CONSTRUCTION OF PUBLIC DISTRIBUTION SHOP AT ANNANAGAR VILLAGE IN PULUTHIPATTI PANCHAYAT

Amount

CONSTRUCTION OF PUBLIC DISTRIBUTION SHOP AT ANNANAGAR VILLAGE IN PULUTHIPATTI PANCHAYAT

Earth work excavation for foundation in all soils and sub soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Supplying and filling foundation and basement with filling sand layers not more than 15 cm thick, well rammed, watered and compacted complete complying with standard specification.

Cement concrete 1 : 4: 8 mix using 40 mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick compacting etc., complete complying with standard specifications and as directed.

Brick work in CM 1 : 5 mix using country bricks ground mould of size 23 x 11 x 7 cm for the following including curing etc., complete complying with standard specifications.

Supplying and fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specification.

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid).

Footing, Plinth Beam, etc.

Plain surfaces such as roof slab, floor slab, beams, lintels, loft, sill slab, staircase waist, portico slab and other similar works.

ReinforcedCement concrete 1 : 1 ½ : 3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of Reinforcement and fabrication charges, centering and shutting but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1 : 3, 12mm thick extra as directed by the departmental officers etc.,

Granolithic floor top finishing with CC 1 : 2 : 4 , 40mm thick including cost and conveyance of all materials to site and labour charges etc., complete

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight.

Paving the floor with Anti skid tiles of any colour and any size laid in CM 1:3, 20mm thick. And pointing with white cement 0.4 Kg per Sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers.

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution.

Plastering with CM 1 : 3, 10mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats over new iron works such as steel door, windows, ventilators, window bars, balustrades etc., with best approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmen

Plastering with CM 1:5, 12mm thick o including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Painting two coats with approved emulsion Paint over one coat of Primaring coat of emulsion Paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. (S.I No. 359 B)

Supply and fabrication of the following rolling shutters including cost and conveyance and all charges etc.

Supplying and fixing PVC sliding door with Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets.

Supply of Europian Water Closet

ELECTRICAL ARRANGEMENTS

Wiring with 2x2.5 sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for cocealed Light point/fan point (5 points per coil) [ SD No. 26 ]

Wiring with 2x2.05 sqmm PVC unsheathed SC Copper conductor of 650 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin- non inter locking CS plug Including pin top with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug Point [SD NO 36 ]

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End SD - 525

Supplying and run of 2 Nos of 6 Sqm.Pvc insulated/PVC Sheathed SC Alucadle of 1100 V Grage on Bearer wire for Service Connection Mains From metre board (SD No.65)

Supply and fixing of 4' 18W Crystal Glass LED Tube Light Fitting

Supply and fixing of AC Ceiling Fan Complete 1400 mm (56") Sweep with 300mm Down Rod (without Regulator) SD -467

SD - 126 Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 1Nos. 32A fuse unit (500V) 32A neutral link and earthlink (1"x1/8"copper flat) on TW plank of size 600mmx450mm x19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection

WATER SUPPLY ARRANGEMENTS

32 mm dia PVC Pipe

25 mm dia PVC pipe

Earth work excavation and depositing on bank with in initial lead lift in Hg soil for foundation etc. complete.

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Supplying and fixing in position PVC Screw Down Tap Heavy Type 20mm dia

Supply and delivery and fixing of 500lit White tank

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

P ARUMUGAM (BID ID -1294686)