RRD to LIS Barla Trimble in tehsil Bhattiyat Distt Chamba HP

Excavation in earth work and disposal of all excavated earth such as pick work, jumper work, blasting work in hard/ soft rocks, including dewatering in saturated soil upto all leads and lifts disposed earth to be levelled and neately dressed within all leads and lifts as per the direction of Engineer-in -Charge.

Wire crate made of G.I. wire filled with boulders with square cut faces aginst the wire (wire crate to be measured and paid for separetaly) the weight of boulder should not be less than 18 kg.each within all leads and lifts as per the direction of Engineer-in -Charge.

Wire crate made of G.I. wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for separetaly) G.I. wire 5mm thick corresponding to SWG-6. 15 cm x 15 cm mesh. The size of crate 1.25x1.25x1.25 metre within all leads and lifts as per the direction of Engineer-in -Charge.

Providing form work with steel plates 3.15 millimeter thick welding with angle iron in frame 30x30x5 millimeter, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc. up to 200 millimeters in thickness within all leads and lifts as per the direction of Engineer -in- Charge.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge.

Edge of slab and breakes in floor and walls under 20cm within all leads and lifts as per the direction of Engineer-in Charge.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work :-

In suspended floor roofs, landing & shelves and their support balconies, beams, girders, resumes and cantilever up to floor two level within all leads and lifts as per the direction of Engineer-in-Charge.

Providing Tor steel reinforcement for RCC.work including bending, binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in- Charge.