Construction of 10000 Lit OHT 7.5m Stage with Motor room and Pipe line arrangements at Kottai Perumal kovil street ward no 8 in Attur Municipality at Alexchander street in Attur municipality

Amount

Earth work excavation & depositing on bank with an initial lead of 10 metre & initial lift of 2 metre in Hard shift clay, stiff block cotton, hard red earth shales, murrum, gravel, stoney earth, and earth mixed with small size boulders and hard gravelly soil (SS 20B) for foundation including shoring, strutting, baling out water providing danger light wherever necessary depositing the surplus earth on bank and other incedential charges etc., complete and as directed by TWAD board Officers

Sand filling for foundation with clear M. sand including cost of sand ,watering, ramming and consolidation etc complete as directed by TWAD Bord officers

Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers.

Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed) excluding the cost of RTS rods for reinforcement and centering, strutting, shuttering but including cost of all materials mixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating, finishing and curing etc., Complete and as directed by the TWAD Board Officers.Below 1.5m from GL Column footing

0m to 1.50m below GL Column

0m to 4.50m above GL Column

4.50 m to 7.32 m above GL Column ,For grid beam,For Floor Slab

7.32 m to 10.98 m above GL For haunches,For Side Wall 7.35m to 10.25m ,For Roof slab,Deduction for manhole cover,for ventilater

Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers. plane surface/below GL

plane surface/ gl-3.30m ht

plane surface/ 3.30- 4.30m above GL Column

plane surface/ 6.30- 7.30m above GL Column

squre column below GL AND 3.30M Aabove GL

squre column3.31M -4.30M HT

squre column4.31M -5.30M HT

squre column5.31M -6.30M HT

squre column6.31M -7.30M HT

Curved surface upto 3.30 HT

Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecification and supplied with test certificate Fe. 415 grade as per IS specification No.1786/1985 and as amended from time to time) delivery at site of work including loading, freight, unloading, stacking, transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers.

Painting two coats with approved Exterior Emulsion paint over one priming coat of white cement over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using Emulsion paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers.

Supply and Delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for sides and steps in 16 mm MS plain rods fixed at 30cm C/C welded jointed etc ., providing with suitable side supports, clamps and locking arrangements provided with two coats of approved enamel paint over one coat of redoxide paint , for providing access to roof top of 20000 litres OHT of suitable inclined length , including bottom anchorage and transportation and as directed by TWAD Board officers. The rate includes concrete bed block in CC 1:2:4 using 20mm HBGS at top and bottom of suitable size with necessry anchor bolts.

Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers.

Providing 110mm PVC vent cowl arrangements mosquito proof nylon net and as directed by TWAD Board officers

Supply and fixing of cut stone of size 0.30m x 0.30m x 0.15m in CM 1;3(one cement and three sand) below inlet pipe for Service Reservoir as directed by TWAD Board Officers.

Supplying and fixing of water tight Manhole frame and cover ofMedium type) of size 0.60 x 0.60m in RCC 1 : 11/2:3 with suitable reinforcement and 50 x 50 x 6mm MS angle fixed along edges and as directed by the TWAD Board Officers.

Pipe connection arrangements for inlet,outlet,scour and overflow etc. including cost of pipes,specials,valve,labour charges for lifting, aligning, cutting, threading ,fixing and painting of GI pipes with two coats of approved quality enamal paint etc. complete as detailed below.50mm GI pipes for scour pipe

50mm GI coupler

50mm GI Elbow

50mm GI Flange set

50mm GM gate valve

Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers

Fly ash in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using fly ash bricks of size 230 x 110 x 70mm including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and delivery of following GI Pipes (Medium) B Class with Specials with ISI mark including cost and conveyance of all materials etc., complete complying with standard specification.40mm GI Pipe

40mm GI Coupling

40mm GI Elbow

40mm GI H Nipple

40mm GI Tee

40mm GI Union

40mm GM Gatevalve

Towards the labour charges for Cutting and Threading for GI Pipes etc., Completed Cutting 40mm dia GI Pipe

Threading40mm dia GI Pipe

Laying and Jointing the GI Pipes and Specials including all Labour Charges etc completed

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.Fully panelled Single leaf - Door ( 1.00 m x 2.00 m)

Fully panelled Double leaf - Window ( 1.20 m x 0.90 m )

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpaintingofsuitablecolourfor open PVC light point / fan point (for electronic regulator) ( SD-18 )

Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswith150mmx100mmx113mmTWswitchboxinflushwithwallwith3mmthickhylemsheetcoverfor5A3pinnoninterlockingwallsocketwith5Aflushtypeswitchwithpaintingofsuitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point ( SD-37)

Supplying and fixing of 1200mm ( 48'' ) sweep AC ceiling fan complete with regulator with 1M down rod including S & F of fan clamp with side plates and cross arm etc, complete as per standard specifications (SD 107)

Supply and fixing of 20W 4 Feet LED Fitting including all labour charges and etc completed

Supplying and fixing of Public fountion in GI Pipe and specials , cutting and Threding etc., complete complying with standard specifications.

A R S TRADERS (BID ID -1395665)