Installation of Traffic light at Kabir Chowk, ward no. 29, M.C. Jind (recall)

Supply and Erection of Intelligent Adaptive APP Based Traffic Management System. Equipped with New tec- 520 next generation technologies with following Features. Related to SMD based Technology Traffic Control systems) One city One APP Provided by the agency Note:- Free Application APP Provided by the company including Free Training to Traffic Police for operations on Junction for Priority including free updating for 10 Years . POLICE CONTROL APP WITH FREE NETWORK NEED NO INTERNET/NETWORK FOR OPERATION. WORKING with free WIFI RANGE. GREEN WAVE CORRIDOR ACTIVATION OPERATION WITHOUT SERVER APPLICATION. USER FRIENDLY APPLICATIONS. FAULT RECORD CHECK and REPAIR GLOBAL HARWARE SETTING ACTUATION SETTING THROUGH ANDRIOD 9 VERSION. Compact Next Generation ITS Hardware and User friendly GPRS enabled Systems, Advance Voltage Control with software-based systems including three phase power Cross detections/spikes proof systems. Pre-timed, Vehicle Actuated, Remote Control, Hurry Call, Cable less linking and Flash modes of operation. 1) Built-in Facility optional central control system to ensure work stability thorough the extra software 2) 2*48 work periods for workday and holiday setting 3) Easy for maintenance and function extension by modular design; 4) Input AC220V, 5) Yellow flashing or power off at night can be set 6) Adopt RS-232 or LAN port to communicate with upper computer; 7) 32 working menus used for any period among 1~30 numbers customs can set it by choice); 8) The flashing state, frequency and time of each green signal light can be set or adjusted; 9) It can modify the current pace of running time in the running state immediately; 10) Full red, yellow flashing, step by step manual jump in the manual remote manual function optional); 11) Be equipped with the hardware fault testing function (Red Light fails, Green lights up test),down grade to Yellow flash status and cut down the Red and Green light power supply when the fault happens.(Optional) 12) The output part adopts zero-test technology Change of state is under zero state switch in communication Make the drive more safe and reliable; 13) Each output all the way with independent lightning protection circuit; 14) Equipped with Installation testing capabilities and it can be used to test if each light is correctly installed. 15) 30 menus can be used for backup and recovery 16) The setup software can operate offline Project data can be stored on the computer Also working with Android working APP Green Wave traffic signal technology. Special menu:- detector failure menu, Amber Flashing menu, total fault detection menu enables with DIP setup functions. Free Software connected through non web applications Makes:-Safetrans ITS/ SIEMENS/ Bel/Keltron Note: - NO PLC Based /GSM/Sim /Bluetooth System Accepted. Module certified under WPC . Mandatory :-have WPC (cyber–Protection Certifications)Certifications issued by the Government of INDIA against technology parameters.

Supply of Turner type Black sheathed PP 14core control cable 1mm copper Polypropylene super cable with full sheathed as per site requirement

Supply and Erection of Aspect stands suitable for moving of aspects L/R and S/F position according Traffic waves. The aspect stand made with Strips duly auto tight clamps complete with all respects,

Supply of Microprocessor based Jumbo Down Counter Time for ATC Signals to depict the timings of Red /Straight Green or Side Green timings independently. The down counters of approx size 22” x 20” fabricated form Reinforced Plastic with Ultra violet Diffuser display and having long hood and having 2.1/2 digits of 14” height and 8” width with 250 no.led,s approximately per digit.SMD BASED Illumination Circuitry system (make Safetrans ITS India/BEL/KELTRON)

Supply and erection of Sintex make Junction Boxes complete with connectors, clamps, wiring Jacks etc complete in all respects.

Power Source:-Supply and erection of Traffic Signal Controller power Backup SYTEMS (UPS BASES SYSTEM) Input: -160-280,12V-24V Output: -230VAC plus 0.5 Power source tech (EPG):- MPWMM, Efficiency-90% Technology: -MBT Batteries Backup Exide 24V Up to 200AMP Pure Copper Transformer with High Grade Lamination No Load DC Current Less than 0.7A plus /- 0.3 User configurable Grid Charging Current up to 20 Amp Customer Control Over AC Mains (grid) Charging ON/OFF 70 Micron High Grade PCB Battery Charging on Low Grid Voltage High Over Load and Surge Load Handling Capacity Unique ZMPT Based Isolated Grid Power Sensing Soft Front Panel all Function Control Switches - No Rocker Switches Behind the Device Intelligent Multi Stage Smart Charging (Bulk, Absorption, Float,) Best In Class External Surge /Lightning Protection Compatible to all Types of Batteries Including LiFePo4 With BMSNoise Free Pure DSP Sine Wave Output MCB Short Circuit Protection for Grid Power Blade Fuse Protection for Internal Components Makes (Convergence, Green dot, Pro/Eco-lite/ Suitable for Modems and controllers Complete in all respects

Supply and erection of Side walls made with ACP Frame with Black paint and front with retroreflecting material for night vision as per IRC standards with HIP White base complete with Clamps including fitting for Aspects Modules (set of 4 or 5)

Supply of Turner type Black sheathed PP 4-core control cable, 1mm copper Polypropylene super cable with full sheathed as per site requirement.

Supply, installation, testing, and commissioning of High-Current MOSFET-based Driver Cards for Independent LED Display Modules, designed for heavy-duty industrial or traffic signaling applications. Switching Technology: High-speed, heavy-duty MOSFET-based switching architecture designed to drive Plain Matrix LED modules with minimal heat dissipation. Operating Voltage: 24V DC input/output capability for high-brightness outdoor displays. Circuit Protection: Integrated Short-Circuit and Over-Current protection circuits on each output channel to safeguard independent display modules. Thermal Management: Mounted on an industrial-grade PCB with enhanced copper traces and heat-sinking to handle continuous high-load switching. Connectivity: Including industrial-grade plug-in connectors, high-temp wiring harnesses, and secure attachment terminals for seamless integration between the controller and display modules. System Integrity: Designed for `Fail-Safe` operation, ensuring display blanking or protection in case of logic signal failure. Approved Makes: Safetrans ITS, Siemens India, DIMTS, BEL India, or SSRC.

Supply, installation, testing, and commissioning of Protection Line Detection Indication Cards with the following specifications: Operating Voltage: 24V DC auxiliary power supply. Input Compatibility: Designed to interface with 12V DC/24VDC logic outputs from the Controller. Power Output: MOSFET-based switching design with integrated circuits (ICs) optimised for driving high-current/extra-load lighting arrays. Thermal Management: Equipped with high-performance, heavy-duty Anodized aluminum heatsinks for continuous operation under heavy load. Protection: Integrated fuse protection for each output line and visual LED status indications for line detection. Connectivity: Including all necessary connectors, industrial-grade wiring attachments, and mounting hardware, complete in all respects. Makes: Safetrans ITS, DIMTS India, Siemens India, BEL India, or SSRC.