CERTAIN REPAIRS TO BLACK TOP ROADS AT TB-2 UNDER AGE B/R (P) IN GE (C) KIRKEE

Amount

M&L for repairs to pot holes, any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to atleast 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc. 50mm and n. exc 100mm deep and in area n. exc 400 sqm and removing unserviceable material outside MD land complete all as specified and as directed.

M&L 150mm thick (compacted thickness) WBM in two layers of 75mm each, with granite, trap or basalt aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to required gradient and camber using 8 to 10 tonne power roller complete all as specified and as directed.

Ditto all as per item no. 3 here-in-before but except material. Note: Serviceable material obtained from item No 2 shall be used under this item.

M&L for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer using paving bitumen RS-1 @ 10kg per 10 sqm all as specified and directed .Make-HINCOL or equivalent

M&L for premixed bituminous macadam with binder content (VG-30) @ 4% by weight of total mix(Job mix) laid/rolled with 8 to 12 tone power roller and vibrating roller and compacted to required gradient and camber (consolidated thickness 75 mm or less as per site requirement) complete all as directed. Note;- The contractors quoted rates shall be deemed to include the following elements. (i) The contractors shall got the mix design done through Govt approved lab and same shall be got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle Number

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat paving bitumen RS-1 @ 5kg per 10 sqm with sprayer over existing surface etc all as specified and directed by Engineer-in-Charge

M&L for bituminous premix asphaltic semi dense concrete 25mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen of Grade VG-30, laying with mechanical paver, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller and vibrating roller etc all as specified and derected. Note;- The contractors quoted rates shall be deemed to include the following elements. (i) The contractors shall got the mix design done through Govt approved lab and same shall be got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle Number.

S & F Cat Eyes lastic "Glass Beads reflector made of body material -ABS plastics size 90x110mmx23mm ,reflectors 19 or 21 B1 convex glass elements on each sides with compressive strength up to 35 tons, colour of boby yellow with white reflector including fixing with epoxy adhesive all as per manufacture instructions complete all as specified and as directed MAKE -3d/DARK EYE /stp as approved by GE

S & F Yellow black ABS Plastic Road speed breaker size (L 250xB365xH50mm) including fixing with epoxy adhesive all as per manufacture instructions complete all as specified and as directed MAKE -3d/DARK EYE /SS & WW as approved by GE

M&L for preparation of new or previously treated road black top surfaces of road and applying 2.5 mm thick retro reflective thermoplastic road marking paint @ 250gm/Sqm as lines, dashes arrows, letter etc on road, pavement and the liken exc 10 cm width, by mechanical machines i.e. dispenser machine white or golden yellow as per IRC pattern including cleaning of road surface free from dust & moisture complete all as per specified and as directed . Make of paint: CMS Bombay,Shivalik Prime Chandigarh/Ritco/Merrut/SN Industries-Delhi as approved by GE

S & F Amber & Red Solar studs including fixing with epoxy adhesive all as per manufacture instructions complete all as specified and as directed MAKE -3d/DARK EYE /SS & WW as approved by GE

Sunshine Ventures

MOHANLAL MATHRANI CONS. PVT. LTD.

M/s ESS KAY Construction