PROVN OF COMMUNITY HALL NEAR MES MANDIR AND CERTAIN OTHER SANCTIONED WORKS UNDER GE SUKNA IN SUKNA MIL STATION

Amount

BOQ Part-I (B/R Work)

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.

M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited / M/s IWL Limited

M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in chajja complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Sl item No. 1.19 above but 6 to 8 mm dia.

All as per Sl item No. 1.19 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.

M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces of concrete, flat / curved complete all as specified and directed.

M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.

M&L 100 mm thick, PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) as in floors, paths, sub base, plinth protection, pavings / hardstanding etc. finished even and fair complete all as specified and directed.

M&L 75 mm thick, PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) as in floors, paths, sub base, plinth protection, pavings / hardstanding etc. finished even and fair complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in walls or retaining walls, any thickness; size or shape and including pilasters, buttresses & columns including necessary formwork complete all as specified and directed.

M&L cement concrete 1:3:6 type C1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) laid above PCC sub floor / correction layer complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed.

M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire complete all as specified and directed.

S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but not exc. 10 cm long complete all as specified and directed.

S&F concertina coil razor blade type, fixed with galvanissed 'J' clips, of following specification :- (a) Dia of coil spiral / loop - 600 mm (b) No of spirals / loops per bundle of coil- 50 (c) Weight of each bundle of coil - 8 Kg (minimum) (d) Coverage of wall / fence per bundle of coil - 6 m (e) Central core wire made from high tensile spring steel wire (conforming to IS:4454) of dia 2.50 mm, UTS 1600 N/Sqmm (minimum), duly hot dipped galvanised (conforming to IS-2629) zinc coating 230gm /sqm (minimum) (f) Razorblade : Electro galvanized steel razorblades of length 11.50 mm, width 19 mm & thickness 0.50 mm, conforming to IS - 1573, zinc coating 120 gm/sqm , pitch of barbs 25.00 mm (g) Handle, clips (minimum 5 clips per 2 spiral) and spikes to be provided as required complete

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new plastered wall surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

S&F aluminium powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries

S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries

S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified and directed. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size not less than 60 mm wide & 500 mm long, with ABS chromium plated bracket guard and railing complete all as specified and directed. Make:- Prayag/ M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range)

S&F towel rail, 18 mm (minimum) dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F 3.00 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty/wooden beads in square n.exc. 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington

S&F 5 mm thick tinted glass and glazing with oil putty / wooden beads in square exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.

S&F rolled mild steel conforming to Fe-290 (Gde-E-165) quality-A as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd./ M/s Dura Roof Pvt Ltd.

All as per Sl item No. 1.54 above but plain steel sheet.

S&F GI frame work for seamless ceilng comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with contacting clips across the intermediate channel at 457 mm centre to centre hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed. Make :- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products

S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made of aluminium / GI complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware/ Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) Make of waste fitting - Prayag / M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and excluding connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware/ Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)

S&F vitreous china bowl urinal flat back, of size not less than 265 x 315 x 440 mm, white, with & including chromium plated urinal spreader & grating and union for discharge pipe complete all as specified and directed. Make:- Hindware/ Cera (Med Range) / Essco

S&F vitreous china urinal half stall type, of size not less than 375 x 390 x 590 mm, white including chromium plated urinal spreader & waste coupling complete all as specified and directed. Make:- Hindware/Cera (Med Range) / Essco

S&F vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. Make of Water Closet:- Hindware/ Cera (Med Range) / Essco Make of Seat cover:- Hindware/ Cera (Med Range) / Essco

S&F 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F 15 mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco)/ Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco)/ Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Hindware/ Cera (Med Range) / Essco Make of Bend Pipe:- Hindware (Less Italian Collection) / Cera (Med Range) / Essco

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall or floor complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

All as per Sl item No. 1.71 above but 110 mm bore.

S&F central hole basin mixer, brass, chromium plated, for mixing hot and cold water, with 450 mm Long Braided Hoses, screwed down for 15 mm bore pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F PVC (SWR) 75 mm bore bend of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

All as per Sl item No. 1.74 above but 110 mm bore.

S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

All as per Sl item No 1.76 above but 20 mm bore.

S&F 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed. Make:- Supreme / M/s Ori-Plast Limited / M/s SHK Polymers

M&L cutting chases in brick wall, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 1000 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 25 mm thick sand cushioning complete all as specified and directed. Make :- Lovely / Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thick screed bed in CM 1:4 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed. Make : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn

M&L vitrified paver tiles of size 300 x 300 mm and 8 to 10 mm thick (square / rectangular) as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd/ M/s Sunshine tiles Co(P) Ltd

M&L continuous brick edging; with burnt clay bricks of sub class B, with width equal to the depth of the brick; laid dry on edge including necessary earth work complete all as specified and directed.

M&L 40 mm thick damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F grating doom 100 mm dia of PTMT (minimum weight 25 gms) fixed to floor trap complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

M&L PCC 1:4:8, type D-2 using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

S&F 150 mm bore salt glazed stone ware (SGSW) drain pipes grade 'A' laid in trenches & jointed in CM 1:1 and tested complete all as specified and directed.

M&L 16-18 mm thick granite (of any type) tiles machine cut, bedded over & including 20 mm thick screed bed in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd/ M/s Sunshine tiles Co(P) Ltd

M&L coloured digital glazed ceramic wall tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd/ M/s Sunshine tiles Co(P) Ltd

S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. Species of timber :- Gamari (Gnelina arborea) / Chickerassy (Chukrasia Tabularis) / Siris (Albizzia procera) / Kalasiris (Albizzia Odoratissima)

S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE) / M/s Archidply industries ltd

M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L preparation of new plastered wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer complete all as specified and directed. Make:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd

M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. complete all as specified and as directed.

BOQ Part-II (E/M Work)

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)

All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on same board.

All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on independent board.

M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)

M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)

All as per item No. 3.05 above but with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire.

S&F MCB DB, SPN 8 way, IP-30, IK08, single door type, with 100A copper neutral and earth bus bar for fixing MCB, fixed flush to wall & making good the disturbed surfaces complete all as specified and directed. Make:- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)/ M/s HPL Electric & Power Ltd

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / Havells (Brand-Max³, EURO-II) / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro) / C&S/ M/s HPL Electric & Power Ltd

S&F MCB SPN 40 to 63 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / Havells (Brand-Max³, EURO-II) / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)/ M/s HPL Electric & Power Ltd

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:- Havells / Anchor / Legrand

S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F angular lamp holder, PVC / Polycarbonate type with back plate for fixing of retrofit lamp 240 volt complete all as specified and as directed. Make :- Havells / Anchor / Legrand

S&F switch piano flush type one way, 15 / 16 Amps, 240 volt complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F socket outlet 5 pin 5 / 6 Amps, 240 volts complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F socket outlet 2 in 1, 6 pin, 5 & 15 Amps, 240 volts complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F LED light fitting 1 x 20 watt batten type 230 Volts, extruded aluminium housing, with luminous efficacy, 100 lumen / watt (minimum), suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells/ Bajaj Electricals Ltd

S&F LED light fitting 1 x 9 / 10 watt, 230 Volts, 2 feet long, extruded aluminium housing & extruded polycarbonate diffuser, suitable for surface mounting, system efficacy 100 Lm/watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), PF 0.90 (minimum), THD 10% (Maximum), with integrated high effeciency electrnoic driver with APFC, in-built surge protection 5 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells/ Bajaj Electricals Ltd

S&F exhaust fan 200 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint complete all as specified and as directed. Make :- Havells / Orient / Ram Ratna Electricals Ltd (RRE)

S&F exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint complete all as specified and as directed. Make :- Havells / Orient / Ram Ratna Electricals Ltd (RRE)

S&F geyser of capacity 25 Litres, 230V, 50Hz, vertical, wall mounted type, BEE 5 star rated, ABS outer body, inner tank with vitreous enamel coated, incoloy glass coated heating element, adjustable thermostat for temperature regulation, multifunctional safety valve with & including 3 core copper cable of 1 to 2 metre length with 3-pin plug of 16A capacity, fixing arrangement such as. bracket, nuts, bolts washers etc. complete all as specified and directed. Make:- V-Guard / Bajaj / Usha / Crompton Greaves / Jaquar & Company Pvt. Ltd.

S&F metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve complete all as specified and directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian/ C&S/ M/s HPL Electric & Power Ltd

S&F 9 / 10 watt LED Bulk head fitting including electronic driver and SMD LED lamp, polycarbonate housing & opal polycarbonate diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP-65, PF 0.95 (minimum), THD 10% (maximum), in-built surge protection 5 KV (minimum) including electrically connecting from celing rose to light fitting complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells / Bajaj Electricals Ltd

S&F automatic hand dryer made of rust proof ABS plastic body 1800 W, motor speed 2400 R/min with touch free operation, hand drying time 15-20 second complete all as specified and directed.

S&F 12 watt LED lamp with B22 base complete all as specified and as directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells/ Bajaj Electricals Ltd

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.

M&L test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed.

S&F synthetic PVC insulator sutable for fixing 4 mm dia GI wire earth continuity conductor to wall / roof including necessary nut, bolts, washers etc. complete all as specified and as directed.

S&F LED street / security light fitting 1 x 20 watt, integrated type with high efficiency electronic driver, pressure die cast aluminium housing & PC diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 70 (minimum), IP-65 (minimum), PF 0.90 (minimum), THD 10% (Maximum), in-built surge protection 5 KV (minimum) internally prewired and complete all as specified & directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells/ Bajaj Electricals Ltd

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

DEBABROTA ROY CHOWDHURY

KARMIBRINDA

PS ENTERPRISE

SHRI ARUN BHATTACHERJEE

Jagatbandhu Enterprises

S GUHA

MS UNITY CONSTRUCTION CO