GE863/EWS-T-18 OF 2023-24

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard and dense soil., complete, all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete, all as specified and directed.

Excavating in trenches, n. exc 1.5 m wide and exc 1.5 m in depth but n.exc 3 m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc,. n exc 10 sq m on plan and getting out in hard/dense soil, complete, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete, all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6), complete, all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding exc. 0.06 sqm but n.exc. 0.11 sqm, in floors etc. Set over and including 15 mm thick screed bed in cement mortar (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed.

M&L for 300x200x7/450x300x7mm thick glazed coloured ceramic tiles as in dado etc., incl 10mm thick back coat in cement Mortar (1:4) , set and jointed in neat cement slurry and pointed in coloured cement with pigment to match , complete, all as specified and directed.

M&L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate, as in foundation, filling in mass concrete etc, complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete, all as specified and directed.

M&L precast PCC (1:3:6) type, C1 using 20mm well graded stone aggregate as in bond stone, set in cement mortar (1:6), complete, all as specified and directed.

M &L for pre-cast cement concrete, type C1 (1:3:6) using 20mm well graded stone aggregate, as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:4), complete, all as specified and directed.

M&L for PCC (1:3:6), type C-1 using 20mm well graded stone aggregate for coping, parapaet, thrust block and other similar items, complete, all as specified and directed.

M&L plain cement concrete type C-1 (1:3:6) (using 20mm graded stone aggregates) as in plinth protections, 75 mm thick , finished even and smooth without using extra cement , with joints 10 mm wide and in full depth at corners and @ 3.metre centre to centre, filled with mastic mortar , complete, all as specified and directed .

M & L for RCC (Nominal Mix) 1:2:4 type B-1 ( 20 mm well graded stone agg ) as in beams , cantilevers, bressummers, lintels etc, complete, all as specified and directed

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete, complete, all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.

Material and labour mild steel TMT bars, 6mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and as directed by the Engineer-in-Charge.

S&F mild steel , Fe-410-W(Gde- E-250) quality-A as in roof trusses (framed) , trussed, purlings, crane gantries, rails and fasenings and heavy bracket framing (Beam , tee, angle ) channel or flat sections ) including distance pieces , cleats, complete, all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete, all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick , of any colour , having tensile strength of 550 Mpa , as in roof covering and cladding to wall etc., fixed with self tapping screws, complete, all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick , of any colour , having tensile strength of 550 Mpa, as in ridge, valley,flashing, gutter and cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

Hardcore of broken stone or boulders of gauge n.exe 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick each layer , watered and rammed to a true surface, complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2, using 40mm well graded stone aggregate as in surface/sub base of flooring etc , complete, all as specified and as directed.

M&L for 25mm thick cement concrete, type B-0, (1:2:4) using 12.5mm well graded stone aggregate) as in levelling course of flooring , complete, all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on concrete block masonry finishing even and smooth without using extra cement, complete, all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:6) on concrete block masonry finishing even and smooth without using extra cement, complete, all as specified and directed.

M&L for renderning 15 mm thick in Cement Mortar (1:4) on stone masonry surface and finshed even and smooth without using extra cement, complete, all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of alkali resistant primer, complete, all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coat of white wash on walls, complete, all as specified and directed.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth, complete, all as specifed and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer ,as in soil, complete, all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point, complete, all as specified and directed.

Supply and fixing for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed.

M&L 35mm thick 2nd class hardwood plain framed panneled shutter with lock rail and panel of 9mm BWP commertial ply or 12mm veneered partivle board with commercial veneering on both faces. The size of rail and dtiles as per IS-1003 (Part-1) klin seasoned and chemically pressure treated, complete, all as specified and directed.

S&F MS barrel tower bolt of 100mm long, stove enamelled black with bright bolt, complete, all as specified and directed.

S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on couple plate and fixed, complete, all as specified and directed .

S & F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

S&F MS pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter, complete, all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete, complete, all as specified and directed.

S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete, all as specifed and as directed

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

Material and labour for machine cut kota stone slab 18-20 mm thick , laid in flooring and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 20mm thick in cement mortar (1:4) base , complete all as specified and as directed ..

Material and labour for machine cut kota stone slab 18-20 mm thick, laid on vertical surface and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting etc., over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces complete, all as specified and as directed .

M&L PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement, complete, all as specified and directed .

Supply and fixing first quality , water closet (squatt pattern) including foot rest , vitreous china (white) ,first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet , complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed.

Supply and fix PVC low level, white, flushing cistern, valve-less, symphonic action type, 10 litres capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connection to water supply pipe line and WC, complete all as specified and directed.

S&F Vitreous China urinal flat back size 465x355x265mm white with grating and union for discarge pipe complete incl fixing plug, bedding , urinal against wall in cement mortar (1:2 ) securing urinal to plug pointing around back in cement fixing autometic flushing cistern with bracket flush pipe grating and union for discharge pipe etc, complete, all as specified and directed.

S&F first quality , Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete all as specified and directed.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete, all as specified and directed.

S & F 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.

S&F grating square 150mm of PTMT (Minimum weight 100 gms), complete, all as specified and directed.

S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall, complete, all as specified and directed

S & F angle stop valves with flange, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule , complete all as specified and directed .

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘triple layered’,white/Black colour with screwable lid, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete, all as specified and directed.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions , complete, all as specified and directed.

S&F 15 mm dia Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed to pipe, complete, all as specified and directed.

Supply, laying, jointing and testing of 150 mm bore ,class ‘A’ ,salt glazed stone ware (SGSW) drain pipe with fittings laid in trenches, jointed in cement mortar (1:1) including PCC (1:4:8) type D-2, (using 40mm well graded stone aggregate) as in bed of drain for 150mm bore pipe incl packing under , and haunching against the sides of the pipes after they are laid in and tested, complete, all as specified and directed.

S & F PVC (SWR ), pipes of 110 mm dia single socketed , in any length with rubber ring joints , laid in trenches or in floor, complete, all as specified and directed .

M & L for providing pre-cast Reinforced cement concrete as in landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar (1:6), complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark, fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch, complete, all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl stove enamelled steel conduit with accessories having ISI mark concealed including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc all as specified for one light point/ fan Bell point controlled by one switch, complete, all as specified and directed.

All as per Srl item No 63 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 4 Sqmm, complete, all as per specified and directed.

Supply and fixing of switch piano type 5 Amps, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply and fixing switch piano type 15 Amps, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply and fixing socket outlet ,multipin , 15 Amps, 2-in-one , 230 Volt flush type, complete, all as specified and directed.

Supplying and fixing the ceiling rose, three terminal ISI marked surface backlit, complete all as specified and as directed by the Engineer-in-Charge.

S&F LED integrated batten tube light fittings 20W, 4 Feet long complete with twin core twisted flexible copper conductor cable, complete, all as specfied and directed. Make Crompton Model -Trimline LDL-20CDL or equivalent in Philips/Bajaj / Wipro/ Havells.

Supply and fixing LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete, all as specified and directed.

Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type, complete, all as specifed and directed. Make : Crompton / Philips / wipro / Havells .

S & F LED light fitting, flame proof type ,1X10W, bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete, all as specified and directed.

Supply and Fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete, all as specified and directed. Make Sudhir or equivalent as approved by GE

Supply and fixing of MCBs Distribution board , sheet metal enclosure, SPN 240 Volts , 04 ways with 200 amps rated bus bar , double door for MCBs, ,with IP 43 protection ,complete all as specified and directed.

Supply and fixing, in replacement of MCBs , SPN , 240 Volts , 6 to 32 Amps , B curve , 10 kA , complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole , current carrying capacity 6 to 32 AMP, complete with connection testing and commissioning, complete, all as specified and directed.

S&F Sheet metal enclosure with two pin and earth plug and socket complete with one single pole and neutral MCBs 20 Amps , 10 KA, B curve, complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, frame and louvers, complete, all as specified and directed.

Supply,fixing, testing ,water heater storage type 10 litres capacity with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element of 2 KW, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety devices including provn of grouting bolts in walls including piller cock , pvc connection etc and making good disturbed surfaces, complete, all as specified an directed. Make : Crompton/Racold/Havells/Bajaj

M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified and including testing on completion. Including necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs GI Pipe of 15 mm dia of light grade for protection of earth wire, complete, all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm, complete, all as specified and directed.

Note:- The total shall subject to adjustment of credit of NIL for old Materials as per Schedule of Credit.

M/S PYARE LAL