Supply, Installation, testing, commissioning and replacement of existing AHUs, piping, valves, insulation, at Central Complex, BARC, Trombay, Mumbai 400085

Amount

Air handling Units: Supply, Installation, testing, commissioning and replacement of complete set of Air Handling Units including, rubber /spring isolators, flexible connection, damper, thermometers, pressure-gauges with syphons & cock (in SS Construction), air release valves, UV lamps cabling/wiring, termination into electrical panel as per technical specifications.

Supply of same, additional 1 no. Motor for 40 TR AHU, one set of motor bearings, one set of AHU bearings, one set of V-belts and one set of washable air filters.

Supply of same, additional 1 no. Motor for 30 TR AHU, one set of motor bearings, one set of AHU bearings, one set of V-belts and one set of washable air filters.

Supply of same, additional 1 no. Motor for 20 TR AHU, one set of motor bearings, one set of AHU bearings, one set of V-belts and one set of washable air filters.

GI Piping: Supply, Installation, testing, commissioning and replacement of existing heavy class chilled water GI pipe line alongwith flanges, bends, reducers, expanders, unions, nipples, u-traps, 19 mm thick closed cell nitrile rubber thermal insualtion with monsoon tape, necessary MS supports, nut bolt washer, gasket,wooden gatti with clamp and 26 G aluminium cladding of following sizes as per technical specifications.

80 mm dia.

50 mm dia.

40 mm dia. (with 12 mm thick insulation)

CI Valves: Supply, Installation, testing, commissioning and replacement of existing CI flanged end Gate/Globe Valves, 'y' strainers, NRVs along with counter flanges, GI nut-bolts-washer, gasket and 19 mm thick closed cell nitrile rubber thermal insualtion with monsoon tape, and 26 G aluminium cladding.

80 mm dia. Gate valves

only supply of 80 mm dia. Gate Valve

50 mm dia. Gate valves

Only supply of 50 mm dia. Gate valves

80 mm dia. 'Y stariner

50 mm dia. 'Y' stainer

NRV 80mm

NRV 50mm

GI Ducting: Supply and installation of GI ducting along with necessary supports and 19 mm thick closed cell nitrile rubber thermal insulation of following sizes as per technical specification.

22 gauge G.I. sheet (0.8 mm) ducting

2 way Pressure Independant Balancing & Control Valve: S.I.T.C of following flanged end PIBCV with Actuator and Temperature controllers complete with, control and power cabling/wiring to regulate the valve as per preset temperature in the room/equipment, with valve insulation of following sizes and flow as per specifications.

PIBCV of size 80 NB with Actuator and Temperature controller 340-350 LPM for 30 TR AHU & 450-460 LPM for 40 TR AHU

Only supply of PIBCV of size 80 NB with Actuator and Temperature controller 340-350 LPM for 30 TR AHU with counter flanges Nut Bolts, Washers & Gaskets.

PIBCV of size 50 NB with Actuator and Temperature controller 220-230 LPM for 20 TR AHU

Only supply of PIBCV of size 50 NB with Actuator and Temperature controller 220-230 LPM for 20 TR AHUwith counter flanges Nut Bolts, Washers & Gaskets.

Shifting of old scrap: Dismantling, shfting of waste material from diffrent floors of CC Complex of all old AHU's, piping, ducting, cooling coils, valves, foundations etc., cleaning of entire surfaces of removed scrap and any other material, removing old insualtion from outer metal surfaces, bringing all scrap to ground floor in open yard and shifting entire scrap with in BARC/TVS store into a truck with sufficient labourers.

Dismantled items of each AHU, piping, valves, insulation etc.

BRITE INDUSTRIES

M/s Associated Engineers

AIRTEK HVAC LLP

ENGINEERING CONSOLIDATED