Providing electrification

Amount

UPS Circuit wiring: Supplying and drawing 3C x 2.5 mm² Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990, - Make: Finolex / RR cable / Polycab / V-guard.

UPS & 1 Phase circuit wiring: Wiring for lighting/power circuit using 2 run x 4 sqmm + 1 run x 1.5 sqmm one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring. - Make: Finolex / RR cable / Polycab / V-guard

Wiring for lighting/power circuit using 2 run x 6 sqmm + 1 run x 1.5 sqmm one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring. - Make: Finolex / RR cable / Polycab / V-guard.

Wiring for lighting/power circuit using 2 run x 1.5 sqmm + 1 run x 1 sqmm one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring. - Make: Finolex / RR cable / Polycab / V-guard

3 Ph Power point wiring: Wiring for lighting/power circuit using 4 run x 10 sqmm + 1 run x 1.5 sqmm one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring. - Make: Finolex / RR cable / Polycab / V-guard.

Main Power Point wiring: Wiring for lighting/power circuit using 4 run x 16 sqmm + 1 run x 2.5 sqmm one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring - Make: Finolex / RR cable / Polycab / V-guard.

PVC casing and capping: Supplying and fixing of 25 mm thick size PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. - Make: Modi / Classic / Kaveri / Polycab.

PVC casing and capping: Supplying and fixing of 38 mm thick size PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. - Make: Modi / Classic / Kaveri / Polycab

Open PVC Conduit wiring: Supplying heavy gauge PVC conduit pipe of 40mm dia. 2.5 mm thick conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. White / black coloured as applicable.

Open PVC Conduit wiring: Supplying heavy gauge PVC conduit pipe of 25mm dia. 2 mm thick conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. White / black coloured as applicable.

Open PVC Conduit wiring: Supplying heavy gauge PVC conduit pipe of 19/20 mm dia. 2 mm thick conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. White / black coloured as applicable.

PVC flexible conduit pipe: Supplying PVC flexible conduit pipe 20 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely.

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. Complete for each outlet. - Medium point above 3Mtr upto 6Mt from tapping point to outlet via switch. - Wire make: Finolex / RR cable / Havells / Polycab, - Switch make: Anchor / Lisha / Elle.

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. Complete for each outlet. - Long point above 6Mtr upto10Mtr from tapping point to outlet via switch. - Wire make: Finolex / RR cable / Havells / Polycab, - Switch make: Anchor/Lisha/Elle

Supplying and fixing of modular 6A One Way Switch existing modular switch plate as per IS 3854 and IS 1293.

Supplying and fixing of modular 16A Three Pin Top existing modular switch plate as per IS 3854 and IS 1293.

PVC modular box: Supplying and fixing of 8 Way surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick / C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.

Modular switch mounting plate: Supplying and fixing superior quality 8 Module modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.

Power board: Supply and fixing of power board made up of 10” x 8” x 1.5” polished wood board with base plank covered with 3mm tick hylum Plastic sheet and consisting of 2 nos of 16 Amps switch and 2 nos of 16 Amps 5 pin socket. - Make: Anchor / GM / Elle / Cona

Power board: Supply and fixing of power board made up of 4” x 4” x 3” polished wood board with base plank covered with 3mm tick hylum Plastic sheet and consisting of 1 nos of 6 Amps 5 pin socket. - Make: Anchor / GM / Elle / Cona

LED modular panel light: Supplying of recess / surface mounting type LED modular panel light of 2’x2’ – 36W comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI>70%. Efficacy > 100 lumen per W, 120 degree beam spread, life >25000 burning hours and Compliance to IS 10322/IEC 60598, LM79 & LM80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF >0.95, power loss should <5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM79. - Make: Phillips / Bajaj / Havells / Surya / Eveready

LED Light fittings: Fixing all types and all capacities of 2”x2” LED Light fittings indoor on the wall/ceiling/rafters/girders with necessary supporting frame, using 2310.0076 "twin twisted PVC insulated wires, required Nos of round blocks and clamps

Wall mounting fan: Supplying 400 mm sweep wall mounting fan with speed control & oscillating string suitable to operate at single phase 230V AC, supply. - Make: Bajaj / CG/ Atomburg / Havells / Usha

Wall mounting fan: Fixing a ceiling/wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

Power board: Supply and fixing of power board made up of 15” x 12” x 2” polished wood board with base plank covered with 3mm tick hylum Plastic sheet and consisting of 4 nos of 16 Amps switch and 4 nos of 6/16 Amps 5 pin socket. - Make: Anchor / GM / Elle / Cona

Modular power board: Supply and fixing of power board made up of 12 Way PVC modular box with superior quality modular switch mounting polycarbonate plate consisting of 4 nos of 16 Amps one way switch and 4 nos of 6/16 Amps universal socket. - Make: Lisha /Anchor Roma / ABB/ Legrand

Modular power board: Supply and fixing of power board made up of 3 Way PVC modular box with superior quality modular switch mounting polycarbonate plate consisting of 1 nos of 16 Amps one way switch and 1 nos of 6/16 Amps universal socket. - Make: Lisha / Anchor Roma / ABB / Legrand

Modular power board: Supply and fixing of power board made up of 6 Way PVC modular box with superior quality modular switch mounting polycarbonate plate consisting of 2 nos of 16 Amps one way switch and 2 nos of 6/16 Amps universal socket. - Make: Lisha / Anchor Roma / ABB/ Legrand

Metal Socket set: Supplying and fixing of 20Amps SP&N Metal Socket set of 2pole and earth plugs and socket with 32A DP MCB. The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely. - Make: Legrand / L&T / Havells / HPL / ABB

MCCB distribution Panel: Supplying and fixing of 4 way regular MCCB distribution Panel confirming to IS/IEC 61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall / wood board / flush mounting using required cl A, bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Double door with necessary bus bar completely wired to use on 440V 3phase 4wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. – Make: Legrand / ABB / Havells / Schnider / Anchor

Moulded Case Circuit Breaker (MCCB): Supplying and fixing of Four Pole 125 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Microprocessor release shall have Earth Fault as per IS/IEC 60947-2 (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Cicrcuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. - Make: Schneider / Siemens / ABB / L&T / C&S / CG

Miniature circuit breaker: Supplying and fixing of 63 A TPN rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OF, energy cross-3 with short-circuit breaking capacity of 10K and wiring complete as required, confirming to IEC 60898.- Make: Schneider / Siemens / ABB / L&T / C&S / CG

Miniature circuit breaker: Supplying and fixing of 40 A SP rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OF, energy cross-3 with short-circuit breaking capacity of 10K and wiring complete as required, confirming to IEC 60898. - Make: Schneider / Siemens / ABB / L&T / C&S / CG

Miniature circuit breaker: Supplying and fixing of 6-32 A DP rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OF, energy cross-3 with short-circuit breaking capacity of 10K and wiring complete as required, confirming to IEC 60898.- Make: Schneider / Siemens / ABB / L&T / C&S / CG

Metal Socket set: Supplying and fixing of 30Amps TP&N 5 Pin tempra Metal Socket set with 40A TPN MCB and plug top. The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely. - Make: Legrand / L&T / Havells / HPL / ABB

Cable tray: Supplying and fixing 300 x 50 mm, 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. The cable tray should be painted with suitable colour enamel paint.

Earthing: Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400 x 400 x 400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts including naming of earth pit.

Copper strip: Supplying and fixing 25 x 3 mm copper strip for grounding connections, using necessary fixing materials like insulator, clamps, welding etc. as required.

M/s Anugraha power services (BID ID -3232807)

DSOUZA ELECTRICALS (BID ID -3233070)

Raaj power solutions and facilities (BID ID -3229811)

Shri Padma Electricals (BID ID -3232734)

SHRI SOMALINGESHWARA ELECTRICALS (BID ID -3232784)