding 20 micrans of Anodizing,Supplying and Installing approximately 100mm thick, Modular Tile (mullion and Transom) Based full height partition 3500mm high made out of Extruded powder coated Aluminium Frameworks (minimum of 2mm thick sections ) with combination of single Glazing and Opaque panels, door shutter and skirting. All mullions are fixed with walls, RCC ceiling / beam and floor as per the site condition with adequate chemical anchor fasteners as per the drawing number (A-903). Glazing should be 10mm thick toughened clear float glass fixed with frame work and all necessary accessories. etc. as per detailed design and drawing or as directed by engineer in charge including all leads and lifts materials , labours, and equipment etc.complete. Cabin partitions, Middle door opening partitions, External partitions Make- Modi guard / Saint gobain/ Asahi etc.

Flush Doors - The door shutter is factory made 32mm thick solid core Marine Ply flush door shutter confirming to IS 2202 (Part - I); shutter shall be manufactured with exterior quality synthetic adhesive forming marine ply surfaces, internally lipped as per approved manufacturer. Shutter shall be finished on both sides with 1mm thick Matt finish Laminate (with 1mm groove) of approved brand and manufacture, colour and design. The edges of shutter shall be provided with French polished 34 X 12mm thick teak wood beading's all around the shutter, corner jointing at 45 degrees fixed by using exterior quality water proof phenol formaldehyde synthetic resin, headless GI nails, screws. The beading is polished with melamine Polish and corner jointing at 45 degree. The shutter shall be provided with the following makes for each door all complete as per the drawing and directions of the Architect/PMC/Client. All hardware as as per below table and the locks should have Master key and grand master key system as per approval from Client / PMC. All work to be made only after submitting shop drawings and approval from Architect / PMC. etc. as per detailed design and drawing or as directed by engineer in charge including all leads and lifts materials , labours, and equipment etc.complete.Hinges Size- 150 mm- 4 Nos,Brass Matt Finish ‘L’ shaped Lever handle (on both side) -135 mm- 1 Nos , SS,Matt Finish Mortise lock with Euro-profile full cylinder lock with key outside and thumb turn inside- 1 Nos SS Matt Finish Automatic Door Closure with hold open arm- 1 Nos Door Stopper-1 Nos - SS Matt Finish Make- Merino / Greenlam / Royal Touche/Greenply, Duro, Century, etc.

Glass Door - Providing and fixing 10mm thick toughened glass door of 10 mm thick with all fittings and tools, Hafale floor spring and door handles to be used. etc. as per detailed design and drawing or as directed by engineer in charge including all leads and lifts materials , labours, and equipment etc.complete Make- Modi guard / Saint gobain/ Asahi etc.

SHRI VISHWAKARMA FURNITURE INTERIOR (BID ID -7111069)