CA NO CWE/CHM-88/2021-22 RENEWAL OF FURNITURE AGAINST SURVEYED OFF FURNITURE AT BSO GE CHANDIMANDIR

Amount

STEEL FURNITURE (PART-I)

Almirah (Small) Steel with Shelves (FD-1032). All dimension, shape and size shall be followed as per drg. (i) Steel Almirah (body, shutter, drawer, locker, vertical partitions and shelves) shall be made out of 1mm MS plain black sheet all as shown on drawings. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with three way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. Six lever brass lock shall be provided as per Godrej pattern of make Godrej, Link, Harrison. (iv) One steel chrominium plated handle shall be provided to the drawer. (v) Locker of the almirah shall be provided with locking arrangement operated with handle as per Godrej pattern. (vi) All steel surfaces internally and externally shall be painted with two coats of synthetic enamelled paint (silver grey colour) with spray gun over a coat of zinc chromate steel primer. (vii) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (xiii) Rest all as shown on drawing No FD1032 complete all as specified and directed.

Almirah Large Steel with Shelves (FD-1031). All dimension, shape and size shall be followed as per drg. (i) Steel Almirah (body, shutter, drawer, locker, vertical partitions and shelves) shall be made out of 1 mm thick mild steel sheet all as shown on drawings. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with three way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. 4 lever brass lock 65 mm size shall be provided as per Godrej pattern, of make GODREJ, LINK, HARRISON.(iv) Almirah shall be provided with three numbers adjustable shelves with four compartments (v) One steel chrominium plated handle shall be provided to the drawer. (vi) All steel surfaces internally and externally shall be painted with two coats of synthetic enamel paint (olive green) with spray gun over a coat of zinc chromate steel primer. (vii) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (viii) Rest all as shown on drawing No FD-1031 complete all as specified and directed.

Bed Map Steel (FD/E6/MAP/08(R)). (i) Bed hard shall be manufactured all as per details shown in the drawing. All dimensions, shape and size shall be followed as per drawing. (ii) All square and rectangular MS pipes shall be of thickness 18 gauge.(iii) Top of bed shall be of 12mm thick commercial plywood (unpolished) as per IS-303. (iv) Head board and foot board shall be of 18-19mm thick Prelaminated particle board (both side decorative finish shade as approved by GE) as specified here-in- before, screwed to MS strip all as per details shown in drawing. Standard PVC edging (minimum thickness 1.6mm) shall be provided alround in Head board and foot board. (v) Hard rubber/PVC shoe shall be provided to the bottom of each leg. (vi) All exposed steel surfaces shall be painted with two coats of synthetic enamel olive green paint over a coat of zinc chromate steel primer. The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (vii) Rest all as shown on drawing No FD/E6/MAP/08(R) complete all as specified and directed.

Locker Steel (FD-1029). (i) Over all size shall be 760mm long, 600mm wide and 1100 mm high. (ii) Locker steel shall be made of mild steel black sheet 1 mm thick. (iii) Hanging rod shall be mild steel chromium plated 20mm dia, 1.8mm thick with socket. (iv) Unless otherwise indicated on drawings, handle shall be of Mild steel chromium plated and 100 mm grip length. (v) One hasp & staple 75mm long shall be fixed to shutter. The shutter shall have the locking device also. (vi) FINISHES: Mild Steel surfaces shall be (spray) painted with synthetic enamelled paint of approved shade over a coat of primer externally and internally. (vii) Rest all as shown on drawing No. FD-1029 complete all as specified and directed. Note : Fixing of ‘ Locker” to the wall although shown in the drawing is outside the scope of this contract however key plates for fixing as shown on drawings shall be provided.

Ladder Aluminium (FD-1025). Over all size shall be 2310mm long, 363.5 mm wide and 1100 mm high. (i) Aluminium stringers with minimum wall thickness of 3.18mm shall be provided all as per details shown in the drawing. (ii) Rungs shall be of 23mm dia aluminium pipe with wall thickness not less than 2.43mm. (iii) Hard rubbers caps / shoes shall be fixed at the ends of aluminium rungs and stringers as shown on drawing. (iv) Rest all as shown on drawing.

Charpaoy GI Pipe with 12mm thick Ply wood top (DRG NO FD/E6/MAP-II/01) Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level .12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg..PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer. Rest all as per drg.

Teapoy Verandah (FD/E6/MAP/17). All dimension, shape and size shall be followed as per drg. (i) Frame, stiffeners, legs ,etc. shall be made of 18mm square MS pipe of thickness 18 gauge. (ii) Top of Teapoy shall be of 18-19mm thick Prelaminated particle board (one side decorative finish shade as approved by GE and other side white balancing lamination. (iii) Base tray made with 5mm dia mild steel bar (12 x 10Nos equidity distance) shall be provided. (iv) 4mm thick teak wood edging shall be provided alround. (v) FINISHES: All steel surfaces, exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surface. (vi) Rest all as shown on drawing No FD/E6/MAP/17 complete all as specified and directed.

Wooden Furniture & TP (Part-II)

Hat Stand with Mirror (Small) (FD-361) Dimenson. Overall size shall be 1000mm long and 710mm high. Desciption : The inner frame shall be of 50mm x 20mm teak wood battens six in Nos. The back and font of frame shall be covered with 6mm thick commercial ply. The edges of the frame shall be covered with 6mm x 35mm leak wood edging fixed alround the frame with headless nails and adhesive. Four brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg 5mm thick looking miror of (saint gobian, Modiuard/Autal) shall be provided as shwon on drg with beading alround. Mild steel key plate shall be provided at both top corners of the hat stand. FINISH : All teak wood surfaces shall be given high gloss French polish with lacquer fiinish. All steel surfaces ahll be painted with two coats of enamel paint over a coat of pumer. Rest all as per drgs.

Table dressing ladies with mirror (FD-251) All dimension, shape and size shall be followed as per drg. All wood shall be of Ist class hard wood teak .The bottom side and other side of dressing table shall be of 18/19 mm thick prelaminate particle board. Top shall be of 18/19 mm thick prelaminated particle board. Frame work of mirror shall be of Ist class teak wood back shall be of ply wood 6 mm commercial ISI marked, Mirror shall be 5 mm thick ISI marked. Make of mirror shall be Atul/Modi/Saint Gobin. All wooden surfaces shall be French polished to a glossy finish. Rest all as per drg No FD-251 complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR (DRG NO FD-379) All wood shall be of Ist class hard wood teak .The bottom side of dressing table shall be of 18/19 mm thick prelaminated partical board. Top shall be of 19 mm thick commercial particle board . Frame work of mirror shall be of Ist class teak wood back shall be of ply wood 6 mm commercial ISI marked, Mirror shall be 5 mm thick ISI marked. Make of mirror shall be Atul/Modi/Saint Gobin. All wooden surfaces shall be French polished to a glossy finish and all as per drg No FD-379 complete all as specified and directed.

Stool dressing with cushion (DRG NO FD/E6/MAP/14) (a) The plywood 12mm thick wherever shown on drawing shall be 18/19 MM thick decorative type with Prelaminated partical board finish on one side. (b) The seat shall be removable type made of 75MM thick synthetic foam of 40 density covered with tapestry cloth of shade and texture as approved by GE. The tepestry cloth shall be coating not less than Rs 450/- per runing meter. (c) All expoased edges of particle board shall be provided with 4MM thick teak wood edging unless otherwise shown on drawing. (d) All exposed surfaces of wood and wood based material shall be French polished. (e) Rest all as shown on drawing and as directed by approved by GE.

Teapoy Wooden (FD-278) All as shown on drg. Overall size of Teapoy wooden shall be 600mm long, 450mm wide 540mm high. All wood shall be of Ist class teak wood. Top of table shall be made out of prelaminated particle board 18/19mm thick exterior grade and 4mm thick teak wood beading shall be provided all round the table irrespective of what is shown on drg. Rest all as per drg No FD-278 complete all as specified and directed.

Side Board (FD-372) Overall size shall be 1500mm long, 450mm wide and 760mm high. DESCRIPTION: All wood shall be first class hard wood teak .The bottom frame shall be of 18mm thick teak wood frame and shall be 125mm high from ground.All sides i.e-front shutters ,top,bottom sides and front sides of drawers shall be of 18-19mm thick prelaminated particle board .Four drawers shall be provided in the right hand side of the side board . Left hand side shall have one hung shutters. Back of side board shall be of 12mm thick commercial ply irrespective of what is shown on drg.Bottom of drawers shall be of 6 mm thick plywood commercial. The shutters shall have continuous piano type hinges. The top of one shutter shall have 50mm long flush bolt fitted towards inside of shutter. Two knobs shall be provided to the shutter. Four knobs shall be provided to the four drawers (one for each drawer).3mmx19mm teak wood edging shall be provided to all edges of particle board and shelf. Rest all as per drg No FD-372 complete all as specified and directed. FINISH : All wood and particle board surfaces exposed to view when placed in position shall be French polished with high gloss finish.

Table Peg (FD-384) (Size 450 x 300x x380mm) Ist class seasoned teak wood shall be used through out. Top shall be made out of pre-laminated particle board 18/19 mm thick ISI marked exterior gde. 6 mm thick teak wood beading shall be used all around at top. Rubber PVC shoes shall be provided at the bottom of legs duly screwed. All wood surfaces shall be French polished to a glossy finish . Rest all as per drg No FD-384 complete all as specified and directed.

Chair dining (FD-1105) All dimension, shape and size shall be followed as per drg. Teak wood Ist class shall be used through out . Canning shall be done/woven in Godrej pattern with cane plastic 2 mm wide and 3 mm wide for border. Make of cane shall be of Premier/ Usha or equivalent. All exposed surfaces shall be french polished to a glossy finish. Rest all as per drg No FD-1105 complete all as specified and directed.

Sofa set 5 seater with cushion (FD-281 Sheet No 1/2 & 2/2). All dimension, shape and size shall be followed as per drg:- Sofa Set 5 Seater with Cushion. The set shall consist of one long piece of three seat and two small pieces of one seat each. Timber work shall be of Ist class seasoned teak wood. All joints and fixing shall be done in accordance with standard workman ship/specifications. Foam shall be 100 mm thick cushion of ‘cool’ foam of 40 density of size 550 mmx525mmx100mm covered with best quality tapestry cloth rate not les than Rs. 450/- per meter colour as approved by GE. All wood surfaces exposed to view shall be French polished. Rest all as per drg No FD-281 Sheet 1/2 & 2/2 complete all as specified and directed.

Chair Easy (FD-229) All dimension, shape and size shall be followed as per drg. Teak wood seasoned Ist class shall be used through out . Canning shall be done with cane plastic 2 mm thick and 3 mm for border. Cane plastic shall be used of make Premier/Usha or equivalent as approved by GE. All exposed surfaces shall be french polished to a glossy finish and rest all as per drg No FD-229 complete all as specified and directed.

Table Centre (FD-274) All dimension, shape and size shall be followed as per drg. Ist class seasoned teak wood shall be used through out. Top shall be made out of pre-laminated particle board 18/19 mm thick ISI marked exterior gde. 6 mm thick teak wood beading shall be used all around at top. Rubber PVC shoes shall be provided at the bottom of legs duly screwed. All wood surfaces shall be French polished to a glossy finish. Rest all as per drg No FD-274 complete all as specified and directed.

Table Bed Side (FD/276):- (a) Overall size shall be 460 x 230 x 510mm. (b) Top of table bed side shall be made of 18/19mm thick pre laminated particle board, one side laminated & other side white, balancing exterior grade with 5mm thick teak wood beading alround. (c) All wood work & teak veneered surface shall be French polished. (d) All joints & fixing shall be done in accordance with standard workmanship/specification in the drg No 276. (e) Rest all as per drg No FD-276 complete all as specified and directed.

Table 900 x 600mm w/o Drawer (FD-284):- Overall size shall be 900 x 600 mm and 760mm high. Rest all as per drg No FD-284 complete all as specified and directed.

Chair Writing (Wooden) (FD-280):- Dimension. Overall size shall be 535mm long and 470mm wide and 890mm high. Description. (i) Well seasoned teak wood throughout in frame work shall be used for framework, caning shall be done without any jjoint in the cane. The cane shall be of 2mm wide, 0.4mm thick half round gola type of shah/ equivalnet brand. The sides of the chair shall be canned with 03mm wide and 0.6mm thick cane. Hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. Finish. All wooden surfaces shall be malamine polish with lacquer finish of walnut shade, as approved by Engineer-in-Charge. Rest all as per drg No FD-280 complete all as specified and directed.

Almirah Mess Untensil (Wooden) (FD-93):- Dimension. Overall size shall be 1680mm long and 1070mm wide and 460mm depth. Description. (i) All wood shall be teak wood. (i) The size of box from bottom to upward direction shall be of 740mm long. (iii) There shall be three shelves of size 280 mm long each (iv) The four legs shall be of size 90 cm. (v) Rest is as sper drawing and approved GE. Finish. All teak wood surfaces shall be given high gloss French Polish with lacquer finish. Rest all as per drg No FD-93 and approved by GE, complete all as specified and directed.

Table 900 x 900 x 760mm (Wooden) (FD-94M):- Dimension. Overall size shall be 900 long and 900mm wide and 760mm high. Description. (i) All wood shall be teak wood. Top of the table shall be of 18mm thick pre-laminated MDF board with 4mm thick teak wood edging all around the top of table. All surfaces exposed to view when placed in position shall be given high gloss French Polish. Rest all as per drg No FD-94M and approved by GE complete all as specified and directed.

RECEPTICAL PVC (FD/E6/MAP/13). All dimension, shape and size shall be followed as per drg. (a) Recepticle shall be of covered plastic container of 75 ltr capacity made with thick polymer plastic of cello, brite or equivalent make alongwith lid and handles. Recepticle shall be of bright colours ie. Red,Green,Blue etc. Rest all as per drg No FE/E6/MAP/13 complete all as specified and directed. Recepticle shall be of make: Blow plast/Neel Kamal/ Supreme/ Cello/Polyset, as approved by GE.

Note. The above drawings are standard drawings and not being enclosed with the tender documents. If required theses can seen in any MES Office on any working day with prior approval.

Daya Nand Jindal

M/s R.K.Jain