SPL REPAIR OF PATHWAY FROM FCAB TO HAR MAIDAN FATEH CHOWK AT NAMS

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thick below or above ground level complete all as specified and as directed.

Excavation in trenches n exc. 1.5m wide and not exc. 1.5 m depth for foundation, etc or for shafts, wells, cesspools manholes etc. n exc 10 sqmm on plan and n exc 1.5 mtr in depth and getting out on soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soft / loose soil soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Material and labour for 150mm bore dia Reinforced concrete pipes Class NP 3 pipes laid and jointed with collar complete all as specified and directed.

Material and Labour for PCC 1:3:6 Type C-2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested, for pipes of 150 mm bore complete, all as specified and directed.

Material and Labour for 75 mm thick PCC 1:4:8 Type D-2, using 40 mm graded stone aggregate as in sub-base etc., complete, all as specified and directed.

Material and Labour for 60mm thick factory-made chamfered edge cement concrete paver block of M-35 grade with approved colour (Red/Yellow/Gray), design & pattern as in footpath, parks, lawns, driveways of light traffic parking etc., of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc. including dismantling of old/unsv paver block/PCC tile of any thickness or any shape complete, all as specified and directed.

Material and Labour for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges coping etc. in any description complete, all as specified and directed.

Material and Labour for preparation of new concrete surfaces and applying two coats plastic emulsion paint over a coat of primer complete, all as specified and directed.