SPL REPAIR ROOF TREATMENT WATER PROOFING FOR EXT WALLS AND 7 WASHROOMS OF MIG 29K SIMULATOR P642 AT INS HANSA AND PROVN OF Y SHAPED ANGLES ALONGWITH CONCERTINA COIL ALONG PERI WALL NEAR RAM MANDIR AT VARUNAPURI UNDER AGE BRI EMI BRII OF GE NW VASCO

Amount

SPECIAL REPAIRS TO 07 WASHROOMS AND ROOF OF MIG -29K SIMULATOR BUILDING (P-642) AT INS HANSA. (B/R PORTION)

M&L for gunniting exposed concrete surfaces of beam, column and slabs with one layer of conplast spray set modified concrete in proportion (50Kg cement 3 to 6mm granite chips 75 kg zonal sand 75 kg and complast 2% by weight of cement water 1 to the following locations :-

40 mm thick in columns

30 mm thick in beams

20 mm thick in slabs

S&F hard drawn steel wire fabric cut to length bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dia not exc. 4 Kg/sqm complete all as specified and as directed.

Bonding the entire exposed surface with one coat of fosroc Nitop bond SBR as per manufacturer insltructions over whire fabric and surfaces of concrete structure complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed in floors/ walls complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S & F in repairs 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and remove from site complete all as specified and as directed.

Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking ofF shutters from the frame) and remove from site comlete all as specified and directed.

S&F powder coated aluminium door and window shutter and frame any type (sliding or openable) and other similar work etc 60 micron section, fabricated by using the JINDAL / INDAL / HINDAL / CENTURIAN sections including all necessary roller wheels for window, cleats, handle, door stoper, handle, locking arrangement, Mortice lock and arrangements to received glass/ prelaminated particle board with aluminium beading and stainless steel screw incl cost of rubber gasket beadings etc complete sealing between frame & wall with epoxy sealing compound. (The weight of rubber gasket beading will not be measured and paid, glass and prelaminated particle board will be measured and paid seperately) All sections as approved by GE

S&F Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including standed aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and as directed

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam colour PVC sheet on back face, including 20 mm thick PVC lining around all 4 edges of shutter, supplying & fixing in frame at site as per specification & drawing all as specified and as directed.

S&F Factory made 100% solid wood plastic (WPC) Decorative Door Frame, single rebate of size 75mm x 50mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum complete all as specified and as directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F butt hinges medium weight stainless steel 100 mm size complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified and as directed.

S & F Aluminium alloy wire mesh, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples in repairs complete all as specified and as directed.

S&F 4mm thick sheetglass ordinary quality exceeding 0.5 sqm each pane complete all as specified and as directed.

S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 25 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in roof for maintaining proper slope to avoid waterlogging all as specified and as directed.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in subbase, plinth protections, finished even and smooth w/o using extra cement complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 300 x 200 x 7mm/ 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick rendering in CM 1:4. complete all as specified and as directed.

Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve all as specified and directedin SSR Part-I complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia complete all as specified and as directed.

All as per item No. 34 above but 25 mm dia complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20mm complete all as specified and as directed.

All as per item No. 36 above but 25 mm dia complete all as specified and as directed.

S&F in repair Angular stop cock of 20 mm dia with wall flange, cat No. QQT-7053 of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F in repair Table top basin of size 500 x 420 x 190 mm, Cat No. FNS-WHT-40931 of Jaquar or equivalent in Parko/ kohler with fixing accessories set complete all as specified and as directed.

S&F in repair two way bib cock with wall flange, cat No. QQT-7041, of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F in repair Central Hole Basin Mixer with Regular Spout without popup Waste system with 450 mm long braided hoses, cat No. QQT-7167B, of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F in repair Bowl for coupled WC with PP soft close seat cover, hinges, accessories set, of size 375 x 650 x 800 mm, Make:Cat No. ARS-WHT-39751 along with cistern and its fitting, Cat No. ARS-WHT-39201 of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F in repair for hand shower (Healh Faucet), dia 8mm 1.2 mtr long flexible tube & wall hook. Make:Cat No. ALD-573, of Jaquar or equivalent in Parko/ Kohler complete all as specified and as directed.

S&F in repair Toilet paper holder recessed type (stainless steel). Make:Cat No. AHS-1551, of Jaquar or equivalent in Parko/Kohler

S&F in repairs Soap dish, of material brass with glossy finish,Cat No. BA-45 of Prayag or equivalent complete all as specified and as directed.

S&F in repair Urinal (Top inlet) with fixing accessories set of size 475 x 300 x 715 mm, Make:Cat No. URS-WHT-13259 of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F Metropole Flush Valve Regular 32 mm size (concealed body) with exposed shut off Provision and Round Flange, Make:Cat No. FLV-1095 of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F in repair Towel Rack 600 mm long with Lower Hangers, stainless steel. Make:Cat No. AKP-35781PS, of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F in repair Overhead shower 200mm dia round shape single flow (body and face plate brass with chrome plated) with rubit cleaning system, cat No. OHS-1813 of Jaquar or equivalent in Parko/Kohler complete all as specified and as directed.

S&F in repair Wall mixer with provision for overhead shower with 115 mm Long bend pipe on upper side, connecting legs & wall flanges, cat No. QQT-7273UPR of Jaquar or equivalent in Parko/Kohler.

S&F in repairs fancy type chromium plated 20 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

PVC Connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in PVC (SWR) floor trap 75 mm, plain with CP grating including joining with solvent cement complete all as specified and as directed.

Bottle trap of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms) 32mm bore complete all as specified and as directed.

S & F Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Pre - cast cement concrete masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks wall built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement)

M&L rendering 15 mm thick in CM 1:6 on concrete solid block wall internal surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with 3% integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately.

M&L Preparing new plastered ceiling surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling complete all as specified and as directed.

M&L Preparing new plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall

M&L Preparation of Old/new plastered surface and applying two coats of weather proof high glove antifungal paint on external surface with suitable primer

M&L complete removal of existing treatment and Preparing old plastered ceiling surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling.

M&L complete removal of existing treatment and Preparing old plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall.

S& F in repair Ball brass valve, high pressure, with polythene floa thorizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 25 mm bore complete all as specified and as directed.

S&F 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shutters of cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work with all fittings and locking arrangements as per direction and specifications.

S&F 18 mm thick non laminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work with all fittings and locking arrangements as per direction and specifications.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Virified Ceramic tiles light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors laid over & incl 15 mm thick screed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and as directed.

All as per item No. 72 but as in skirting/dado but over 10 mm thick rendering over CM 1:4 complete all as specified and as directed.

M&L Dismantling Single layer Mangalore pattern or similar tiles in roofing embedded in cement mortar complete all as specified and as directed.

Providing 10mm thick plaster in CM (1:4) mixed with 3% integral water proofing compound over roof top surface finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid seperately

Supply only water proofing compound

M&L for applying evenly & priming with oil bound bituminius primer at 0.4Ltr per sqm for water proofing treatment complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application completed all as specified.

INTERNAL ELECTRIFICATION

Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC conduit medium grade of as required size (not less than 20 mm in width) ISI marked medium grade with all accessories of same grade fixed concealed in wall including provision of modular metal flush box, modular cover plate with frame top cover for housing switch, socket, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed

All as per item No. 81 here in before, but for one fan/exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed

All as per item No. 81 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed

M & L for surface point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC conduit medium grade of as required size (not less than 20 mm in width) ISI marked medium duty, with all accessories of same grade, fixed concealed in wall including provision of modular metal flush box, modular cover plate with frame top cover for housing mounting switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type on the independent board complete all as specified and as directed

Taking down unserviceable any type of copper/aluminium sub main wiring of any type/size/core/ type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed.

M & L for sub main wiring with two runs of single core 4 Sqmm FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non metallic rigid PVC conduit medium grade of as required size (not less than 20 mm in bore) with all accessories such as Tees, elbows, junction boxes etc, as required fixed concealed in wall along with one run of 2.5 Sqmm single core FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit)

S & F in repairs modular Switch single pole one way 6 A, 240 V complete all as specified and as directed

S & F in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed

S & F in repairs Modular Socket outlet 2 in 1, 6 Amp, 240 volts, complete all as specified and as directed

S & F in repairs Modular Socket outlet 5A/16A, 5 in 1, 3 pin, flush type universal, 240 voltscomplete all as specified and as directed

S & F in repairs Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

Taking down unserviceable any type of Main Switch, DB's including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed.

S&F in repairs MCB DB SPN 4 way DB 230 V with 200 A rated bus bar double door type complete all as specified and as directed.

S & F in repairs MCB SPN 06 -32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed

S & F in repairs MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed

S & F Energy efficient surface Mounted LED Luminire 20 watts 4' long, 230 volt, 50Hz AC with acrylic cover aluminium exeruded body complete with all accessories incl necessary three core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed complete all as specified and as directed.

S&F in repairs LED batten 1x 9 W inverter batten working on AC supply in normal mode and DC supply in inverter mode with inbuilt battery back up of upto 4 hours with high efficency, high lumen output, 2 ft LED 230 volt 50hz all accessories including integrated electronic driver complete all as directed.

Supply and fix exhaust fan, steel/metal body AC single Phase. 230V of size 300mm sweep suitable for 230 volt 50 hz complete all as specified and as directed.

PROVISION OF Y-SHAPED ANGLES ALONGWITH CONCERTINA COIL ALONG PEREMETER WALL NEAR RAM MANDIR AT VARUNAPURI

Excavating in hard/dense soil in post holes (Or similar) each n exc 0.50 Cum getting out returning filling in and ramming earth or broken rubble mixed with each around, in layers n exc 25 cm watering and removing surplus soil to a distance exc 50 m and making good surface complete all as specified and as directed

M & L Cement Concrete Type C2 1:3:6 (40mm graded agg) in foundations,filling and mass -concrete in walls or retaining walls, any thikness, size or shape including pilasters, buttresses column, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, wind ties, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conferming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L for preparation of new surface n.exc 10 cm width or grith and applying two coat of synthetic enamel paint on steel surfaces over a coat of red oxide complete all as specified and as directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured)

Providing and fixing double layer concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total 90m) having 50 nos rounds per 6 metre length, with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied wtih GI staples and GI clips to retain horizontal including necessary bolts or GI bared wire tied to angle iron all complete as per direction of Engineer-in-Charge wtih reinforced barbed tape (R.B.T) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq mm wtih tape (0.52 mm thick) and weight 43.478 gm/metre (cost of MS angle C.C blocks shall be paid separately).

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and as directed.

M&L cement concrete 100 mm thick type D2 (1:4:8) (40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry of 1:3:6 type C-1 with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:4 with WPC over a coat of 10mm thick in CM 1:6 on other than fair faces of brick or concrete surface and rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

pk janardhanan

M/s J.D. DESAI