BARRICATING WORK AND ALLIED MAINT WORK FOR ANNUAL NCC PM RALLY, SPL REPAIR TO MAIN KITCHEN AT DGNCC, REPAIR/ REPLACEMENT OF VERANDAH ROOF IN BLDG NO T-10 OF 261 ARTY BDE SIG COY, PROVN OF RAIN PROTECTION SHED AND MISC B/R WORKS FOR QTR NO P-17 CASSEL

Amount

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

Transporting and fixing only of wooden post and placing in position and fixing of wooden post including treatment of wooden post below ground level with hot mixture of tar and creosote in proportion of 20kg of coal tar to 20kg of creosote and painting one coat of synthetic enamel paint on posts on portion above ground level. (size of post is 10cmx10cmx1.65mtrs), complete all as specified and as directed. (Note : Excavation and earth work shall be measured separately in item No 1 here-in-before)

Taking out and Transporting after use, wooden post of any description embedded in ground and making good embedded portion of disturbed ground and removing the wooden post to respective MES store yard and stacking properly, complete all as specified and as directed. Note : (Wooden posts shall be obtained from item No 2 here in before.)

Transporting and fixing only GI Tubing 40 mm dia, placing and fixing in position with mild steel clamps & bolts to wooden posts, complete all as specified and as directed. (Note : GI Pipes, clamps and bolts shall be issued as free for fixing and return to MES store after completion of work.)

Taking out/down after use and Transporting, GI tubing 40 mm dia including mild steel clamps, bolts nuts etc., and removing from site and depositing to respective MES store yard and stacking properly, complete all as specified and as directed.

Transportation and fixing only welded mesh with MS angel iron frame 300cmx165cm height, placing and fixing in position including one coat of aluminium paint, complete all as specified and as directed. (Note : 1. Welded mesh with angle iron frame shall be issued as free for fixing only.)

Taking out after use and Transporting, welded mesh frame including embedded portion and making good disturbed ground and removing the same to MES store Yard and stacking properly, complete all as specified and as directed.

Transporting and fixing only of GI pipe frame of 40mm dia and placing in position and fixing complete including one coat of aluminium paint size of frame 2.95 to 3.05m long and 1.5m high, complete all as specified and as directed. (Note : 1. Welded mesh with angle iron frame shall be issued as free for fixing only )

Descritpion all as per description of Srl item No.- 08 here-in-before but size of frame 2.85 m long and 1.5m high, complete all as specified and as directed.

Descritpion all as per description of Srl item No.- 08 here-in-before but size of frame 1.5 m long and 1.5m high, complete all as specified and as directed.

Taking out after use, embedded/ fixed posts of GI tubing including making good disturbed ground and transporting the welded frame to MES store yard with transportation and stacking properly, complete all as specified and as directed. (Note :- Taking down from Srl item No 8 to 10 of BOQ)

Transportation and fixing only steel wire fabric frame of size (1.5m x0.9m), placing and fixing in position of steel wire fabric and frame with nuts and bolts to the MS pipe posts and painting one coat of aluminium paint, complete all as specified and as directed. (Note : 1. Welded mesh with angle iron frame shall be issued as free for fixing only .)

Dismantling after use and Transporting of steel wire fabric from MS pipe stand and transporting to MES store Yard and stacking properly, complete all as specified and as directed.

Transportation and fixing only Welded mesh of mild steel in angle iron frame of size 3000mm length x 1650mm height after applying two coats of aluminium paint over a coat of red oxide, complete all as specified and as directed (Note : 1. Welded mesh with angle iron frame shall be issued as free for fixing only .)

Dismantling after use and Transporting of welded mesh of angle iron frame and removing to MES store Yard and stacking properly, complete all as specified and as directed.

Transporting and fixing only Stainless Steel square poles of 150mm size width and 1.50mtr height, placing and fixing in position complete including buffing and polishing of SS poles all as specified and as directed. (Note : SS Poles shall be issued as free for fixing only ).

Dismantling after use and Transporting of stainless steel poles and depositing to MES store Yard and stacking properly, complete all as specified and as directed.

Transportation and fixing Welded mesh of stainless steel in angle SS frame of (Overall area of frame with mesh not exceeding 4.00 Sqm each) including placing and fixing in position after buffing and polishing of SS complete all as specified and as directed. (NOTE : Welded mesh of stainless steel with frame shall be issued as free for fixing only ).

Dismantling after use and Transporting of welded mesh of stainless steel in stainless steel frame and depositing to MES store Yard and stacking properly, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M & L for Mild Steel work as in Bands, straps, supports or stays for rainwater, base plate, staple plate, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

M & L for Stainless Steel work of Grade-304 as in vertical post/pole of any type and size (upto a height of 10 Mtrs and 200mm dia) including special shaped washers, channels, plates horizontal/ vertical also ornamental works like designer railing chain, lotto any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item).

Welding existing old GI/MS pipes /angle iron frame (length of weld joint exc 5mm but not exc 15 mm joint for barricading including preparation of surface and finishing the same by painting one coats of aluminium paint complete all as specified and as directed.

M & L for Epoxy Grouting of superior quality filling in joints to address seepage problem of any type of surfaces (Kota/Granite/floor & wall tiling etc) including scraping off the existing treatment in joints of any type as per manufactures instructions complete all as specified and as directed. (Make : Aditya Birla/Asian Paints/Dr. Fixit) Note :- (i) Application shall be done through authorised applicator only. (ii) Purchase voucher of Epoxy Grout shall be produced for verification of Engr-in-Charge/GE before RAR.

Deep Cleaning of surfaces such as (Granite, Kota Stone, Any other type of floor/wall tiling surfaces) horizontal or vertical after complete filling of white cement and pigment on existing grooves including scraping/sweeping of the cement slurry, dust, mud, algae or any type of foreign materials or any type of debris and cleaning the splashes upto the complete satisfaction of Engr-in-Charge, complete all as specified and as directed. (Note :- 1. Deep cleaning shall be done through a light grinding cleaning machine having water tank mounted and water sprayer, operated by an experience operator and by using water and adequate floor cleaner and chemical. 2. Water through water bowser, grinding machine, operator and floor cleaning chemical shall be arranged from contractors side and no extra payment shall be made for the same 3. Splashes or debris coming out from cleaning shall be thrown, out side defence land and the rate shall be deemed to include in the quoted rate of item).

M & L for Machine cut kota stone slab flooring 18-20mm thick over & including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing after dismantling of existing kota, stone slab of any description complete all as specified and as directed.

M&L for grinding and polishing existing old kota stone or any other type of stone flooring, complete all as specified and directed

S & F for PVC hollow wall panelling 5 to 8 mm thick wood grain/ teak finished pre-laminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including taking down existing panelling of any type complete all as specified and as directed.

M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exc 42 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over & including 15 mm thick avg screed bed in CM 1:6 and after dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.

S & F designer board false ceiling of size 600x600x4mm thick E-Board white pre-laminated sett embossed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 1mm dia to be fixed by approved rawl plug, level and adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.

M&L for PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in foundation, complete all as specified and directed.

S&F for mild steel bolts with dia of neck 12mm, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square not. Exc 30cm long.

S&F for mild steel Plates (plain or chequered) channels, square/ rectangular, cut or notched (ordinary and counter sunk) forming holes, without any attachment

M & L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required (Size and pattern as approved by GE) and including dismantling of old existing kerb stone of any type and size etc. complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint, any tint on new brick, kerb stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of new surfaces and including 2-3mm wall care putty over a coat of primer complete all as specified and as directed.

M & L for preparation of Old concrete surfaces and applying two coats of synthetic enamel paint over a coat of primer including a coat of 1to 2mm thick wall care putty complete all as specified and as directed.

M & L for preparation of pathway/flooring duly brooming/scraping the existing surfaces and also removing the vegetable/grass over it (over Interlocking/Chequered tile/concrete surfaces) or any type of other surfaces old/new or in any position and applying two coats of indigo floor paint of superior quality complete all as specified and as directed. (Make : Asian Paints/Berger/Indigo).

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving not exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

Dismantling of PVC water tanks exc 500 liters but not exc 1000Ltr capacity of any condition or type complete all as specified and directed.

Dismantling of Cast Iron pipe/PVC pipe up to 100 mm bore complete all as specified and directed.

BLANK

Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing, complete all as specified and directed.

Descripition all as per item No. 44 above but 20 mm bore, complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 Sqm and not exc 4 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down cement plaster, terrazzo, grit plaster dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed.

S & F for Factory made UPVC (white/Off White colour casement (Openable) Door made of extruded profile members with wall thickness of 2.3mm (1-0.2mm). Door profile members with hollow section with multi chamber. Frame (60mm x 60mm), sash bars (60mm x 110mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitered cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 to 0.02mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and S.S wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and as directed. (Note: The unit rate quoted by contractor includes cost of glass, hydraulic door closure, lock and includes all other connected accessories. Net opening will be measured for payment purpose.)

S&F Aluminium alloy powder coated standard hollow section, for ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Make 'Rajshree or equvelent "

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and both side laminated with 1mm thick plywood, fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 3 Nos stainless steel butt hinges of size 100mm, 2 Nos 150mm long stainless steel tower bolt and 01 No 250mm long sliding bolt of all as per direction of Engineer-In-Charge.Make 'Rajshree or equvelent "

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, including 3 nos 75mm long ss butt hinges, 2 nos aluminium handle150mm long and 2 no aluminium tower bolt 150mm long in each shutter complate all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

M & L for fabrication & fixing to horizontal & vertical shelves/ partitions /sides/ top/ bottom/back/ front sides etc for cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with white/ coloured laminated on both sides, of approved quality including paste to all exposed edge by Banding Tape including provision of drawers etc complete all as specified and as directed. (Make :Action tesa or equivalent)

S & F soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich/IPSA).

S & F Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed.

S & F 150 mm size designer door handle stainless steel chromium plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, including demolition of old brick work, complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for RCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for RCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) as chajjas, complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L 16-18 mm thick granite (Type, Size and colour as approved by GE and as per site requirement) of any type work table rubbed and polished as in floors, wall, steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching, moulding and polishing.

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in sub base of floor, complete all as specified and directed.

M & L for Non skid coloured ceramic tiles light shade 8-10mm thick square/rectangular) polished, area of each tile n exc 0.16 sqm but n exc 0.36 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M & L for Vitrified coloured tiles dark shade 8-10mm thick (square/rectangular) polished, area of each tile exc 0.42 sqm but n exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L Rendering 12 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) and finished even and smooth without using extra cement, complete all as specified and directed..

M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement, complete all as specified and directed.

M&L Rendering 10 mm thick in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement.

S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

Description all as per item No 77 above but 20 mm bore, complete all as specified and directed.

S&F white colour Rotational moulded polyethylene water storage tank 1000 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

S&F 15 mm dia brass chromium plated central hole basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair. (Make Jaquar Florentine FLR-CHR 5273UPR, Pearl GPR-884, Cera F1017401)

S&F CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule (make: Cera cat no F1015151, Jaquar cat no continental CON-CHR-047 KN, Pearl cat no ARI-003 )

S&F in repair Stainless steel grating 125mm dia with canter hole of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.

S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 60mm bowl size 410mm x 330mm x 160mm including suitable pvc flush pipe ,Complete all as specified and directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,including suitable pvc flush pipe Complete all as specified and directed.

S & F of stainless steel plate rack of size 758 mm x 600 mm including shelves rod to put plates etc, made out of 0.8 mm thick stainless steel sheet, complete all as specified and directed.

S&F in repair UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

M&L Cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone agg) as in roof kerbs, coping, incl form work, complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.

M & L for preparation of new plastered surfaces of internal wall/ceiling and applying 2 coats of Internal acrylic paint of Dr. Fixit Sureseal or equivalent of Asian Paints or Berger over and including 2mm thick wall care putty and coat of primer complete all as specified and as directed.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 2mm thick wall care putty complete all as specified and as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in soft/ loose soil.

M&L for PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in foundation, filling in mass concrete, complete all as specified and directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing MH cover of any type complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) ty C-2 (using 40mm graded stone aggregate) for 300mm dia pipe.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material (Soil) not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point

S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge .

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair fancy type stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) and including dismantling of existing plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confrming to Fe 410 -W (Gde E- 250) quality A complete all as specified and directed

Dismantling timber scantlings , posts, rafters, purlins etc 40 sq. cm and over in section, in anyposition, complete all as specified and directed.

Dismantling timber scantlings , posts, rafters, purlins etc under 40 sq. cm in section, in anyposition, complete all as specified and directed.

M & L for coloured vitrified tiles light shade of size 600 x 600 x 8-10mm thick as in floor over and including 15mm thick screed bed 1:6 in cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M & L for two coat of oil bound distemper, using roller brush, including prepration of any type of old/new surface of walls, pillers, cornices , platered/ unplastered , cement concrete etc including 2mm thick wall care putty, complete all as specified and directed.

BLANK

M & L for Machine pressed prepolished precast concrete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path including 50 mm thick sand bedding layer complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation etc, complete all as specified & directed

S&F steel work in tubular trusses, doors, posts etc incl special shaped washer etc complete using ERQ or induction butt welded tubes comforming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F Mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long complete all as specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surface of any description over 10 cm width or girth complete all as specified and directed.

M&L for brick work with sub class 'B' bricks half brick thick straight or cruved on plan to any radius built in cement mortar (1:4) complete all as specified and directed.

M&L rendering 5 mm thick in cement plaster in cement mortar (1:4) mixed with intergral water proofing compound @3% by wt of cement over and incl 10 mm thick backing coat in cm (1:4) on fair faces of brick work or concrete surface complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.

M&L for OUT DOOR coloured ceramic heavy duty tiles 10 to 15 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as spfd & directed.

M&L hard core broken stone gauge not exe 63 mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete.

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc (to be measured separately) and making good the disturbed surface all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet for fixing modular switches/sockets/fan regulator etc complete all as directed

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

Description all as per Srl Item No 124 here-in-before but with 4 sqmm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent.

S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent.

S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent.

S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent.

S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

Modular Step Fan regulator, 120 watts single / double module, fixed in repairs, complete all as specifed and as directed.

S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 10 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

Taking down ceiling fan/ Exhaust fan any size sealing cable end, dismentling blades and kept in MES store yard. complete all as specified and as directed.

S&F BLDC (Brushless Direct Current) Ceiling Fan ( energy efficient), 1400 mm with IR Remote controlled also suitable for regulator, opertaing voltage 220V, minimum air delivery 265 cmm class of insulation 'F' having full copper motor winding & ribbed 3 Nos A/M blades making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.The fan shall have BEE 5 star rating and service value more than 7.1. the fan shall have CA no. and MES office details as provided by Engineer-in-charge i.e."Military Engineer service, AGE(E/M), GE (East) Delhi Cantt, CA no........" permanently embosed on the side of the fan facing the ceiling. Make-Havells/ Atomberg/ Crompton and Goldmedal.

M&L Sub main wiring with 2 run of 6.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 6.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.

M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.

S & F Exhaust fan upto 300 mm sweep metalic body type and making all electric connections including depositing the old U/s item to MES store yard, fixed in repairs, complete all as specifed and as directed.

S & F Exhaust fan upto 450 mm sweep metalic body type and making all electric connections including depositing the old U/s item to MES store yard, fixed in repairs, complete all as specifed and as directed.

S & F of rigid non metallic PVC conduit 25mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts saddles, pipe hook etc. complete including cutting chasis in wall and making good the surface complete all as specified and as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S&F MCCB 3 Pole, 100 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 12 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F of MCB SPN B Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed.

Supply and fix in replacement of Modular AC 25 Amp SP mini MCB, 230 Volts, 50 Hz suitable for module sheet complete all as specified and as directed.

Taking down water heater (Geyser) 25/35/50 ltre capacity, and depositing to MES store yard.complete all as specified and as directed.

S&F electric water heater of capacity 25 litre, vertical storage type, steel inner tank with glass linen 5 star rating, withstand 8 bar pressure complete with all accessories such as heating element, pressure relief check safety valve, thermostat, connection piece, 3 core wire with plug etc all as specified and as directed.

S&F electric water heater of capacity 50 litre, vertical storage type, steel inner tank with glass linen 5 star rating, withstand 8 bar pressure complete with all accessories such as heating element, pressure relief check safety valve, thermostat, connection piece, 3 core wire with plug etc all as specified and as directed.

S&F Steel fastner of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

Supply and fixing of steel wired connection 600mm long and C P brass adopter 15 mm dia with washer for hot and cold water from geyser and to withstand 8 bar pressure of water complete all as specified and as directed.

S&F of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed.

Supply and fix of light grade Galvanised mild steel pipe 50 mm bore complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable proction .

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

sunil traders (BID ID -3479688)

Gaurav India Corporations (BID ID -3478841)

M/s Durga Traders (BID ID -3479701)