Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-AOC | ₹4.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.4 L+₹28,896 (7.04%)Rejected-Finance | ₹4.4 L+₹28,896 (7.04%) | L2 | Rejected-Finance Being L2 |
Tender Value
₹4.9 L
EMD Value
₹9,780
Closing Date
27 Jun 2023, 2:00 pmClosed
Executive Engineer University Works Department
Office of the Executive Engineer University Works Department University of Jammu
Supply and Installation of basic lighting system in the Fountain at Jammu University Campus, University of Jammu
2023_UDJK_217666_1
Fresh eNIT 829 dated 14-06-2023 (4th Call)
Open Tender
Electrical Works
Item Rate
60 days
University of Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Executive Engineer University Works Department
₹9,780
17 Feb 2025
20 Jun 2023
30 Jun 2023
20 Jun 2023
27 Jun 2023
20 Jun 2023
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group ‘C’
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Make Havells / Grandley / Anchor / Pelican / HPL / L&T/Shalimar / Finlox Helicab ISI Marked) 2 x 2.5 sqm + 1 x 2.5 sqmm earth wire
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia 2mm thick
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 150 mm x 150 mm x 60 mm deep
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required 63 A TP&N
Providing and Laying of one number PVC insulated and PVC sheathed/XLPE power cable 1.1 KV grade of folowing size cables direct in ground including excavation and refiling the trench etc. as required, but excluding sand cushioning and protective covering 3.5 core 35 sqmm
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
Supplying 3 Core PVC copper cable size 16 sq.mm Armoured
Supply & installation of RGB type colour changing LED lighting fixtures as per wattage and type as per the details given below including necessary hardware such as clamps, nuts, bolts, nails, screws etc as required for fixing the fixtures in position as directed by Engineer in charge / Architect. The Light fittings shall be underwater type with water proof aluminium housing including an aluminium mounting clamp. The lights shall be fixed with ss anchor bolts in location under water as required. The lights shall be provided with an RGB controller to be fitted inside the panel box of suitable dimensions 3'x2'x1'-6" with 63 Amp TPN MCCB provided. The lights shall be controlled for RGB synchronisation through a single RGB controller with 8 zones and 10 preset modes for light effects to be changed automatically with timer controls to handly mix of any required number of lights as part of the water body and of of required capacity protection housed inside a water proof IP68 grade housing placed along the waterbody. All lights shall be as per wattage specified and shall be LED IP68 Fountain lights including all housing, mounting, clear shatter proof impact resistant glass, light emitter and constant current power supply driver. The complete fitting shall carry a warranty of minimum 2 years. Make of (OSRAM/PHILIPS/HAVELLS) 12wSurface mounted bracket lights
-------------------------do--------------------- 9w nozzle lights
--------------------------do-------------- 18w under water surface lights flush finish
M/S RAVINDER KUMAR CONTRACTOR
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .