Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹43.4 L+₹3.9 L (9.84%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹44.3 L+₹4.7 L (12.0%)Rejected-Finance 1ST FLOOR H NO 165 GALI NO 16 S B S COLONY KARAWAL NAGAR DELHI EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹44.7 L+₹5.1 L (13.0%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹49.1 L+₹9.6 L (24.2%)Rejected-Finance 1 206 SHOP NO 71 MANDIR MARKET SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹48.9 L
EMD Value
₹97,880
Closing Date
21 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
WELCOME MAINT TO CERTAIN BLDG AT ZONE-I IN THE AOR OF AGE B/R-I UNDER AGE B/R-I GE (EAST) DELHI CANTT-10
2022_MES_554105_1
GE/DE-56/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹97,880
Yes
26 Dec 2022
24 Sept 2022
24 Oct 2022
24 Sept 2022
21 Oct 2022
8 Oct 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.
Taking down shutters of any description exc 1 sqm n .exc 2 Sqm each complete.
Taking up or down steel tubing and connections 15mm bore complete.
Taking up or down steel tubing and connections 20mm bore complete.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.
Taking down shutter and refixing in same opening exc1 sqm n exc 2 sqm
All same as per srl Item No 07 here-in-before but exc 2 sqm each
M&L Forming jambs, etc. to openings (to foregoing item),CM 1:6 including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete
M&L Making good under cills or over arches, lintels and bres summers in cement mortar 1:6 including all pinning when necessary
M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair without using extra cement, all as specified .
M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair without using extra cement, all as specified .
M&L for Non-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar 1:6 including dismantling of old tiles removing rubbish off the premises complete all as specified and as directed
M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size exceeding 0.14 sqm and size n exc 0.18 mmthick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed.
M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed.
M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each as in vertical surfaces of dados/skirtings/sides of pillars etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing layer in cement mortar 1:4 including dismantling of old tiles with backing, and removing rubbish off the premises complete all as specified and as directed.
S&F in repair fancy type Curtain rods decorative type stainless steel 25mm nominal dia of approved quality(Make VISTA) (1mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 1.80m long) complete all as directed and specified.
S&F 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms,dado/wall and like in over and including 15mm thick rendering/screed bed in cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of rendering/bed pigment to match with shade of granite, including moulding of edges.including dismantlimg complete all as specified and as directed
Removing existing paint by scrapping with TruCare Wall Sander: L-01/H-01(having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified and directed
M&L waterproof cement based wall care putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, of Asian paints or its equivalent over the new plastered/old painted wall after scrapping to prepare the surface even and smooth on wall/ceiling surface complete all as specified and directed. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints or equivalent as per list of makes Trucare Putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5kg putty per minute).. Step 2 : Allow 6-8 hrs time to dry the putty surface.
Sanding of the putty surface with Asian Paints or equivalent as per list of makes Tru Care Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified.
M&L one coat of acrylic waterbased interior grade primer @ 0.8ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on wall/ceiling surface complete all as specified
M&L two coats of smooth acrylic emulsion paint with rich matt finish(interior grade) having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on wall surface complete all as specified..
M&L two coats of smooth acrylic emulsion paint with rich matt finish(interior grade) having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on ceiling surface and applying a layer of 1mm thick wall care putty again sand papering thus making surface smooth and applying one coat of primer complete all as specified.
M&L Preparation external wall and ceiling surface by complete removal of existing treatment of walls for upto 4 storey buildings by mechanised sander of Asian Paints or equivalent as per list of makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying two coats of weather proofing exterior acrylic emulsion paint premium quality over one coat of exterior primer complete all as specified and directed by Engr-in-charge.
M&L Preparation of old decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed.
M&L Applying two coats of oil bound distemper on wall surfaces complete all as specified and directed. (Note : Finishing coat to applied with roller).
M&L Applying one coats of Oil Bound distemper on ceiling surface complete all as specified and directed. (Note : Finishing coat to applied with roller).
M&L Applying one coats of Smooth Acrylic emulsiom on ceiling surface complete all as specified and directed. (Note : Finishing coat to applied with roller).
M&L Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, over a coat of primer complete all as specified and as directed.
M&L Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L for preparation old decorated external wall surface by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and repair to potholes by putty and making surface even and smooth and applying two coats of Cement base paint complete all as specified and directed by Engr-in-charge. Note : 1. The work will be also executed upto four storied bldgs and necessary T&P, scaffoling is included in Quoted rates. 2. Cleaning/washing and dusting of floor/wall/door/window/fittings and fixture to be carried out by contractor before handover the site
Cleaning existing Chromium plated bath fittings and vitreous china sanitary ware using suitable chemical or solvent as per manufacturer's instruction duly taking care not to damage the polish/enamel on fittings, complete all as specified and as directed by Engr-in-Charge.
S&F in repair 15mm bore Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg ,CP flange etc complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S&F in repair Sink mixer with regular swinging spout (wall mounted model ) with connecting legs & wall flanges) for 15 mm bore, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S&F in repair fancy type angle Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete. (Make: Jaquar/Marc/Kohler)
Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete.
M&L Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete.
All same as per srl item No 39 here-in-before but 20mm bore complete.
S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete
S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specifed and directed.
S&F in repair Plastic water closet seat cover White closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete.
S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete (Make: Jaquar/Marc/Kohler)
S&F in repair fancy type Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete. (Make: Jaquar/Marc/Kohler)
S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls,complete. (Make: Jaquar/Marc/Kohler)
S&F in repair SS Toilet roll holder with flange fixed in position complete all as specified . (Make: Jaquar/Marc/Kohler)
S&F in repair SS Soap Dish with flange fixed in position complete all as specified . (Make: Jaquar/Marc/Kohler)
S&F in repair SS Towel Ring with flange fixed in position complete all as specified . (Make: Jaquar/Marc/Kohler)
S&F PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete.
S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100mm diameter of outlet, all as specified.
M&L in repair Chromium plated brass Health faucet with one metre long flexible tube in chrome finish fixed in position with brass chromium plated nuts for 15mm bore tubing, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 but n.exc 1000 ltrs and from mouth of circulating pipes with suitable chemical or solvent as per manufacturer's instruction duly taking care not to damage etc including disconnecting, reconnecting & refixing water tanks in position complete.
S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.
S&F in repair Corner Glass Shelf of size 225mm x 225mm including screws and bracket fixed in position complete all as specified and as directed
S&F stainless steel peg set (set of 06 hook) fixed with screw and PVC gutty on wall in position as per sample kept in GE office complete all as specified .
Dismantling water tanks exc 500 but n exc 1000 Ltrs capacity and removing to store.
S&F tripple layer Rotational moulded HDPE Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted including threaded type lid and fixed in position complete all as specified in SSR Part I etc complete.
All same as per srl item No 59 here-in-before but 1000 ltr capacity complete all as specified and directed
S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete.
S&F in repair Gun metal gate valve with iron wheel head screed both ends for iron pipe and fixed 20mmm bore complete
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004.
S&F Factory made Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
S&F Factory made, Plain framed panelled shutters of 2nd class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed.
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 Gde E-165 complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020).
S&F Aluminium alloy powder coated (50micron) anodised auminium door frame section 100xmm x 44mmx2mm thickness ,shutters of aluminium section ofsize 85mm x44mm x2mm thick Top rail and both styled of size 100 mmx44mmx2mm thick lock rail and bottom rail of xize 115mm x 44mm x2mm thick incl aluminium anodised snap beading and rubber packing & 5.50 mm thick froasted designer glass(ass approved by GE) incl 100 mm long alm butt hinges 04 Nos each leaf 200mm long tower bolt ,.200 mm long fancy ryper alm handle -02 Nos on each leaf ,4 leaver brass 100mm long mortick lock & doubble action floor door spring heavy duty suitable to 1M wide shutter for each leaf, complete all as specified and as directed.
S&F aluminum anodised powder coated grill section 5 to 6 mm of square/dimond shape having picth size of mesh 75x100 mm etc complete all as directed.
S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc
S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .
Extruded aluminum alloy handle, fabricated type, anodized 125mm size, fixed in repairs complete.
S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.
S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete.
S7F in repair Door closer hydraulically regulated, aluminium body, designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, fixed in repairs complete.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete.
S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3.50mm thick all as specified
Dismantling boarding, any description, fixed in any position with screw complete
M&L for prelaminated particle board ,interior grade prelaminated one side with decorated choice lamination and other side balancing white lamination fixed with screws to timber frame work 18/19mm thick
S&F, Ist class hard wood external teak wood leaping, 6mm thick and 18-19mm width block board or veneered particle board, fixed with nails complete.
Supply and fix continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm.
S&F magnetic catches with steel body ‘H’ type, fixed to kitchen/cupboard shutter complete.
S&F, 75mm Long polished SS Handle fixed with screw.
S&F Machine pressed kitchen cupboards, cabinets, drawers, shelf, shutter etc made of 18mm thick BSB HDHMR board of front faces glossy finish other action tesa or equivalent with nails and adhesive including Auto/soft closing hinges (E/Bihari hinges) complete all as specified and as directed by Engr-in-Charge.
Supply and fix projecting type (Q crank) self closing hinges complete all as specified and as directed by Engr-in-Charge.
S&F Hasp and staple 125mm size, safety type, aluminum anodised including bolt to hinge plate, fixed in repairs with screws complete.
Taking down existing ceiling of any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE
M&L for Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting and dismantling of existing steel work etc complete all as specified.
S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws incl taking down existing CGI sheet complete all as specified.
M& L for grinding and polishing existing kotastone/marble/terrazo flooring complete all as specified and directed by Engr-in- charge. Note:- Making good of broken/ damaged flooring will be included in quoted rates.
M&L Vitreous china wall mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Solo Series Cat Part No - SLS/WHT/6851PL80PP)/ equivalent in Marc/Kohler.
M&L Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. (Make : Hindware Cat Part No - 192055/ equivalent in Jaquar/Cera.
M&L in repair vitreous china wash basin, white, flat back including full pedestal, size 560x415x200mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. (Make : Jaquar continental series - Cat Part No- CNS-WHT-801 or equivalent in Cera/ Parryware)
S&F in repair vitreous china one piece counter top wash basin, white , of size 410 x 410x160 mm including coupling, bottle trap/waste pipe complete all as specified and directed. Make : Jaquar continental series - Cat Part No- CNS-WHT-85153005PP or equivalent in Cera/Parryware
S&F in repair Brass CP basin mixer single lever without popup waste with 450mm long braided hoses for mixing hot and cold water fixed as per manufacture's manual, suitable for 15mm bore GI pipe joints to GI pipes or unions complete all as specified and directed. (Make : Cera Cat Part No F1005451/ Hindware Cat Part No F-360011/ Jaquar Cat Part No ARI CHR 39001B or as approved by GE.)
S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed.
S&F in repair 15mm bore fancy type chromium plate 2 way bib cast copper alloy with cruth or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore including CP wall flange all as specified and directed
S&F in repairs CP Health faucet including flexible pipe of 1 m length fixing to 15m dia pipe with brass check nut complete all as specifed and directed. Make- Hindware/Marc/Cera/Jaquar
Taking out existing old water proofing treatment with APP membrane, wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out grass roots/vegetation etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped and drying the cleaned surface for further treatment, complete all as specified and as directed.
M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (Note: WPC shall be measured and paid separately)
Supply only liquid water proofing compound and mixed as per manufacturer's instructions, complete all as specified and as directed.
Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.30Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric membrane minimum weight 3.50kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (Note : (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authorised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Ten years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
M&L Bitumastic gola, with 80/25 bitumen and coarse sand mixture 1;3 by weight, 8cm x 8 cm at the junction of roofing to wertical surface.
Dimantling of soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings
S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls
S&F PVC (SWR) bends any radius 110 mm bore
S&F PVC (SWR) Tee any radius 110 mm bore
S&F in repair for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipecomplete all as specified and directed.
S & F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc.including dismantling of old sheet complete all as specified.
S&F Rubber door seal 32mm wide with aluminium strip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed.
Dismantling of RCC Jalli of any description and in position and unserviceable Jalli removed from site and serviceable RCC Jalli stactaking at site after cleaning/dusting for fixing the same as directed by Engineer in Charge.
S&F Precast RCC coping /post of size 600x100x50mm suitable for fixing of RCC jalli in vertically and horizontally incl necessary moulds and grooves as reqd shape and size complete all as specified and directed.
M & L for providing precast cement concrete 1:2:4 type B1 using 20mm graded aggregate louvres and jallies, 50mm thick (measured solid), including all mouldings set in CM 1:4 complete all as specified
Demolition of cement concrete in ground floors of any description and in any position not otherwise specifically provided (un reinforced) complete all as specified.
M&L 75mm thick cement concrete 1:3:6 type B2 using 40mm graded stone aggregate as in plinth/sub base. Complete all as specified.
M & L for OUT DOOR coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified MAKE-ENDURA BY NITCO OR EQUIVALENT
Akhil Enterprises
R. S. Associates
M/s Shubh Enterprises
A R construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .