Furniture works at Multi storey super speciality Hospital building at Sir JJ hospital campus, Byculla, Mumbai.

Low Height Storage TYPE-1 Providing and fixing 60cm Deep Low Height storage cabinet at required location made by using 19 mm thick marine Ply including shelf of 40 cm to 45cm centre to centre of requisite manufacture viz Anchor/century/kenwood or equivalent generally confirming to IS 710-1980 BW-P 710 for frame, internal verticals, horizontal divisions & openable shutters. 12 mm thick BWP-710 grade ply for drawers at top (as shown in drawing) with back and drawer base covered with 6mm thick BW P- 710 grade ply. The total shall be finished with 1 mm thick white laminate for internal finish and 1.25 mm thick laminate for external finish with necessary fixtures and fastenings viz., Hinges, handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts)

Low Height Storage TYPE-2 Providing and fixing 60cm Deep Low Height storage cabinet at required location made by using 19 mm thick marine Ply including shelf of 40 cm to 45cm centre to centre of requisite manufacture viz Anchor/century/kenwood or equivalent generally confirming to IS 710-1980 BW-P 710 for frame, internal verticals, horizontal divisions & openable shutters. 12 mm thick BWP-710 grade ply for drawers of 12.5 cm depth fitted at top (as shown in drawing) with back and drawer base covered with 6mm thick BW P grade ply. The total shall be finished with 1 mm thick white laminate for internal finish and 1.25 mm thick laminate for external finish, necessary fixtures and fastenings viz., Hinges, handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts)

Low Height Storage TYPE-3 Providing and fixing 60cm Deep Low Height storage cabinet at required location with combination of shelf at 40 cm to 45cm c/c with 1 drawers at top, 8 drawers at other end with provision of openable solid/ louvered shutters as shown in drawing with 19 mm thick ply of viz Anchor/century/kenwood or equivalent generally confirming to IS 710-1980 BW-P 710 for frame, internal verticals, horizontal divisions & for openable shutters of size 40 cm to 45cm centre to centre. 12 mm thick BWP-710 grade ply for drawers. 6mm thick BW-P ply for cabinet back and drawer base. The total shall be finished with 1 mm thick white laminate for internal finish and 1.25 mm thick laminate for external finish, necessary fixtures and fastenings viz., Hinges, handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts).

Overhead Storage Cabinet Providing and fixing 45cm Deep overhead storage cabinet at required location made by using 19 mm thick 710 BW-P grade ply of requisite manufacture viz Anchor/century/kenwood or eqivalent generally confirming to IS 710-1980 for frame, internal verticals,horizontal divisions, openable shutters with shelves provided at 40cm to 45cm centre to centre.Back covered with 6mm 710 BW-P grade ply.The total shall be finished with 1 mm thick white laminate for inernal finish and 1.25 mm thick laminate for external finish and necessary fixtures and fastenings viz., handles, locks, etc as per detailed design and drawing and instructions of Enginner in charge etc. complete (Including all leads and lifts)

Executive Tables Providing and fixing in position Different size Executive tables (As shown in drawing) made out of 19mm thick 710 BW-P grade plywood of the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top , vertical and other sides and 12mm thick 710 BW-P grade plywood for key board tray along with electronic storage and wire manager (as shown in drawing).The total shall be finished with 1 mm thick white laminate for internal finish and 1.25 mm thick laminate for external finish with necessary fixtures and fastenings etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts).

Executive Tables (With side Runner) Providing and fixing in position Different size Executive tables with runner (As shown in drawing) made out of 19mm thick 710 BW-P grade plywood of the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top , vertical and other sides and 12mm thick 710 BW-P grade plywood for key board tray along with electronic storage and wire manager (as shown in drawing).The External shall be finished with 3.5mm to 4mm thk veneer sheets including melamine polish and internal shall be finished with 1mm thk white laminate with necessary fixtures and fastenings etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete (Including all leads and lifts).

Reception Table Providing and fixing in position Reception Table of different size made out of 25mm thick 710 BW-P plywood of the requisite manufacture i.e. Anchor/ Century/Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for table top &vertical side , 19mm thick 710 BW-P ply for standing desk , 12 mm710 BW-P plywood for keyboard sides , for vertical file storage & keyboard base .Total is finished with 2mm thick acrylic sheet for table top & inverted desk and with 1 mm thick white laminate for inernal finish and 1.25 mm thick laminate for external finish with all necessary hardware viz., drawer channels, handles, locks,cable manager etc as per drwaing,specifications and instructions of Engineer In- Charge etc. complete. (Including all leads and lifts)

Nurse Station/Workstation Providing and fixing in position Nurse station/Workstation Table of different size made out of 25mm thick 710 BW-P grade plywood of the requisite manufacture i.e. Anchor/ Century/Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for table top &vertical side , 19mm thick 710 BW-P grade plywood for standing desk , 12 mm marine plywood for keyboard sides , 6 mm marine plywood for vertical file storage & keyboard base.Total is finished with 1 mm thick white laminate for internal finish and 1.25mm laminate sheet for all external sides .necessary hardware viz., drawer channels, handles, locks,wire manager etc as per drwaing, specifications and instructions of Engineer In- Charge etc. complete. (Including all leads and lifts)

Pin Up board - Providing and fixing of pin -up board having Good Quality Fabric with lamination of 3mm Foam, core matrial of Good Quality Soft Board 12mm thick, Framing: Anodized extruded aluminum in round shape with plastic ABS corner.(Including all leads and lifts)

Mobile Trolley Providing and fixing in position mobile trolley 50 mm deep made out of 19mm thick 710 BWP Plywood of the requisite manufacture i.e. Anchor/ Century/ Kenwood/ Greenply or equivalent generally confirmimng to I.S. 710 -1980 for top , front, back & vertical sides ,12 mm thick 710 BWP plywood for drawer sides and 6mm thick 710 BWP plywood for drawer base along with four table caster wheels at bottom.All sides shall be finished with 1 mm white laminate internally and 1.25 mm thick laminate for external finish necessary fixtures and fastenings viz., handles, locks, magnets etc. as per detailed design, drawing and instructions of Engineer in charge etc. complete. (Including all leads and lifts)