Special repair and replacement of old rusted pipe line under zone II area and execution of certain Minor revenue work of water supply under GE(S) Jaipur

Amount

09/SR(M&O/61SA/Q3W/20-21 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil including trimming sides and bottoms of trenches complete all as specified in any type of soil. 09/SR-500 08/SR-575 11/Min-30 22/Min-50 23/Rev-50

Returning filling in including spreading watering and well ramming in layers not exceeding 25 cm thick each in soft/loose soil complete all as specified. 09/SR-475 08/SR-525 11/Min-25 22/Min-30 23/Rev-30

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified. 09/SR-25 08/SR-50 11/Min-05 22/Min-20 23/Rev-20

Taking up or down old unsv steel tubing and connections from walls and ceilings trenches, under floor or road, complete all as specified and directed of following sizes :-

15 mm bore of pipe 09/SR-200 08/SR-200

20 mm bore of pipe 09/SR-275 08/SR-250

25 mm bore of pipe 09/SR-150 08/SR-150

40 mm bore of pipe 09/SR-90 08/SR-100

50 mm bore of pipe 09/SR-180 08/SR-200

80 mm bore of pipe 09/SR-330 08/SR-250

M&L for tubes "medium grade " galvanised ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors/trenches of the following sizes - Make SURYA PRAKASH/JINDAL/SWASTIK/OSWAL

15 mm bore of pipe 09/SR-200 08/SR-200 11/Min-200 22/Min-150

20 mm bore of pipe 09/SR-275 08/SR-250 11/Min-100

25 mm bore of pipe 09/SR-150 08/SR-150 22/Min-175 23/Rev-90

40 mm bore of pipe 09/SR-90 08/SR-100

50 mm bore of pipe 09/SR-180 08/SR-200 23/Rev-150

80 mm bore of pipe 09/SR-330 08/SR-250

Construction to brick masonary valve pit/ chamber of under mentioned size (internal dimensions) and including necessary excavation and earth work, PCC, Plaster in CM 1:6 on inside and out side (above ground ), angle iron frame 40x40x5mm size including fabrication work, hold fast, MS sheet cover 3mm thick, duly painted with one coat of black bituminous paint of approved quality, handle and locking arrangements complete all as specified and directed :-

900 x 900 x 900 mm 09/SR-02 08/SR-03

600 x 600 x 600 mm 23/Rev-01

Supplying, laying, jointing and testing 100 mm ductile iron pressure pipe centrifugally cast ISI marked with socket and spigot ends with all fittings & jointing materials conforming to IS 8329/2000 standard length , of K7 specification with out zinc coating laid in trenches, under floor,road etc of following sizes incl taking out :- Make-Jindal/Electrosteel 09/SR-500 08/SR-550

M & L for sluice valves of undermentioned type,size and class with cast iron body with forged brass spindle, non rising type and cast iron wheel head, both ends flanged, IS-14846 marked comlete with neoprene rubber gasket ,jointing material and incl nuts/bolts/washer of suitable size etc including taking out complete all as specified and directed :- Make - Kirloskar/L&T/BIR

80 mm bore, class PN 1.0 09/SR-03 08/SR-02

100 mm bore, class PN 1.0 09/SR-03 08/SR-03

Supply and fixing in repair MS saddle piece made out of MS flat iron 50x6mm complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe complete with MS nuts, bolts, washers (02 Nos) and rubber packing for branch connection complete for following sizes of pipe :-

100mm bore. 09/SR-25 08/SR-20

80mm bore. 09/SR-20 08/SR-18

Cutting of CI/DI pipes in position for insertion of new tees, branches etc of size 100 mm bore. 09/SR-04 08/SR-04 23/Rev-01

M & L for Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed size 50 mm bore of pipe including taking down. 09/SR-10 08/SR-10 23/Rev-04

M & L for Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed size 25 mm bore of pipe including taking down. 09/SR-35 08/SR-40

M & L for Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed size 20 mm bore of pipe including taking down. 09/SR-35 08/SR-40

M & L for non return valve of undermentioned type,size and class with cast iron body with both ends flanged, IS-14846 marked complete with neoprene rubber gasket ,jointing material and incl nuts/bolts/washer of suitable size of 100 mm etc including taking down complete all as specified and directed. 09/SR-03 08/SR-03

S&F ball brass valve high pressure with ploythene float and fly nut complete of size 20 mm dia screwed both ends to iron pipe. 09/SR-55 08/SR-50

M&L ductile iron fittings, IS-1538 marked viz bends, tapers, reducers, tee pieces (single or double branch) any type, angle / radius and straight connecting pieces, but all ends flanged, size of pipe upto 150 mm bore, complete all as specified. 09/SR-550 08/SR-500

Material and labour for cutting of bituminous road or any type of floor for laying of pipe not exceeding 1.5 mtr deep including refilling with material and watering well ramming/compacting and making good with PCC 1:2:4 type B-1, 10 cm thick complete all as specified and directed. 09/SR-24 08/SR-24 11/Min-08 22/Min-06 23/Rev-12

S & F in repair detachable joints suitable for GI/CI/DI pipe complete with cast iron ring , rubber rings nut, bolts, excavation and earthwork, cutting of pipe etc of following sizes complete all as specified and directed .

50 mm dia 09/SR-22 08/SR-20

80 mm dia 09/SR-30 08/SR-30

100 mm dia 09/SR-30 08/SR-30

M&L for boaring with 100 mm dia of existing road/path in Army Road for laying of GI pipe /DI Pipe including making good distrubed area/surface all as directed by Engr in charge. 09/SR-12

08/SR(M&O/61SA/Q3W/20-21` M&L for boaring for upto 150 dia in existing Civil road/path for laying of GI pipe /DI Pipe including making good distrubed area/surface all as directed by Engr in charge 09/SR-30

11/MIN/61SA/Q3W/20-21 Ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed of 15mm size 11/Min-15 22/Min-06

PVC connections 15mm size with PTMT nuts of length 450mm

22/MIN/61SA/Q3W/20-21 Cutting of GI pipes in position for insertion of new tees, branches etc of size 50mm bore.

M & L for Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of the following size

25 mm bore 22/Min-06 23/Rev-02

15 mm bore 11/Min-15 22/Min-06

S & F PVC connections 15mm size with PTMT nuts of length 300mm.

23/Rev/61SA/QW/20-21 Supply, connect, testing and commissioning centrifugal pump set 2/3HP suitable for 230V single phase having capacity 175 LPM at 27 mtr head with suitablecapacity of motor with cast iron body and GM/SS impeller incl making and fix with suitable size PCC foundation with nut bolts complete and connecting to pipe line and electric connection complete all sd specified and directed. Make Kirloskar,KSB, Crompton.

S&F of starter 3 HP (MU-2P) in MS Sheet power coated enclosure 230 V single phase complete all as specified and directed. Make L&T Cat Part No CS-90319KODO or equivalent.

M& L for non return valves 50 mm dia size with brass body with screwed both ends for jointing iron pipes, ISI marked complete all as specified and directed.

M& L for non return valves 25 mm dia size with brass body with screwed both ends for jointing iron pipes, ISI marked complete all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 vots grade, cross sectional area 6 sqmm 2 core.

S.R.Enterprises

SM CONSTRUCTION COMPANY

M/S Anil Enterprises

M/S TRADE LINKERS