Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-Finance HIMACHAL PRADESH HP | MANDI | HIMACHAL PRADESH | 175013 | ₹5.1 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹5.4 L+₹28,550 (5.55%)Rejected-Finance MANDI DIVISION NO II HP PWD MANDI | MANDI | HIMACHAL PRADESH | 175001 | ₹5.4 L+₹28,550 (5.55%) | L2 | Rejected-Finance Rejected |
| 3 | L3₹5.6 L+₹47,750 (9.28%)Rejected-Finance | ₹5.6 L+₹47,750 (9.28%) | L3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | Ravi Rawat L1 | desh raj L2 | Sachin Chauhan L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sides and bed, stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per direction and to the entire satisfaction of the Engineer-in-Charge. | 270 | Cum | 720 ₹1,94,400 Lowest | 735 ₹1,98,450 | 745 ₹2,01,150 |
| 2.00Laying jointing in Trenches high density polythene pipe for use for buried waterman line and servises and for water supply/Irrigationabove ground both inside and out side building duly ISI marked (IS: 4984- 1995) as ammended up to date)in following grade of materials pressure rating and nominal dia complete with fitting (Earth work to be measured and paid for separetely) | ||||||
| 2.01 | HDPE pipe 40MM dia. PE 80 PN- 6 | 2,000 | Rmt | 100 ₹2,00,000 Lowest | 109 ₹2,18,000 | 115 ₹2,30,000 |
| 3.00 | Fabricated and manufacturing of common header of 50mm dia , 40mm dia & 32mm dia pipe including cutting of GI pipe of required length pipe will be closed at booth ends by welding MS Sheet of 5mm thick. There after 5 Nos. holes of 50mm, 40mm, 32mm, 25mm, and 20mm dia. with welding shall be carried out at required at required spacing in the GI pipe for commo so give the shape of Tee. One end shall beconnected to common header by electric welding & at other end socket will be welded which will be connected to the main line s well as with service line at all joints will be socketed GI Nipple, Union, tee of different dia will be provided as per site requirement. The bends of require degrees will also be febricated as per requirement of site. The flow will be regulated by providing and fixing gate valve of different diameter including testing of joints to the satisfaction of Engineer- in- charge. | 10 | Nos | 12,000 ₹1,20,000 Lowest | 12,650 ₹1,26,500 | 13,100 ₹1,31,000 |
Tender Value
₹4.6 L
EMD Value
₹9,251
Closing Date
1 Jul 2026, 11:00 amClosed
EE Rohru
JSV Division Rohru
SH RR Providing Laying and jointing of HDPE Pipe 40mm dia 2000Rmt
2026_HPIPH_137448_1
Tender/2026-2623-2660 dt. 24.06.2026
Open Tender
Civil Works
Item Rate
Rohru
tender Document
8 documents required · 8 mandatory
₹500
₹9,251
9 Sept 2026
24 Jun 2026
1 Jul 2026
24 Jun 2026
1 Jul 2026
24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sides and bed, stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per direction and to the entire satisfaction of the Engineer-in-Charge. | 270 | Cum | - | - |
| 2Laying jointing in Trenches high density polythene pipe for use for buried waterman line and servises and for water supply/Irrigationabove ground both inside and out side building duly ISI marked (IS: 4984- 1995) as ammended up to date)in following grade of materials pressure rating and nominal dia complete with fitting (Earth work to be measured and paid for separetely) | |||||
| 2.01 | HDPE pipe 40MM dia. PE 80 PN- 6 | 2,000 | Rmt | - | - |
| 3 | Fabricated and manufacturing of common header of 50mm dia , 40mm dia & 32mm dia pipe including cutting of GI pipe of required length pipe will be closed at booth ends by welding MS Sheet of 5mm thick. There after 5 Nos. holes of 50mm, 40mm, 32mm, 25mm, and 20mm dia. with welding shall be carried out at required at required spacing in the GI pipe for commo so give the shape of Tee. One end shall beconnected to common header by electric welding & at other end socket will be welded which will be connected to the main line s well as with service line at all joints will be socketed GI Nipple, Union, tee of different dia will be provided as per site requirement. The bends of require degrees will also be febricated as per requirement of site. The flow will be regulated by providing and fixing gate valve of different diameter including testing of joints to the satisfaction of Engineer- in- charge. | 10 | Nos | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.04 MB
f7and8.pdf
Tender Documents • 2.46 MB
termandcondtion.pdf
Tender Documents • 0.45 MB
BOQ_203395.xls
BOQ • 0.30 MB
f6.pdf
Tender Documents • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .