WBPHED/20_02/EE/BOLMD/24-25

Amount

Supply and delivery at site of vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: Discharge (Q) : 30 mᶟ/Hr. Head (H) : 80 mtrs. Method of starting : Star-Delta Shaft-stainless steel, Impeller- S.S / GM, Outlet - 65/80 mm dia Motor : Operating Voltage : 415 (± 10 %), Phase : 3ph, 50 Hz ± 6% Speed : 2900 RPM, Method of starting : S/D Make : KSB / Texmo / CRI / KBL / MBH / or any approved vendor. (N.B : Manufacturer's test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.)

Supply delivery at site of 4 sqmm 3 core 1.1 KV Grade flat submersible copper conductor cable . (Make:- Finolex / Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

Supply & delivery at site of following size Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

10 mm² x 3 core

16 mm² x 4 core

Supply & delivery of following 1.1 KV Grade XLPE insulated Copper Armoured for control and power cable arrangement (Make:- Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

2.5 mm² x 4 core (As a Power Cable)

1.5 mm² x 7 core (As a Control Cable)

Supply & delivery of 100A Kit-kat Rewireable (Porcelain Fuse carrier & Base) (Make:- Havells / L&T / or any Approved Vendor list of PHED.)

Supply and delivery of 100 Amps re-wireable porcelain fuse unit type TPN, 415V Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (Make: Approved Vendor list of PHED.)

Supply & delivery of Re-wireable type TPN Changeover switch 100 Amps 415V, 50Hz, 4 Pole offload with steel sheet enclosure (Conforms: IS/IEC60947-1&3). (Make: Approved Vendor list of PHED.)

100 Amps, 4way, wall mounted Copper Busbar Chamber with steel sheet enclosure (Conforms:IS/IEC:60947-3). (Make: Approved Vendor list of PHED.)

Supply and delivery of the following valves, pipes and gauges etc at site-- (Make: Approved Vendor list of PHED.)

3mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

80mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

3 Phase actuator operated wafer type butterfly valve of 80mm dia. (PN-1.0) as per IS:13095, IP-68. Make: Actuator - Rotork/cair/Approved make of PHED, Valve : IVI/Jupitar /cair/Approved make of PHED. MOC & TC needed for valve and actuator.

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for wash out line. (MOC & TC needed for valve).

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312) (MOC & TC needed for valve).

CIDF 90°bend- 1no., CI flanged tee- 1no., blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1mtr.- 1 no. etc (as per IS specification and certification registered) for construction of delivery pipe line and wash out line.

Heavy type 250mm dia./suitable Split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design.

Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

150mm dial Pressure gauge [Range 0-7kg/cm²] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm. dia G.I. pipes and specials].

Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Supply, delivery at site and storage of Wall mounted made of sheet steel fabricated 2 mm for load bearing & 1.6mm for non load bearing, indoor type, dust & vermin proof, lP-54 degree of protection, powder coated painted with rubber gaskets cover, front lockable hinged door with all Switchgear and other items duly wired up and tested as per specification: Incomer: (A) 100 Amps, TPN MCCB with adjustable OL, 36 KA, E/F, auto phase corrector & necessary accessories with suitable SPD (i.e., Ammeter, Voltmeter, CTS & Switches), Outgoing:- (B) 7.5 HP to 12.5 HP, TP Star-delta Starter with other accessories - 1 Nos., (Suitable size capacitor bank to improve PF from o.85 to 0.98) (C) Yard lighting feeder with necessary accessories & time switch(Digital) - 1 No. (D) 3phase Actuator valve starter with other accessories -1 nos., (E) 1 HP ,3 PH,415V,Clorinator feeder with necessary accessories & level controller-1 no., (F) 32A MCCB FDR for IEP/MISC purpose-1no., (G) 32A MCCB for in House light-1no.,(E) PLC feeder with necessary accessories-1no.( All spare & components as per vendor list of phed)

Supply,delivery and storage at store of automatically controlled diaphragm type Chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10 kg/ CM2 with all accessories for pump & motor, foundation bolt, suction and discharge flange and with storage tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P., 3 Phase, 1450 RPM, squirrel cage TEFC induction motor, Motor will be IE3. [Make of Machine: As per attached vendor list of PHED.] N.B. T.C. & G.C. of pump & motor needed.

Making brick pillar 0.25 x 0.25 x 0.75 Mtr/Suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete. (Both Pipe line)

Making CC foundation for support of the 3nos kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Making earthing arrangement as per following --

Excavation of soil for installation of Earth electrode and filling and ramming for soft soil.

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long with TATA-Medium GI pipe with a provision to connect 25mm X 6mm GI flat strip complete with GI bolts, nuts, washers etc as required.

Supplying & fixing of earth Busbar of galvanized (Hot dip) MS flat 25mm X 6mm on wall having clearance of 6mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulator etc as required.

Connecting the equipments body to earth busbar including S&F 25mm X 6mm galvanized (Hot dip) MS flat on wall/floor with GI saddles as required and connection of equipments incld. drilling holes, with bolts, nuts, washers etc as required.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36cm X 86.36cm X 46cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width duly plaster with cement morter (inside) CI hinged inspection cover of size 36.56cm X 35.56cm with locking arrangement, GI reducer including drilling of 46nos. 12mm dia holes on the GI pipe.

Extra treatment of soil by using salt and charcoal or coke for plate electrode.

Supply & Making necessary GI Medium pipe (dia of pipe not less than 32mm) protection for submersible cable from kiox box to submersible pump-motor set including supply of all specials and complete the job. (For Road Crossing, if necessary)

Incresseing the existing tube well Casing height up to a standard level as per direction of EIC. Dia upto of 250mm.

Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size of 680mm x 760mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed.

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC.

Installation of MCC panel along with main switch, changeover, busbar chamber, cut out etc. all electrical equipment within the pump house, drawing of cable properly on suitable size GI cable tray on wall / as per direction of EIC as per layout & IE rules and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fixing of materials for taking power within the pump house from WBSEDCL end as per direction of EIC.

Installation and commissioning of above supplied Chlorinator with all accessories, PVC tank and drawling of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stonechips] and neat cement finish by supplying of all required materials and testing the entire set as per direction of EIC. [Power will be feed from PLC panel of pumping machinery].

Installation of above supplied Stabilizer by supplying all required materials with socket, gland, fittings etc. by skilled technical personnel as per requirement with making double eathing arrangement of the stabilizer in complaince with IE rules by G.I pipe electrode of 50mm dia 3mtr. long of 2 nos quantity by suitable GI strip / bar with all other accessories reuired to complete the work as per direction of EIC with commissioning earthing building.

Making internal electrification of pump house consisting of 1no. Ceiling fan point, 2nos. tube light & 2nos. LED bulb point, 1no. bulk head point and 4nos. 40W LED with arm bracket at outside and one three pin plug point incld. supply of all necessary materials (approved make Ceiling fan, Lamps & fixture etc.) to complete the work as per IE rules, wiring with 2.5 sqmm / suitable gauge copper wire within PVC casing, PVC switch board etc as per direction.

Commissioning of the whole installation and testing by licensed electrician and trial run for three months after Commissioning as per instruction of EIC by engaging one operater. [N.B: (1) Third party inspection of the work is mandatory as per guidelines of NJJM and direction of EIC without any extra cost. (2) Drawing, design and make of the materials are to be approved from the EIC before procurement.]

Add: GST @ 18% on sum of Item No: 1 to 24

Add: Cess @1% on sum of Item No. 25

DEY ENTERPRISE

INDRANI ENTERPRISE