Special Repair and Maintenance of LTTD Plant at Agatti

Amount

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposalof rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied with Teflon coated Royal coated) on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.

Cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc…complete a) 40mm thick with 20 mm nominal size stone aggregate

Providing and applying wall putty of 2mm thicknessover plastered surface to prepare the surface even and smooth complete.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm plinth, sides of foundations etc layers not exceeding 20cm and watering lead up to 50 mtr and lift up to 1.5 metres

Providing and laying cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 granite chips 20 mm nomoinal size) foundation and plinth.

Half brick masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 Metal sand

Centring and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

6mm cement plaster to ceiling 1:3(1cement :3 metal sand)

Providing and fixing hand rail of approved size by welding etc.tosteelladderrail-ing, balconyrailing andstaircase railing including applying a priming coat of approved steel primer. G.I Pipe

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Painting GI pipes and fittings with two coats of Anticorrosive bituminous paint of approved quality

Finishing with Epoxy paint (two or more coats) at all locations prepred and applied as per manufacture's specifications including appropriate priming coat ,preperations of surface,etc.. complete on steel works.

Providing Aluminium sheet roofing fixed with .galvnized iron Jor L hooks and 8mm dia C.I plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick.

MOHAMMED NAZER M P

KAISER KHAN T P

MOHAMMED MP

ABDUL GAFOOR