SPECIAL REPAIRS TO BLDG NO.62 AT CQA (EW), DGQA COMPLEX UNDER AGE B/R NO-II OF GE (SOUTH) SECUNDERABAD

Amount

M& L for removal of old treatment of any description incl removing of loose concrete and roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc and applying one coat of neat cement slurry @ 3.00 kg/Sqm complete as directed

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in padding (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even with out using extra cement. all as specified and as directed. (Note : Supply of water proofing compound will be measured and paid separately) .

M&L PCC1:2:4 using B0 using 12.50 size graded stone aggregate) for coping, corner of roof and similar work complete all as sepcified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in base of water tank on roof surface complete all as specified and as directed.

M&L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm and applying APP based polymeric membrane min weighing 3.50 Kg per sqm and min 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm ) and on primed surface by forced application over the felt apply 1.20 kg hot bitumen and 0.20 kg/sqm bitumen base aluminuim paint complete all as specified and as directed.

Supply only integral water proofing compound.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove making good with cement mortar 1:3. all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.

M&L for false ceiling frame with anodised aluminium snap grid 605 x 605 mm frame work for false ceiling using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip. complete all as sepcified and directed

S&F of 4 mm thick Non asbestos fibre cement building boards fixed to Aluminium framework in ceiling with screws complete all as specified and directed

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below and above ground level all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. all as specified and as directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in sub-base of tiles and surface even and smooth without using extra cement all as specified and as directed.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick Screed bed in CM 1:4 mortar thick complete all as specified & directed.

M&L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick Screed bed in CM 1:4 complete all as specified & directed.

M&L Vitrified Ceramic tiles light shade 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and 10mm backing coat in CM 1:4 and jointed in neat slurry and pointed in white or coloured cement to match light shade coloured tiles complete. all as specified and as directed.

M&L for 10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados all as specified and as directed.

M & L glazed ceramic tiles in vetical surfaces 300mmx200mmx7mm thick set and joint in neat cement slurry and pointed in white or colour cement to match all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, roof plater etc including raking out joints,hacking for key, scrubbing down with water etc. all as specified and as directed.

M&L for 15mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement) all as specified and as directed.

M&L for rendering 15mm thick plaster in two layers (10mm dubbing coat and 5mm thick finishing coat with wpc & chicken wiremesh )in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed NOTE :- Chicken wiremesh will be measured and piad separately

S & F Chicken Wiremesh Size and dia of the wire complete all as specified and directed.

S & F Door closer hydraulically regulated alluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete.

S & F in repairs Door closer hydraulically regulated alluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete.

S&F Anodised aluminium frame for door, windows, ventilators with one or more rebates incl joining cleats and other accessories for fixing complete all as specified and directed

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised alluminium snap beading , screws, anodised alluminium fittings such as peg stays 150mm long 01 Nos, Hinges type B-21 100mm long 01 Nos, Suitable handle 01 Nos complete all as specified and directed

S&F 5.5 mm thick sheet Glass ordinaryquality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed

S&F 4.0 mm thick sheet Glass ordinaryquality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed

S&F pre-laminated particle board (12mm thick) Interior grade pre-laminated both side with decorative choice laminations fixed in alluminium door or frame work with screws or necessary fittings complete etc. all as specified and as directed.

S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F of factory made solid panel PVC door shutter Factory Made Solid PVC Moulded Door Shutter with two panel particle board core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F for 150mm long aluminium anodised barrel tower bolt of exturded section all as specified and as directed.

S & F for 150 mm long extruded aluminium alloy handles, fabricated type, anodised. all as specified and as directed.

S&F for 100 mm long stainless steel butt hinges fixed to PVC door shutter. all as specified and as directed.

S & F for 250 mm size alluminium alloy anodised , sliding door bolts with hasp, staples (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed. all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and n exc 2 Sqm each all as specified and as directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm all as specified and as directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) area n . exc 1.5 Sqm all as specified and as directed.

M&L for complete removal of existing treatment on wall and washing down with water and repair the damaged portion with birla white wall care putty as per the site requirement and applying two coats of oil emulsion distemper over a coat of primer incl preparation complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats ofApex Ultima weather proof exterior emulsion paint over a coat of primer complete all as specified and directed

M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening over 3mm thick wall care putty complete all as specified and directed

M&L for prepartion of newly plastered surfaces of walls and applying two coats ofApex Ultima weather proof exterior emulsion paint over a coat of primer complete all as specified and directed

M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks. all as specified and as directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and dhgh denscity plastic ball screwed for iron pipes and fixed to iron pipes. all as specified and as directed.

S&F Tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete including taking down GI tubing all as specified and directed .

S&F Tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore complete including taking down GI tubing all as specified and directed .

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified & directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. all as specified and as directed.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 all as specified and as directed.

M & L for 20 mm thick Granite (of any type) work (cutting and polishing the nose of the steps ( Threads must be chamfered and 3 lines has to be grooved) ,and like 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified and as directed.

M & L for 20 mm thick Granite (of any type) work in Vertical Surface incl 10mm thick Packing Coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.all as specified and as directed.

S& F of SS 304 grade 50mm dia pipe for handrails complete all as specified.

S& F of SS 304 grade 40mm dia pipe for balusters complete all as specified.

S& F of SS 304 grade 20mm dia pipe for bracings complete all as specified.

S& F for madular kitchen 710 grade marine plywood with hittich tandum boxes with soft closures and Stainless steel handles and soft draw channels inner 8mm thick and 1 mm thick laminate glossy or mat finish with stainless baskets for kitchenware all as spd and directed

S& F in repair of 6mm Thick mirror with Bevelled edge plain along with studs complete as specified and directed

S & F in repair wash down water closet incl flush (pedestal pattern) of size 65.5x 38.5 x 76.5 cm white EDGE (S-220) * complete incl all fitting & fixtures complete all as per cat No Cat no : 92562 S-220 of make Hindware or equivalent make as given at list of makes in PS

S & F in repair Urinal Complete set incl all fitting & fixtures complete all as specified and directed (Cat no : 96008 of make hndware or equivalent make as given at list of makes in PS

S & F in repair Optra Counter Top Basin of size 57 x 48 x 21 cm along with pillar tap, stop cock, pvc connection waste pipe and all fitting & fixtures complete all as specified (Make : Hindware Cat no : 91008 or equivalent make as given at list of makes in PS

S & F in repair Wash Basin with Pedestal Complete set incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : 10098 or equivalent make as given at list of makes in PS

S & F Bip cock cromium plated complete all as specified (Make : Hindware Cat no : F320004 or equivalent make as given at list of makes in PS

S&F in repairs, CP health faucet with 01 mtr tube and hook complete all as specified and directed. Make :- Cat No ALD-579 of Jaquar or equivalent make of Prayag/MARC as approved

S&F two way bib cock 15 mm dia chromium plated complete fancy type of branded as specified and directed.'

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm all as specified and as directed.

S&F in repairs stop cock chromium plated 15 mm dia complete all as specified and directed;

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type). all as specified and as directed.

S & F Angle cock fancy type brass chromium plated screwed one ends for iron pipe or for unions and fixed 15mm dia pipes, complete all as specified and as directed.

S&F in repair Chromium plated Grating doom 150 mm size complete all as specified and directed;

S & F Towel rail 600mm long cromium plated incl all fitting & fixtures complete all as specified and directed

S & F Stainless Steel Curtain rod 25mm dia along with knobs & brackets incl all fitting & fixtures complete all as specified and directed.

M&L for 75mm thick PCC type C2 1:3:6 (20mm graded aggregate) as in path/plinth protection etc laid in pannels including finished the surface smooth and even without using extra cement all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/ power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified

Taking down the existing unserviceable main switch/cut out/DBs of any type /capacity /description as existing at site including making good the disturbed surfaces to match with the existing finishes all as directed.

M & L for point wiring in concealed conduit in wall with 1.5 sqmm copper conductor single core PVC insulated FRLS 1100V grade multistranded drawn through conduit and including regid PVC conduit and conduit accessories of suitable dia medium grade with suitable modular flush metal GI box, modular inner plate & cover plate to fix modular switch, modular inner plate & cover plate to fix modular switch, modular fan regulator and modular socket etc as per site requirement including running up of 1.5 sqmm copper conduct PVC insulated cable as earth continuity conducor along with wiring and connecting to the common earh dolly for fixing the modular switchews/sockets/reulators etc all as specified for :

(a) One light point controlled by one, one way switch 5A, SP

(b) One ceiling /wall fans/exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independend board

(e) One bell point control by one way switch 5 amps

(f) One light point control by 2 way switch

Description all as per item No 85 here-in-before but using 4.0 sqmm single core copper conductor cabe of multistranded PVC insulated FRLS 1100 volts grade for industrial plug socket point including running of 4.0 sqmm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Supply & Fix Metal Clad Socket 3 Pin industrial type with plug top and MCB SP 25 Amps all enclosed in sheet metal enclosure, complete all as specified and directed

S & F Modular switch 1 way 6 A, 1 Module 230 volts.

S & F Modular switch 2 way 6A, 1 Module capacity 230 volts.

S & F Modular Socket, 6A-2/3 combined 2 module of capacity 230 volts

S & F Modular switch socket 3 pin 5 Amps flush type

S & F Modular switch socket outlet multipurpose 3 pin 15 Amp and one pin 5 Amp controlled by one switch

S & F Modular white cover plate with frame of 3 module

S & F Modular white cover plate with frame of 4 module

S & F Modular white covr plate with frame of 6 module

S & F Modular white cover plate with frame of 8 module

S & F Modular metal flush box of 3 Module

S & F Modular metal flush box of 4 Module

S & F Modular metal flush box of 6 Module

S & F Modular metal flush box of 8 Module

S & F Modular bell push 6A 1 Module

S & F Bell Ding dong AC 5 Amps capacity 230 Volts SP one way flush type

Supply & Fix Modular ceiling fan regulator 5 stepped type heavy duty, 2 module step type AC 240 Volts suitable for 1200/1400 mm sweep complete all as specified and directed

M&L for point wiring surface/concealled conduit on wall with 1.5 sqmm copper conductor single core PVC insulated FRSL 1100 Volts grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS, duly painted with red oxide metal primer including fixing/grouting sunken/surface as per site requirement covered with 3mm thick laminated sheet incuding running up of 1.5 sqmm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connected to the common earth dolly for fixing the switches/sockets/regulators etc all as specified for :

(a) One light point controlled by one, one way switch 5 A, SP

(b) One ceiling fan/exhaust fan point controlled by one, one way switch and regular

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

Description all as per item No 104 here in before but using 4 sqmm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for industrial plug socket point including running 4 sqmm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the commong earth dolly

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts complete all as specified and directed.

Supply and fix switch socket combination flush type multipurpose 2/3 pin 5 Amps, 230 volts complete all as specified.

S&F swich socket combination 2/1 multi purpose 3/5 pin 5/15 Amps flush type, 230 Volts all as specified.

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts all as specified

Supply and fix switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified.

S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 X 50 mm complete all as specified and directed

S&F electronic dimmer, 450w, 250 Volt flush type on the existing phenolic laminated sheet all as specified and directed

S & F lamp holder insulated body surface bakelite with back plate suitable for angle/batten fittings complete all as specified and directed

S & F wall mounted LED batten box type of 20 watt with LED lamp, extruded aluminium heat sink provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed

S & F 34 /36 Watt aesthetically disigned soft light and glare free symmetrical illumination luminaire (2x2) Flat Panel suitable for armstrong/grid ceiling with high brightness white LEDs complete all as directed

Supply & fixing round shape 10 watt LED down lighter recess mounted pressure die cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficent heat dissipation and separate replaceable electronic driver complete all as specified and directed

S & F Vertical type TPN DB 4 way double door with incoming as MCCB TP 415 Volts AC 3 phase 50 Hz with fixed magnetc setting for current rating of 125 Amps 25 KA (MCB TP confirming to IS 13947 (P-2) IEC:947) made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accommadated suitaby in a MS enclosure made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting by red-oxide one coat and powder coated all as directed

S&F sheet metal enclosure MCB DB SPN 8 way DB with 200 Amps rated bus bar 240 volts with flush type locking system complete all as specified and directed

Supply & Fix MCB SPN 240 Volts suitable for fixing on MCB DB's of capacity 5-32 Amps 10 KA breaking capacity complete all as specified and directed

Supply & Fix MCB SP 240 volts suitable for fixing on MCB DB's of capacity 5 to 32 Amps 10 KA breaking capacity complete all as specified and directed.

M&L for sub main wiring with two runs of single core 10 sq mm PVC insulated FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of medium grade of 25 mm dia including one run of single core 10 sq mm PVC insulated unsheathed multistranded 1100 Volts grade copper conductor cable as earth continuity conductor alongwith the wiring and connected to common earth dolly including removing the existing unserviceable submain wiring and making good the disturbed surface to match with the existing surface complete all as specified and as directed. Note : 2 runs of 10 sq mm cable, one run of 10 sq mm earth continuity conductor and one run of conduit shall be measured as one unit length.

M&L for sub main wiring with two runs of single core 4 sq mm PVC insulated FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of medium grade of 25 mm dia including one run of single core 4 sq mm PVC insulated unsheathed multistranded 1100 Volts grade copper conductor cable as earth continuity conductor alongwith the wiring and connected to common earth dolly including removing the existing unserviceable submain wiring and making good the disturbed surface to match with the existing surface complete all as specified and as directed. Note : 2 runs of 4 sq mm cable, one run of 4 sq mm earth continuity conductor and one run of conduit shall be measured as one unit length.

S&F Exhaust fan with louver of 300 mm sweep complete and connecting up with new round flexible copper conductor PVC insulated 3 core multi stranded of size 23/0.19 from ceiling rose to Exhaust fan including dismantling and taking down the old unserviceable exhaust fan and deposit in MES store yard complete all as specified and directed . (Norte : Round flexible copper conductor PVC insulated 3 core multi stranded of size 23/0.19 from ceiling rose to exhaust fan deemed to be included in the rate quoted by the contractor).

M&L for Cutting of wall in round shape and making hole suitable for mounting of 300 mm dia exhaust fan and making good disturbed surface matching with existing colour and all including grouting of nuts and bolts all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cmx 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nuts, checknuts and washers etc., of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/main switch all as shown in Electrical Plate No.5 of SSR Part-I and connected to main switch board including excavation and earth work in hard dense soil, returning in and removal of surplus soil to a distance not exc 50m, PCC chamber in 1:2:4 Type B-1 using 20mm graded stone aggregate, 40mm thick RCC Cover in 1:2:4 type B-1 reinforced with XPM of weight not less than 4 Kg/Sqm and frame of angle iron 25 x 25 x 6 mm with lugs 2 Nos. and with 6mm dia MS bar handle made to shape, 20 mm dia light grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling, connection to test point made out of bronze/gun metal with fixing arrangement, funnel, wire mesh complete all as specified. (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5m length is deemed to be included in quoted rate.)

M/S V PRATAP REDDY

A SOMA RAJU

Himagiri Constructions

M/S B.SHRAVAN KUMAR

M/S DIVIJA BUILDERS

VACON INFRASTRUCTURES