Water Supply line JIPMER

Amount

2.10.1.1 Excavating trenches of required width for pipes, cables, etc including excavation forsockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , not exceeding 80mm dia.

2.27 Supplying and filling in plinth with river sand under floors, including watering,ramming consolidating and dressing complete.

4.1B.3 Construction of granular sub-base by providing close graded meterial, spreading in uniform layer with motor grader on prepared surface, by mixing place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision - By mix in place method - For grading III material.

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.43.1 Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - water bound macadam road

15.43.2 Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - bituminous road

31.47.6 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc., complete - 250mm diameter pipe.

31.48.4B Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 100 mm dia.

31.136.1K Providing, laying and jointing G.I pipes of medium class (blue) (TATA, TNT, Nezone, Apollo, Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, excluding GI specials such as bends, tees, elbow, coupling, reducer etc., complete all as per IS and CPWDspecification.-150mm dia

31.153.1E Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc, complete-100mm dia.

31.161.1F Providing, laying and jointing UPVC pipes (Finolex / jain/ Supreme/ Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI markedincluding transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, end caps etc., complete all as per IS and CPWD specification. - 110mm dia.

31.161.1H Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked includingtransportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints withrequired testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 160mm dia.

31.161.1K Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked includingtransportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,excluding UPVC specials such as bends, tees, threaded pieces,couplers, reducer, endcapsetc.,complete all as per IS and CPWD specification. - 250mm dia.

31.167.1L Providing and fixing in position UPVC moulded reducer coupler (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 160 x 110mm dia

31.167.1M Providing and fixing in position UPVC moulded reducer coupler (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 160 x 140mm dia

31.172.1D Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 110mm dia

31.176.1H Providing and fixing in position UPVC fabricated coupler (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 200 mm dia

31.178.1D Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 110 mm dia.

31.300.2A Supply and installation of Electromagnetic bulk flow meters with make (KROHNE / YOKOGAWA / EMERSON) which satisfies the specification as under - Electromagnetic flow sensor- type : Microprocessor based/pulsed DC - flow tube : SS304 - Coil housing: Fully welded sheet steel,- Liner : Teflon - Electrodes :SS316 - Grounding type : Rings - Grounding ring material :SS316 - Process connection : Flanged to ANSI 150# - Flange :CS,SORF- Area classification :safe - Protection class : IP 67 - IP 68(underground) - Accuracy : +0.5% of measured value - Outputs : 4-20ma, HART + Pulse - Status - Display : Digital - Parameters : Actual flow rate, totalized flow (8 digit) –Local indication : Programmable , front fascia programming - Power supply : 230 VAC -100 mm dia.