S/R to E.I in the Prisoner Wards, Replacement and installation of Cubical panel and Additional security light with cable in the campus of Divisional Jail, Gumla.

Wiring for light point/fan point/exhaust fan point/call bell point, with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, piano type switch,phenolic laminated sheet with suitable size PVC/MS box etc as required

Group A

Wiring for circuit/ submain wiring along with earh wire with the following sizes of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit as required

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire(for light circuit )

2 x 4.0 sq.mm + 1 x 4.0 sq.mm earth wire (for light submain )

2 x 6.0 sq.mm + 1 x 6.0 sq.mm earth wire (For Power Submain)

Supplying and fixing suitable size GI/PVC box of 75 mm x 75 mm x 50 mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch. connection, painting etc. as required (For light plugs to be used in non residential buildings )

Supplying and fixing suitable size GI/PVC box of 121 mm x 173mm x 48mm/(6" x 8") (nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 15/16 & 15/16 amps socket outlet and 15/16 amps piano type switch. connection, painting etc. as required

Wiring for light/power plug with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 1 No 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.

1200mm (48") Ceiling Fan

16" (400mm) Wall mounted fan"

15'' (380mm) metal exaust fan .

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc. as required.

Electronic step fan regulator, Delux

Supplying and fixing 2 pin 5 amp. Ceiling rose on the existing junction box/ wooen block including connection etc. as required .

15/16Watt LED Bulb

Supplying and fixing Batten / Angle holder including connection etc as required .

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required.

20/22W LED Tube light

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2 way, Single door

4 way, Single door

6 way, Double door

8 way, Double door

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.

6/32 amps, single Pole, "B" series

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.

40 amps MCB DP

63 amps MCB DP

Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses, including drilling holes in metal board . making connections. etc. as required.

63 amps, TP&N

63 amps, double pole

32 amps, double pole

Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections, earthing the body etc. as required.

63 amp, 415V, Heavy duty three phase with neutral Busbar Chamber

S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-5 and shall be complete with all neccssary accessories as required

90/100W LED Flood light

200W LED Flood light

240W LED Flood light

Supplying and fixing Cable junction Box with MCB (Make-Sintex/Hensel or equivalent )

Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in existing surface / recessed steel / PVC conduit including dismantling as required

3 x 1.5 sq.mm (for Led Flood light connection)

Supplying and laying of XLPE insulated PVC sheathed aluminium armoured cable working voltage upto 1100 volts as per IS: 7098 (Part I) of following sizes.

3.5 core, 300 sq. mm (Main Service Cable for Main Panel)

3.5 core, 95 sq. mm (From Main Panel to Sub Panel 1)

3.5 core, 50 sq. mm (From Main Panel to Sub Panel 2)

4 core, 16 sq. mm ( Power Supply)

2 core, 16 sq. mm ( Power Supply)

4 core, 10 sq. mm (for watch tower )

2 core ,10 sq. mm (for Flood light )

2 core, 6 sq. mm (for Flood light)

65mm dia, medium class GI pipes ( For road crossing of Cables)

300sq.mm. aluminium lugs

150sq.mm. aluminium lugs

95sq.mm. aluminium lugs

50sq.mm. aluminium lugs

10sq.mm. aluminium lugs

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 185 sq mm but not exceeding 400 sq mm direct in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sq mm direct in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

80mm dia Earthing Electrode 2mtr. Length / 80mm dia Earthing Electrode 3mtr. Length / 50mm dia Earthing Electrode 2mtr. Length/50mm dia Earthing Electrode 3mtr. Length & Backfill Compound chemical 4 Bag(per bag 25 KG)

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

Fabrication and installation of cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade making PCC plinth and foundation including fitting / fixing / connection & transportation up to work site , labour charge etc all complete.

400 amps, MCCB 35 KA, Adjustable thermal setting (Incomer)- 1 Each

250 amps, 35 KA, Adjustable thermal setting (DG Incomer)- 1 Each

400 amps, 4 pole changeover switches- 1 Nos

250 amps, MCCB 35 KA, fixed thermal setting- 1 Nos

100 amps, MCCB 16 KA fixed thermal setting- 6 Nos

50/63 Amp TPN C series MCB- 2 Nos

Digital Volt Mtr. (0-500Volt)- 3 phase class 0.5- 1 Nos

Digital AMP Mtr. (0-500AMP)- 3 phase class 0.5- 1 Nos

C.T. Coil of C.T. Ratio 300/5- 3 Nos

LED Indecator lam R/Y/B/G- 6 Nos

25mm x 5mm copper strips (1.15 kg/mtr)- 40 Kg

50mm x 5mm copper strips (2.30 kg/mtr)- 25 Kg

50/63 amps, DP mcb- 5 Nos

Fabrication and installation of cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade making PCC plinth and foundation including fitting / fixing / connection & transportation up to work site , labour charge etc all complete.

200 amps,MCCB 35 KA, fixed thermal setting (Incomer)-1 Each

200 amps,MCCB 35 KA, fixed thermal setting (DG Incomer)+ 1 Each

200 amps, 4 pole changeover switches- 1 Each

50/63 Amp TPN C series MCB- 3 Nos

50/63 Amps DP MCB- 7 Nos

32 amps, TPN ( For 2nos High Mast)- 2 Nos

LED Indecator lam R/Y/B/G- 6 Nos

Digital Volt Mtr. (0-500Volt)- 3 phase class 0.5- 1 Nos

Digital AMP Mtr. (0-500AMP)- 3 phase class 0.5- 1 Nos

C.T. Coil of C.T. Ratio 300/5- 3 Nos

25mm x 5mm copper strips (1.15 kg/mtr)- 30 Kg

Fabrication and installation of cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade making PCC plinth and foundation including fitting / fixing / connection & transportation up to work site , labour charge etc all complete.

125 amps, MCCB 16 KA fixed thermal setting (Incomer) - Nos

125 amps, MCCB 16 KA fixed thermal setting (DG Incomer)- 1 Nos

125 amps, 4 pole changeover switches- 1 Nos

50/63 Amps DP MCB-8 Nos

50/63 Amp TPN C series MCB-2 Nos

LED Indecator lam R/Y/B/G- 6 Nos

Digital Volt Mtr. (0-500Volt)- 3 phase class 0.5-1 Nos

Digital AMP Mtr. (0-500AMP)- 3 phase class 0.5- 1 Nos

C.T. Coil of C.T. Ratio 300/5-3 Nos

25mm x 5mm copper strips (1.15 kg/mtr)-30 Kg

Labour Cess @ 1%