PROVN OF WASHERMAN AND BARBAR SHOP AT MECH CAMP, SPECIAL REPAIR TO BLDG NO T-136 AND T-148 AT DTE GEN ARMY AVN RPSO COMPLEX, MINOR WORK TO BLDG NO P-43/01 URBAN VILLAGE

Amount

M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in soil incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for Hard core of gauge exc 63mm but not exc 100mm deposited spread and leveling in layers n exc 15cm thick watred and raming to a true surface complete all as specified and directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base complete all as specified and as directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete all as specified and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.

M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 13 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in footings, plinth beam and bases of columns complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in beams,lintle/plinth bands cantilevers, bressumers, lintel over 1.5m clear span supported on walls complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in columns , piers posts and struts complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed.

M & L for brick work in CM 1:6 using Sub class "B" bricks straight or curved on plan exc. 6mmean radius complete all as specified and as directed.

Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scaffolding etc, complete all as specified.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scaffolding etc, complete all as specified.

M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed.

S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm including two coat of OBD over a coat of primer complete all as specified and directed.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 2mm thick wall care putty complete all as specified and as directed.

M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings over 2mm thick Birla White/J K White wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.

S&F Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S&F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete.

S & F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement, complete all as specified and as directed.

S & F Steel rolling shutters (Gear operated)1.00mm thick with required Ball bearing for rolling shutters, including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15mm thick), anchoring rod, hasp and staple erected in position as directed complete including required bevel gear box and crank handle Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Supply and fix for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over ind including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding complete all as specified and as directed .

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified.

M & L for Vitrified coloured ceramic tiles light shade 10mm thick, square/rectangular(with pattern and boarder work as required at site), area of tiles exceeding 0.42Sqm and not exceeding 1.50Sqm each tiles as in flooring over 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match over or filling spacers as per requirement at site or as directed including designer tiles pattern work between the tiles complete all as specified and as directed by Engr-in-Charge or GE, complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4 complete all as specified and as directed.

S & F 15mm dia GI tubbing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scaffolding, cutting chases in wall where ever required etc complete, all as specified.

S & F 20mm dia GI tubbing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scaffolding, cutting chases in wall where ever required etc complete, all as specified.

S & F 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make : Jaquar/Marc/Kohler)

S & F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia PTMT float valve complete all as specified.

S & F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

S & F Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).

S & F Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed.

S & F Angle valve of CP high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F Two way Angle cock 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, complete all as specified and as directed.

S & F CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S&F 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

Fabrication & fixing of Modular wardrobe/ cupboard made out of 18-20 mm thick HDHMR boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ drawers etc. complete all as specified and as directed. (Design and pattern as approved by GE). (Make : Rajshree or equivalent)

S & F for 18-20mm thick HDHMR boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected. (Make : Rajshree or equivalent)

S & F for Continuous piano type hinges, stainless steel with width of flaps 30mm, complete all as specified and as directed.

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

S & F 50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed.

S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid over 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding/path complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed

S & F for PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished prelaminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and as directed.

S&F Soakage well of size 3.0mtr dia and 4.5mtr effective depth including excavation in any type of soil and removal of soil not exceeding 50mtr and depositing, PCC 1:3:6 type C-2 using 40mm graded curshed stone aggregate as in foundations, honey combed brick work in one brick wall in cement mortar 1:4, RCC M-25 Design mix using 20mm graded aggregate in top ring beam and cover slab, with SFRC manhole covers and intercepting chamber and screen chamber and making connections of RCC/DWC pipes and loose filling of brick aggregate of gauge 63mm, complete all as specified and as directed by Engr-in-Charge.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors in any position complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends any radius complete

S & F Stack clamps out of 50 mmx 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for bore of pipe 100mm complete.

S & F 110mm PVC (SWR) vent cowl complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radius built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F 2mm thick fibre glass reinforced translucent Plain/corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of existing sheet of any type complete all as specified and directed.

S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L Vetrified tiles (square/ rectangular) of size 600 x 600 x 10 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including cement screed bed 15mm thick in cement mortar 1:6,including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S & F for PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished prelaminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including taking down existing panelling of any type complete all as specified and as directed.

S & F in repairs Angle valve of CP high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repair Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.

S & F in repairs Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).

S & F for Full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.

S&F in repair Stainless steel Curtain Rod 20 mm dia with holders fixed to wall etc., fixed in repairs, complete all as specified and as directed.

S&F in repair Stainless steel fancy type bracket with new screws for curtain rod, fixed in repairs, complete all as specified and as directed.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings,heads,shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.

Demolition and breaking up drain pipes (SGSW/AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M & L for 300 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 300 mm bore incl forming cradles complte all as specified and directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592 including demolition of existing RCC cover of any type complete all as specified and as directed.

S & F Prelaminated particle board 18/19 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinets/shutters fixed with screws to timber framework all as specified and directed.

S & F Continuous (piano) hinges, Mild Steel, bright finish or electrogalvanised (width of flap 40mm when open) complete all as specified and as directed.

Supply only Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel basket (plain) of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only Stainless steel bottle full out of size 500mm x 400mm x 160mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

S & F for Pressed steel frames size of 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portions frame with PCC 1:3:6 type C0 using 12.50mm graded crushed stone aggregate, etc, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F for flush shutters 40 mm thick solid core constructions with block boardcore , ply wood face panels commercial type on both side complete all as specified and as directed.

S & F 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. devided into squres with sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth complete all as specified and directed.

M & L for preparation of new wooden surfaces & applying 2 coats of synthetic enemel paint over a coat of wood primer complete all as specified.

S & F 100mm size stainless steel butt hinges complete all as specified and as directed.

S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F 300mm long Mild steel sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections complete.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed/surface ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl MS Box/ Metal flush box of suitable size for fixing switches/sockets/fan regulator etc , with and including cover plates/3mm thick hylem sheet of suitable size and making good surface as original complete all as directed for the following :-

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

All as per srl item No 131 here-in-before but with 2.5 sq mm FRLS copper wire with 2.50 Sqmm FRLS copper earth wire on independent board.

S & F for switch piano, flush type single pole, one way 5 Amp complete all as directed.

S & F for switch piano, flush type single pole, one way 15 Amp complete all as directed.

S & F for of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.

S & F for of socket outlet 2 in 1, 3 pin, 5 and 15A, flush type complete all as directed.

S&F of step type Fan regulator ,120 watts, piano flush type complete all as directed.

M&L of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.

S&F in repair of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete.

Supply and fixing in replacement of LED tube light fitting, 20 watt. with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as specified and as directed.

S&F in replacement of LED bulk head fitting made of cast aluminium alloy with opal glass diffuser , complete all as specified and as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board (Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of isolator 63 Amp, SPN type with over load and short circuit protection complete all as directed.

S&F in replacement LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

Supply and fixing in replacement of security light fitting bracket, 1 mtr long made out of galvanized iron pipe of 32 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Taking out old unsv cable any size and core complete.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

S&F of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.

S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.

S&F modular Bell Push 6 Amp, flush type, complete all as specified and as directed.

S&F of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections, complete all as specified and as directed.

S&F of Modular AC Socket with 25 Amp SP mini MCB, 230 Volts, 50Hz. in sheet metal enclosure complete all as specified and as directed.

S&F in repair of Modular Telephone socket Jack 01 Module size as per site requirement, complete all as specifed and as directed.

S&F in repair of Modular TV socket Jack 01 Module size as per site requirement, complete all as specifed and as directed.

M&L in Replacement of TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit, complete all as specified and as directed.

M&L in Replacement of telephone Wiring with twin core PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in separate concealed PVC conduit, complete all as specified and as directed.

S&F in replacement of change over switch off load type, AC, 415Volts, TPN, 100 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed.

Material and labour in replacement for Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, drawn into and incl PVC conduit with fittings and 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to submain DB complete all as specified.

Material and labour in replacement for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, drawn into and incl PVC conduit with fittings and incl 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to AC point complete all as specified.

M&L Sub main wiring with 2 run of 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn into and incl PVC concealed conduit 25 mm dia with all fittings and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.-

Supply and fixing in of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing of MCB C Curve type, 10 KA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing of MCB C Curve type, 10 KA, 40 to 63 Amp, SPN with over load and short circuit protection complete all as directed

Supply and fixing of LED tube light fitting 20 W to wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as specified.

S & F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.

Supply and fixing of security light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 32 mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

M&L Anti termite treatment for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per Sqm of surface area complete all as specified and as directed.

M&L Anti termite treatment for treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square meter of vertical surface (area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L Anti termite treatment for treating the top surface of filed earth at the rate of 5 liters of emulsion per square meter of surface complete all as specified and as directed.

M&L Anti termite treatment for treating the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface area complete all as specified and as directed.

imran construction company

Vipul Construction

garnet engineers contractors