Provn of car and scooter parking shed for bldg No P-246, P-343 at Jadunath enclave, T-12, P-22 for JCOs/ORs md accn and 55x geysers for md accn P-23, P-24, P-27, T-22, P-29, T-31 and T-32 at Bana Singh enclave and MT shed for MT Veh of AAS at TMS.

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and not exc 1.5m in depth and getting out all as specified and directed.

M&L for hardcore of broken stone or boulders of guage n. exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 100mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in floor, finished even and fair complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including distance pieces, cleats etc all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for brick work with flyash old size bricks, straight or curved on plan exc. 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work and finishing surface even and fair complete all as specified and directed.

M&L for preparation of new wall surfaces and spplying two coat of white wash complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum, getting out, returing filling in and ramming earth or broken rubble mixed with earth arround in layers not exceeding 25cm all as specified and directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F for rolled mild steel Gde Fe-410-W Gde E-250 quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails and fastenings and heavy brackets framing ( beam, tee, angle, column, gusset plates, channel, hollow square/ rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc complete all as specified and directed by Engr-in-Charge.

Point wiring with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) using approved colour coding, 1100 volts grade, ISI marked, including PVC conduit heavy grade, 20 mm or higher dia. with fittings concealed in wall/ on surface for ceiling with continuous earth wire of PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) 1100 volts grade, ISI marked and connecting to the common earth dolly including provn of 3mm thick plastic laminated sheet of appropriate size and sunken CI/pressed steel terminal boxes for mounting switches, sockets etc. including cutting chases and making good to the disturbed surfaces as per existing for one 15/16 Amps 3 pin socket outlet point controlled by one, one way switch complete all as specified and directed.

S&F switch piano flush type single pole 1 way 15/16 Amp complete all as specified and directed.

S&F socket outlet 2-in-3 pin 15/16 amps flush type complete all as specified and directed.

Supply and fixing GI pipe 15mm dia medium grade with all fittings and fixed complete to wall and ceiling including drilling hole on wall for incoming and outgoing pipe complete all as specified and directed.

Supply and fixing GI pipe 20mm dia medium grade with all fittings and fixed complete to wall and ceiling including drilling hole on wall for incoming and outgoing pipe complete all as specified and directed.

Supply and fixing gun-metal, globe or gate valves with iron wheel head, screwed both ends ISI marked suitable for 20mm dia iron pipe complete all as specified and directed.

S&F bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down, screwed for iron pipe 15mm bore complete all as specified and directed.

Supply & fixing for storage water heater (Geyser) of 25 ltr capaicty 230V AC, 50 Hz having element of 2 KW of copper/ Incoloy alloy, rust proof outer body, high density PUF insulation, BEE 5 star rated, inner tank of stainless steel 304 grade which can sustain pressure of minimum 8 Bar working pressure and having multifunction safety valve making electric and water connection complete all as specified and directed.

S&F and grouting 4 Nos nut & bolts 200mm long 12mm dia in wall for fixing one geyser and fixing by clamp complete all as specified and directed.

Supply and fixing PVC connection 15mm dia PTMT nut of length 450mm complete all as specified and directed.

Supply and fixing stop valve cast copper alloy 15mm dia screwed down high pressure with crutch or butter fly handle screwed both end for iron pipe complete all as specified and directed.

Supply and fixing stop valve cast copper alloy 20mm dia screwed down high pressure with crutch or butter fly handle screwed both end for iron pipe complete all as specified and directed.

A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

J S MAAN ENTERPRISES

M/S DARSHAN & CO

buta singh and sons

M/S Harjinder Singh Contractor

M/S D Raj And Co