PROVN OF CERTAIN SPECIAL REPAIR AND MINOR WORK UNDER GE(AWC) MHOW.

Amount

Demolition of brickwork or stone masonary built in cement mortar including all quoins, arches,pillars etc. complete.

M & L Brick work with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/septictank /soakwell etc, in sewer work in CM 1:4 complete all as specifed and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L vitrified ceramic tiles 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed

S&F coloured glazed cermic tiles size 300x450x7 mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 on stone wall/concrete surface/brick wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water complete all as specified.

M & L for rendering 10mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, complete.finished even and smooth without using extra cement.

Material & Labour for rendering in 1 : 4 cement mortar 15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement including mixing with liquid WPC on top 5mm thick only Note :- Water proofing compound shall be paid separately

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer incl 3mm thick wall putty complete.

M & L for complete removal of existing treatment on walls and applying two coats of oil-bound distemper over a coat of primer on old plastered surfaces including necessary preparation to surfaces complete incl 3mm thick wall putty all as specified and as directed

M & L, for preperation of new surfaces of walls by washing/rubbing down and applying two coat of cement base paint white or tinted over a coat of cement base primer complete all as specified and as directed.

M & L, for preperation of old surfaces of walls by washing/rubbing down and applying two coat of cement base paint white or tinted complete all as specified and as directed.

Material and labour for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L applying three coats of white wash on new Ceiling,chajja surface including preparation of surface.

M&L applying two coats of white wash on old Ceiling,chajja surface including preparation of surface.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M&L for 80mm thick machine pressed precast interlocking paver block(glossy finished) with grey cement with pigment conferming to IS 15658-2006 of M-40 grade ,laid dry & jionts filled with fine sand and shape,colour and pattern as approved by GE,laid required colour and pattern over and 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Note :- Punned thickness of the sand will be measured for the payment and it will be paid separately.

Demolition of cement concrete in any description and any position etc removal from site up to 500 m complete all as specified and directed.

M&L for 75 mm thick PCC1:4:8 type D-2 using 40mm graded as in sub base of floor complete all as specified and directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

S & F in repair vitreous china Urinal , Half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern,flush pipe) complete all as specified and as directed.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in wall complete all as specified and directed.

S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete.

S & F( in repair) 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.

Supply & Fixing 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600mm long complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Demolition and breaking up drain pipe of dia 200/300 mm (internal dia) (salt glazed stoneware, AC or reinforced conrete) set in cement mortar Including excavation complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP3 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 200 /300mm internal dia of pipe complete all as specified and directed

Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 200/300 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement kmortar 1:1 complete all as specified and directed.

Returning, filling in Soft/Loose soil including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete.

M & L Cutting up bushes, grass, eliphant gross,small branches of tree or any other type of obstacles to create workable space along the boundary wall and up to one meter wide from the wall to fixing of CGI sheet, barbed wire and concertina coil etc., complete all as specified and directed.

Felling of tree exc. 30 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 m and clearing site

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform and like, over & including 15mm thick screed bed or bedding layer in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour as per direction of GE, including demolition of stone slabs and tiles of any description or thickness etc. complete all as specified and directed

M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete.

M&L for RCC 1:1 1/2:3 Type A-1 using 20mm graded stone aggregate as in slabs supported on wall, beam and columns in floors, roof slabs and in shelves complete

Use and waste form work to soffits of suspended slabs fair finished such as roof slabs, floor slabs, Landings and similar work not exceeding 200 mm thick, fair finished surface of concrete complete.

Use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings openings in concrete wall, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horisontal or sloping and smiliar work exc 10cm but n. exc 20 cm wide, rough finished surfaces of concrete complete

S & F mild steel TMT bars 6 to 8 mm dia as in reinforcement, cut to length, benty shape required including cranking, bending, spirally for hooping for columns, hooking ends and hinding with mild stee wire (annealed) not less than 0.9 mm dia or securing with clips complete.

Material and labour for preparation of old surface of wall and applying two coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement

S&F steel window with side hung shutter incl projecting hinge, fixing lugs, steel handle and steel peg stay complete with glazing bars.

S&F steel window with side hung shutter including projecting hinge,fixing lugs,steel handle and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and as directed

S&F steel ventilator with top hung shutter with or without glazing bar, incl hinges, fixing lugs, steel peg stay, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples in repairs complete all as specified and as directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of old steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply one coat of synthetic enamel paint complete all as specified and directed.

S&F 3mm thick sheet glass,ordinary qauality and glazing with oil putty in square n exc 05 sqm in each pane

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 (for securing wire mesh etc) and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S & F Galvanised, corrugated mild steel 0.63 mm thick sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, wall clading, or as view cutter over the boundary wall, etc. including dismantling of corrugated steel sheeting, complete all as specifed and directed.

M & L for Roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc. all as specified and directed.

M & L Brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces complete.

M & L Cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement in the proportion of (1:4:7) by weight mix or as per manufacturers instructions all as specified and directed complete.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M&L Water proofing treatment on "approachable / accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete. (i) cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats as per manufacturers instruction.

M & L for plain aluminium sheeting 0.56mm thick bright finished bent/cut to shape ( for covering parapet top, side of roof projection and other similar works) fixed with flat aluminium 10 x 2 mm and screw PVC raw plug @ 300 C/C distance complete all as specified and as directed by GE.

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

M&L Providing Precast jallies, 25mm thick (measured solid), type B0 1:2:4 (12.5mm graded aggregate), set in cement mortar 1:4 including all mouldings complete all as specified and directed.

PCC 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains haunching complete all as specified and as directed.

EXTRA for forming fair finished channel 45 Cm inner girth in cement concrete using extra cement, including moulds mitred stopped ends etc, complete.

S & F mild steel TMT bar 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip quality complete.

S&F PVC (SWR) pipe 50mm dia single socketed in any length provided as in weep hole in brick wall etc complete all as specified and as directed.

Add /deduct for each 25mm girth or part thereof over or under 45 cm girth complete. Note: This item is applicable for adjustment of girth of channel during execution.

M&L Re-inforced concrete pipe dia 300 mm (internal dia) Class NP-2 laid and jointed complete with collars

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

M & L 20 -25 mm thick kota stone, machin cut kota stone slab flooring over 20mm cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (mirror polished).

M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (mirror polished)over 10mm thick rendering in CM 1:4..

M&L RCC 1:2:4 type B1 ( 20mm graded stone aggragate) for slab supported on walls, beams and coloumns in floors roofs, landings, balconies, canopies,deck slab and in shelves and the like.

M&L mild steel TMT steel bars in reinforcement 5mm dia and over up to 10mm dia in stirups cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

M & L for Cement concrete foundation filling and mass concrete type D-2 1:4:8 (40mm graded Aggregate)

S & F for MS angle iron Hand rails, including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F IInd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated.

S & F Prelaminated particle board, 18/19mm thick interior grade, prelaminated one side with decorative choice lamination & oher side balancing white lamination, fixed with screws to timber frame/metal work as in cup board shutter, shelvas etc fixed in repair complete all as specified and as directed.

M & L Plain fillets square, rectangular or triangular in section, clean swan, secured with nails or brads sectional area n.exc 3 Sqcm complete all as specified and directed.

S & F IInd class hard wood plain soid, straight, chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying & fixing in the frame at site all as specification and drawing for item No 879 in SSR part II 2004

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforsed with M\S squre tube supplying and fixing in opening as per specification & drawing

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth priming coat with pink primer and applying two coat of sythentic enamel paint all specified.

M&L for cement plaster rendering 15mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth with thin layer of sagol complete all as specified and directed.

Supply only Integral waterproofing compound.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M & L Cement concrete Type C2 1:3:6 (40mm graded stone aggregate) 100mm thick

M & L Hardcore of broken stone or boulders guage exc. 63 mm but n exc. 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled / rammed to a true surface

S&F in repairs fancy type cromium plated bib tap 15mm bore cast copper alloy with crutch or butterfly handles, screwed down screwed for iron pipe or for brass ferrule and fixed all as directed by Engineer-in-Charge

S & F Tubes, 'medium grad', galvanised, with all fitting; laid in trenches 20mm bore

S & F Tubes, 'medium grad', galvanised, with all fitting; laid in trenches 15mm bore

S & F 110mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 75mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 110mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F 75mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F for PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

S & F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

S & F for PVC (SWR) branch piece, double 'Y' equal or unequal 110mm bore complete all as specified and as directed

S & F for PVC (SWR) branch piece, double 'Y' equal or unequal 75mm bore complete all as specified and as directed

S&F in repair white vitreous China Counter type wash hand basin of size 550x400mm with CI bracket and comprising of the following :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) Pillar tap cast copper alloy with capstan head chromium plated, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (c) PVC waste pipe 32mm dia 600mm long. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.

M&L brick work with fsub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 completed all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M & L Granite (of any type) tiles / slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 20mm thick in CM 1:6

M & L Granite (of any type) tiles / slab 20mm thick machine cut, in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 15mm thick in CM 1:3 complited all as specified and as directed.

Rounding to edges of stone slabs one edge / nosing such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F in repair vitreous china wash done water closet padestal pattern white with 'P' or 'S' trap including PVC white seat cover.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit FRLS of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium point wiring light, fan, sockets including all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for One light / fan /bell controlled by one, one way switch 5/6 Amps.

Description same as per Item No. 120.00 but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch.

Description same as per Item No. 120.00 but One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch.

Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit (FRLS) of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium power point wiring switches , sockets , and making good disturbed surface of walls and floors etc. complete all as specified and directed

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S/F switch modular type 16 A, 1 module complete all as specified and directed.

S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F in replacement of exhaust fan non metallic single phase 230 volt of size 250mm sweep with louver all as specified and as directed. Make : Bajaj Mode- maxima DX/ Havells, Model-Venti Air DX/ Crompton, Model-Brisk Air.

S&F surface /wall mounted LED batten (other than slim channel type) poly carbonate housing for retrofit LED tube T-8 type upto 1x22 watt, 4 feet long pre wired incl integrated electronic driver complete with all connected accessories all as specified and directed.

S&F ultra bright LED poly carbonate tube light 4 feet long 18 to 20 watts with THD less than 15% very high effficiency suited for T-8 tube light luminare with system efficiency 120 lumens per watts, fixture lumen package should be ≥ 2200 lumen. High quality polycarbonate end cap in white finish and snap fitted to the housing complete all as specified and directed.

M&L for LED Bulk head fitings of wattage 6 to 13 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S&F LED bldg security light fitting 30 watts made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-65 and IK-07 protection, THD < 10% , lumen output ≥ 110 lumen per watt complete all as specified and directed.

S&F VTPN DB, 08 way, IP-43, IK 09, double door type with metal door, suitable for fixing upto 3 pole 160 Amp MCCBs as incomer and SP/TP MCB/Isolator as outgoing, including taking down, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

S&F MCCB 3 pole 160 Amps breaking capacity 25 KA, Ics = 100% Icu including spreader link & taking down complete all as specified and directed.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed

Sub main wiring with 2 single core,6 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 6.0 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed.

Taking down existing exhaust fan/ceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and deposit to MES store yard complete all as specified and as directed

S&F in replacement of exhaust fan , steel body AC single phase 230 volt of size 300 mm mm sweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.

Supply , fixing rigid non metallic PVC conduit fixed conceiled on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed

M&L for errection of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 ( 9.0 metres long)

S & F LED security light fitting 90 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection fixed on 9 mtr pole complete with GI pipe of size 32/40 mm bend into sizes with clamps , nut, bolt and washers complete incl PVC junction box with 3 phase connector bus bar incl 1.5 sqmm PVC copper wire from junction box to fittings all as specified and directed.

Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm

Supply and laying fine sand for cable protection in layers incl punning all as specified and directed

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing incl connecting to existing LT panel board and VTPN DBs all as as directed at site.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing all as as directed at site.

Tubes, 'light grade, galvanised, with all fitting of size 40 mm ;laid in trenches for cable protection all as specified and directed.

M&L for cement concrete in foundation of poles of grade C2 1:3: 6 ( 40 mm graded aggregate)

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping of poles including necessary use and waste of formwork and finishing the surface even and smooth without using extra cement complete all as specified

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply and fixing wall mounted LED tube light fitting 10 watts comprising batten of extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED 2 feet long ,THD less than 15% complete all as specified and directed.

M&L for PVC Juction Box with MCB SP 6A including two way busbar made of Aluminium complete all as specified and directed.

S&F MCB DB SPN 4 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

S&F in replacement of exhaust fan, non metalic single phase 230 volt of size 250 mm sweep with louvers all as specified and directed.

M&L for painting of ceiling fan 1200 mm sweep complete with synthetic enamel paint by spraying , filling cavities with filler, one coat after cleaning all dust incl hanging into its original position, changing of conopies,connection wires all as directed.

S&F fan regulator stepped electronic, modular type 02 module as specifed and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core on wall/ ceiling under PCC / interlocking tiles inside GI pipe making good of surface with PCC/ cementing all as as directed at site. Note:- GI pipe shall be measured and paid separately.

M/S UnitedConstruction

sunway associates

M/S Ashish Construction